Introduction: The powerful internal position mode of the new Shida/STEP general-purpose servo K1 series can plan multi-path continuous operation to achieve rich motion control functions; Up to 32 sets of data plans are supported, and each set of data can be based on demand. Find and set the number of pulses or angles, and set the speed, acceleration, deceleration and emergency deceleration of the internal position mode;
Features:
Mechanical resonance frequency analysis, equipped with two sets of notch filters, which can adjust the frequency (50 - 5000Hz) and notch depth, effectively overcome the low-frequency resonance and vibration at the end of the machine, and can set the vibration frequency (1 - 100Hz) and vibration damping;
The friction torque compensation function can reduce the influence of static friction during mechanical commutation and improve the command following performance of low-speed operation.
Debugging software support, can be mechanical characteristics analysis, parameter setting, monitoring and other functions, intuitive and simple operation.
Product parameters
Supply voltage: single-phase or three-phase 220VAC (-15-+10%), 50-60Hz
Output: 220V ( 0.4kW, 0.75kW, 1.5kW, 2.2kW, 3kW, 5kW), K1 series 380V (5kW, 7.5kW)
Encoders: 2500-line incremental/wire-saving encoders, 17bit/20bit/23bit absolute encoders
Digital IO signal: 4 channel input and 3 channel output can be set functionally
Analog signal: 2 inputs
COMMUNICATION: RS232, STANDARD MODBUS PROTOCOL, CANOPEN BUS
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the new Shida/STEP universal servo K1 series products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
New Time/STEP PCI 6-axis motion control card ADT-8960 **High pulse frequency 2MHz
Introduction: STEP PCI six-axis motion control card ADT-8960 is one of the members of STEP PCI bus-based twelve-axis motion control card of STEP based on computer PCI bus, one system can support up to 16 control cards, can control 96 servo/stepper motors, plug and play. Mainly used in multi-axis ...
|
|
New Time Reach/STEP DDR motor servo drive QXR
Introduction: XINSHIDA/STEP DDR motor servo driver QXR The high-performance pulsed DDR motor servo driver of the new time QXR series integrates the world's cutting-edge servo control technology, and its excellent drive performance has reached the highest level.
Product features:
Scaling performance is excellent ...
|
|
Xinshida/STEP multi-axis servo Ωm-N1 four-axis in one
Introduction: Xinshida/STEP multi-axis servo Ωm-N1 is a multi-axis product launched by Sigriner, including rectifier unit (AC200V), three-axis integrated and four-axis integrated drive unit (DC300V). The rectifier unit and drive unit can be flexibly configured. The system adopts EtherCAT bus communication, supporting ...
|
|
Xinshida/STEP high-performance servo drive QXM IO10 in and 9 out
Introduction:Xinshida/STEP high-performance servo drive QXM has excellent expansion performance, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit speed-up, electronic cam, gantry synchronization, capture comparison and other functional characteristics, which are widely used in point ...
|
|
New Time/STEP servo motor 180B current 9~19A
Introduction: New Time/STEP servo motor 180B, photoelectric pulse encoder/value encoder/resolver
Specifications
Rated power: 2.9kW-7.5kW
Rated line voltage: 3-phase 380VAC (-15-+10%), 50-60Hz
Forehead...
|
|
New time/STEP universal servo drive QX-B2 positioning compensation function
Introduction: STEP universal servo drive QX-B2 is a compact all-digital intelligent servo drive based on new DSP technology, which is developed with digital signal processing technology and has high overall efficiency. Not only can the traditional high-performance spatial vector (FOC) algorithm be used, but also the
|
|
Xinshida/STEP servo motor 180ST
Introduction: Xinshida/STEP servo motor 180ST
Product parameters
Power range: 2.7kW - 4.5kW
Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz
Rated line current: 10.5A——16A (220V A ...
