KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022

Square Reflective Cable Type 100mm specification *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". *2 The FDA's (CDRH) laser classification is based on IEC608 ...

KEYENCE Ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-F51C3PD Flat Permeability Type M8 Connector Type 0.6m *1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, ending with "L" ...

IX-055 sensor head 55 mm specification *1 X: Laser long dimension direction, Y : Laser short dimension direction *2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction. *3 Positive alignment at the reference distance

Installation Status: Diffuse Reference distance: 300 mm Enclosure Rating: IP67 (IEC60529)*8 Ambient light: Incandescent lamp: 10,000 lux*9 max Ambient temperature: 0 to +45 °C*10 Relative humidity: 85%RH or less (non-condensing) Seismic resistance: 1 ...

Detection distance: 2m M12 connector cable type Laser classification 2 specification *1 Can be displayed from 50 to 2200. *2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50. *3 I/O can be advanced from the following combinations ...

Connector cable M8L word 2m PVC specification This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series OP-85497 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.

Square Reflective M8 connector type 250mm specification *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". *2 The FDA's (CDRH) laser classification is based on the IE ...

Power cable for MU-N series End Shape: Cable Termination: 4-core loose wire, Controller: Connector Length: 2 m Material: PVC (Vinyl Chloride) Remarks: For the main unit Weight: approx. 120 g This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser transmitter ...

Power cable for MU-N series End Shape: Cable Termination: M12 4pin Straight, Controller: Connector Length: 0.3 m Material: PVC (Vinyl Chloride) Remarks: For the main unit Weight: approx. 30 g This article introduces the KEYENCE/KEYENCE amplifier built-in type of TOF...

Slit plate φ0.5 mini for ultra-thin Type: Slender Small, slender and elongated Number of Builts: 1pcs Slit plate size: ø0.5 Material: SUS304 Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only Weight: approx. 1 g This article introduces ...

KEYENCE/KEYENCE Square Reflective Type (Background Suppression) Cable Type 30mm PR-FB30N1 specification This article introduces the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series PR-FB30N1 products.

Main functions: sensor head calculation, contour adjustment, filter, smoothing, averaging, position adjustment, OUT name change, measurement mode selection (Height, Position, Gap, Width, Center Position, Cross-sectional Area, Crossing, Angle, Contour Comparison, Contour Tracking), Zoom...

KEYENCE Sensor Head LJ-V7200 Mounting Status: Diffuse Reflection Reference distance: 200 mm Enclosure rating: IP67 (IEC60529)*7 Ambient light: Incandescent lamp: 10,000 lux*8 max Ambient temperature: 0 to +45 °C*9 Relative humidity: 85%RH to ...

Fixing screws 65mm Summary: Screws to fix the adjustable bracket for the LR-Z series. Target products: LR-Z series Length: 65 mm Material: Bolt: Nickel Plated Copper, Nut/Washer: Nickel Plated Iron Weight: approx. 80 g This article introduces the KEYENCE/KEYENCE ultra-miniature ...

NFPA79 standard Ethernet cable L-type 2 m Length: 2 m Note: Used for the connection between sensors, PCs or Ethernet switches. When using the IV series as a UL certified product, use an NFPA79-capable Ethernet cable. This article introduces KEYENCE/KEY...

Square Reflective Type M8 Connector Type 100mm specification *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". *2 The FDA's (CDRH) laser classification is based on the IE ...

Type: Optical fiber with indicator type (visual receiver) Threaded hexagonal fiber Optical axis diameter Beam: ø 1 mm Reception: ø 3.2 mm Size M4 The length of the fiber optic unit is 2 m and can be cut freely Diameter of the fiber optic unit ø 2.2 Shape: Hexagonal Small...

Square type High power reflective type M8 connector type 500mm specification *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". *2 Cleaned by each company ...

Introduction: A new standard for laser displacement sensors. An ultra-miniature laser coaxial displacement meter suitable for most installation spaces and applications. Product parameters We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management. ...

Base distance: 30 mm Measuring distance: 20 to 45 mm Enclosure rating: IP67 Pollution level: 3 Ambient light: Incandescent lamp: 5,000 lux*5 Ambient temperature: -10 to +50 °C (no condensation, no freezing) Relative humidity: 35 to 85 % RH ( ...