FANUC will bring 10 sets of advanced automation solutions in the industry
In the four major processes of automobile production and the production process of auto parts, robots make the manufacturing process more automated and intelligent, and the application of robots is becoming more and more extensive.
CRX cobot welding
Drag teaching: The highly flexible CRX collaborative robot can be easily dragged to realize drag teaching, which is convenient to operate and has high efficiency, and is very suitable for welding small batches of multi-batch workpieces
In combination with the Arc Tool software package, you can achieve high-quality welds to your workpieces
The cobot lamp screws are tightened
The new collaborative robot CRX-10iA/L cooperates with screw tightening and hot riveting module to realize the tightening and hot riveting of lamp screws
The new fixed tightening hot riveting module, fixed to the end of the cobot, can safely cooperate with the operator, and at the same time can meet the needs of multi-angle and different depth screw tightening
With cobots, there is no need for safety fences, the workspace is shared with people, and the robot does not need to stop the operation during manual feeding, and the production capacity can be increased between the drip and the drip can be increased
Smart spot welding
The robot is equipped with a small, lightweight welding torch and a gripper, enabling spot welding and automatic part change
The robot is mounted on the ground-mounted walking axis, which increases the working space of the robot
The robot PMC software is used to control the signals of the system logically, without the need for additional PLC, which reduces the cost of the system
Car door handle grinding
Automatic trajectory generation: The grinding trajectory is free of teaching function, guiding the robot to complete the grinding
High trajectory accuracy: The high-precision robot LR Mate 200iD/7L is used, and the repeated positioning accuracy is within ±0.018mm
High-quality and high-flexibility grinding: the wet grinding process is used to grind by the belt grinding machine and the electric spindle to meet the grinding needs of complex workpieces
Dramatically reduce engineer commissioning time and maintenance costs, and improve product quality
Robotic automated pipe bending
A solution for flexible robot pipe bending of multi-specification pipe fittings
Servo bending tool: controlled by FANUC robot extended servo motor, using C-shaped bending structure to ensure structural rigidity, maximum bending speed: 360deg/s, maximum bending length: 3000mm
The robot pipe bending system has the characteristics of flexibility and high degree of automation, and the mold supports multiple bending radii, which can realize multi-product pipe bending
Easy programming: support the function of one-click generation of pipe bending processing coordinates and robot trajectory program
Intelligent visual hybrid destacking of crankshaft and cylinder head
FANUC 3D wide-area sensors identify and locate crankshafts and cylinder heads in loose piles in baskets
The robot is equipped with ATC automatic hand change technology, which can automatically change the hand claw to grab workpieces of different shapes and sizes to achieve flexible production
The electromagnetic lock is combined with the robot dual-channel safety detection function (DCS), and the personnel can also safely change the basket even if the robot does not stop
The robot PMC software is used to control the system signal logically, without the need for additional PLC, which reduces the system cost
Dual laser tracking welding
Laser tracking welding solution for automotive tubing robots
High-quality welding: Laser vision systems help robots precisely locate welds
Adaptive welding function: It can automatically adjust the welding parameters and compensate for the weld assembly error
Built-in welding process expert database: a powerful database for welding quality control and product quality tracking
Automatic processing of oil pan machine
The image acquisition speed of the 3D vision sensor has been greatly improved, and it can identify and locate scattered workpieces in as little as 0.4 seconds
The spindle of the small machining center is characterized by high acceleration and short acceleration time of 0.16 s from 0 to 10,000 rpm, which effectively reduces the tool change time. For the automotive parts processing industry, which requires frequent tool changes, the machining efficiency can be greatly improved
|
More on that
|
Introduction to the main parameters of Fanuc robot
Fanuc robots have 2-axis, 3-axis, 4-axis, 5-axis and six-axis robots.
On each control axis of the FANUC robot, there is an origin position and a movable range. Overtravel detection is performed at both ends of the movable range on each axis ...
|
|
Walking into the robot factory, Jiangxia and Chegu "specialized, special and new" enterprises talk about "intelligent changes" across the river
On March 15, the "Intelligent Transformation and Digital Transformation" Technology Exchange Meeting of "Specialized, Specialized and New" Enterprises in Jiangxia District was held in Wuhan Intelligent Transformation Consulting and Diagnosis Platform - Wuhan Fanuc Robot Co., Ltd. (hereinafter referred to as "Fanuc"). From Jiangxia District to Wuhan Economic and Technological Development Zone, in Jiangxia District economic and information ...
|
|
On Labor Day, leave all the work to FANUC robots!
Use the power of science and technology to highlight the glory of labor!
When it's May Day again,
Happy Labor Day to all!
Presumably you have arranged a full travel plan,
It doesn't matter, you can rest assured that you can take a vacation,
The work of the production line will be left to FANUC robots.
They are "...
|
|
Unlock the real "industrial" cobots, and take a sneak peek at the press conference review!
Safe, reliable and easy to use
All models are equipped with IP67 protection level as standard.
Cope with harsh industrial environments and ensure stable operation
The rate of joint failure is low
Inherit the product development concept of "high reliability" of Fanuc
Adopt characteristic servo motor + reducer
Reducer
Harmonic reducer transmission ...
|
![FANUC FAQ - [ROBOSHOT] When inert gases such as nitrogen are used in molding operations](https://www.76kj.cn/data/attachment/forum/202205/26/094101yzyez922plbb33pg.jpg)
|
FANUC FAQ - [ROBOSHOT] When inert gases such as nitrogen are used in molding operations
Check whether the oxygen concentration is abnormal at any time
|
![FANUC FAQ - [ROBOSHOT] products appear burr](https://www.76kj.cn/data/attachment/forum/202202/17/094156oxjmw8l35xif6fjf.jpg)
|
FANUC FAQ - [ROBOSHOT] products appear burr
Reconfirm the mold closing origin, readjust the mold, and confirm the clamping mechanical structure
|
|
Fanuc - Exploring the new trend of optoelectronics
FANUC will bring precision injection molding of HUD lenses, human-machine interaction of CRX collaborative robots, and leading factory IoT solutions.