|
|
Xinshida/STEP servo motor 60ST rated speed 3000rpm
Introduction: Xinshida/STEP servo motor 60ST
Product parameters
Power range: 200W-600W
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 1.2A——3.5A
Rated speed: 3000rpm
...
|
|
Xinshida/STEP servo motor 110ST 2500-4000rpm
Introduction: Xinshida/STEP servo motor 110ST
Product parameters
Power range: 1.3kW - 1.7kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 6.5A——9.5A
Rated speed: 2500 ...
|
|
Xinshida/STEP integrated all-in-one servo SS series pulse control
Introduction: Xinshida/STEP integrated all-in-one servo SS series adopts 32768 high-resolution encoder, the position control is more accurate, within 3000rpm, and the rated torque output can be guaranteed at any speed.
Features:
Compared with ordinary AC servo:
Below 36V ...
|
|
New Time/STEP servo motor 130S3H rated speed 1500rpm
Introduction: New Time/STEP servo motor 130S3H, servo motor, AC servo motor, permanent magnet AC servo motor
Specifications
Rated power: 1.3kW-2.3kW
Rated voltage: 220VAC (-15-+10%), 50-60Hz
Torque Rating: ...
|
|
New Time/STEP servo motor 60S2S rated speed 3000rpm
Introduction: New Time/STEP servo motor 60S2S
Specifications
Power range: 200W-400W
Input Voltage: AC – 220V
Rated torque: 0.64N.m-1.27N.m
Encoder Type: 2500-line incremental/line-saving encoder, ...
|
|
The power supply voltage of the STEP multi-axis servo KAD series is 220VAC
Introduction: The powerful internal position mode of the STEP multi-axis servo KAD series can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, and each set of data can be set according to the needs of the number of pulses or angles, and can be set internal ...
|
|
The high-performance servo drive QXE has a built-in PLC
Introduction: Zhongweixing QXE series bus type high-performance servo drives integrate the world's cutting-edge servo control technology, and its excellent drive performance has reached the highest level. Excellent expansion performance, fast response, positioning, vibration suppression, automatic parameter design, programmable, operation ...
|
|
The voltage of the iK2 series of universal bus type is 220VAC
Introduction: The powerful internal position mode of the iK2 series of universal bus servo can be planned for multi-path continuous operation to achieve rich motion control functions; **Support more than 32 sets of data planning, each set of data can set the number of pulses or angles according to needs, and can set the quantity...
|
|
Xinshida/STEP servo 80SS series rated current 4A-4.9A
Introduction: Xinshida/STEP servo 80SS series, rated power: 750W-1000W
Product parameters
Rated power: 750W——1000W
Number of pole pairs: 5
Rated torque: 2.39N.m——3.18N.m
Maximum torque: 7.2N.m——9. ...
|
|
New Time/STEP General Bus Type 380V Servo iKBS Series 2500-Wire Incremental Encoder
Introduction: Powerful internal position mode can plan multi-path continuous operation for rich motion control functions; It can support 32 sets of data planning, and each set of data can set the number of pulses or angles according to needs, and can set the speed, acceleration, and deceleration of the internal position mode.
|
|
Xinshida/STEP servo motor 110B rated speed 2000rpm
Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Rated power: 0.4kW - 1.2kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2. ...
|
|
New Time/STEP servo motor 80ST rated line voltage 220V
Introduction: STEP servo motor 80ST
Specifications
Power range: 0.4KW-1KW
Rated line voltage: 220V
Rated Line Current: 2A-3A
Rated speed: 2000RPM-3000RPM
Rated torque: 1.27N ...
|
|
Xinshida/STEP servo motor 150ST input voltage 220V
Introduction: Xinshida/STEP servo motor 150ST
Product parameters
Power range: 3.0kW - 5.5kW
Input voltage: 220V
Rated line current: 14A-27A
Rated speed: 2000PRM-2500RPM
Rated torque: 15N ...
|
|
Contact
working hours