HUD lenses are precision injection molded
The new generation of ROBOSHOT is equipped with a 21.5-inch capacitive screen, which is easier to operate
Improved exhaust air through the pre-injection function, ...
|
![FANUC FAQ - [ROBOSHOT] Molding conditions input lock password lost](https://www.76kj.cn/data/attachment/forum/202203/04/105418ffn3xjj0bo0fxnmn.jpg)
|
FANUC FAQ - [ROBOSHOT] Molding conditions input lock password lost
While powering on, press and hold the "Device Settings" and "Reset" keys to reset the password
|
|
Fanuc FAQ - TP button to start the program
After setting the program to macro, it can be started by pressing a button on the TP (macro startup is set to UK method)
|
|
Fanuc FAQ – pause and start again
The robot has no alarm, UI signals 1, 2, 3, 8 are ON, UO signal 1 is ON, and the 6th startable program of sending pulse UI signal continues to run
|
|
Concerned about the machining enterprises in the disaster area of Zhuozhou, the after-sales team of Beijing Fanuc has made every effort to help
Under the influence of the strong typhoon "Dusuri", extremely heavy rainfall hit the Beijing-Tianjin-Hebei region. Affected by extremely heavy rainfall, the water level of many rivers in Zhuozhou City, Hebei Province has skyrocketed, and the risk of river flooding and urban waterlogging has intensified, and some villages and towns have been besieged by floods, and water and electricity have been cut off.
Under the siege of floods, many businesses ...
|
![FANUC FAQ - [ROBOSHOT] The temperature of the barrel cannot be heated](https://www.76kj.cn/data/attachment/forum/202202/21/100113cstchtkkkk55pspt.jpg)
|
FANUC FAQ - [ROBOSHOT] The temperature of the barrel cannot be heated
Check whether the empty opening is tripped
|
![FAQ - [ROBODRILL] The device has no alarm but does not work](https://www.76kj.cn/data/attachment/forum/202201/14/095248d5w95q5635t46nw6.jpg)
|
FAQ - [ROBODRILL] The device has no alarm but does not work
Check whether there is a drop in air pressure in yellow during the alarm/diagnosis, and if so, it is recommended to check that the device is connected to the air supply
|
![FANUC FAQ - [ROBOSHOT] The screw cannot be moved](https://www.76kj.cn/data/attachment/forum/202203/07/134423yrzrv4juf6ze44vd.jpg)
|
FANUC FAQ - [ROBOSHOT] The screw cannot be moved
Check the temperature conditions, check the measurement conditions
|
![FANUC FAQ - [ROBOSHOT] Perform the operation of the oil supply button](https://www.76kj.cn/data/attachment/forum/202205/09/100843ytc9x2q3zl8r3888.jpg)
|
FANUC FAQ - [ROBOSHOT] Perform the operation of the oil supply button
The oil supply button cannot be operated during the exchange of oil in the cartridge, during the oil supply, or during the depressurization of the oil supply of the equipment
|
![FANUC FAQ - [ROBODRILL] How to disassemble the four axes](https://www.76kj.cn/data/attachment/forum/202201/17/100201wdntd8fr2jjpao8n.jpg)
|
FANUC FAQ - [ROBODRILL] How to disassemble the four axes
After unplugging the three cable plugs of the four axes, you can do it from the zero point for the next installation, and if it is a device before MiA, you need to buy a short connector for the amplifier
|
|
Labor is not "short", CRX collaborative robots let people and machines "go both ways"
With the gradual disappearance of the demographic dividend, there is a large gap in the supply of talents in the manufacturing industry, and the dilemma of insufficient quality and quantity is facing, and the pace of "machine generation" is accelerating in various fields. With its excellent performance and flexible application, FANUC collaborative robots are used in many application scenarios ...
|
|
In 58 days, the painting robot transformation project of FAW-Volkswagen Plant 2 was completed
On January 14, FAW-Volkswagen 2020 Supplier Partner Conference was held in Changchun. As a core supplier of FAW-Volkswagen, Shanghai Fanuc Robot Co., Ltd. was awarded the FAW-Volkswagen Award for its outstanding performance in the technical transformation project of FAW-Volkswagen Plant 2.
|
![FANUC FAQ - [ROBOCUT] processing breakage](https://www.76kj.cn/data/attachment/forum/202207/25/092646xan4bt2cmqcmcr4i.jpg)
|
FANUC FAQ - [ROBOCUT] processing breakage
Adjust the position of the rear cable runner and the tension sensor, clean the upper and lower machine heads and connecting cables, and clean and check the lower wire runner rollers
|
![FAQ about Fanuc - [ROBODRILL] about fog collector requirements (basic top cover)](https://www.76kj.cn/data/attachment/forum/202202/08/092639e3s1nnun6tys767t.jpg)
|
FAQ about Fanuc - [ROBODRILL] about fog collector requirements (basic top cover)
Both the standard spindle and the high-speed spindle are more than 7m³/min
|
|
Contact
working hours
