Introduction:Kinco MT100 HMI Power consumption: 7W@ DC24V, input range: DC10.8V-DC28V, withstand voltage performance: 500VAC for 1 minute, main frequency 792MHz, memory 64MB; A new generation of Kinco DTools configuration software, powerful, easy to use.
peculiarity
Mass series human-machine interface IoT type
- 10.1", HD display, 256K color;
- Frequency 792MHz, RAM 64MB;
- Install snap seal design, waterproof and oil-proof;
- Triple serial port design, and COM0 and COM1 support RS485 at the same time;
- A new generation of Kinco DTools configuration software, powerful, easy to use.
parameter
HMI Basic Specifications
Display size: 10.1" TFT
Display Area: 222.72 (W) x 125.28 (H)
Resolution: 1024x600 pixels
Display color: 256k color
Display Angle: 85/85/85/85 ( Left / Right / Top / Bottom)
Contrast ratio: 500:1
Backlight Type: LED
Brightness: 300cd/m²
LCD life: 50000 hours
Touch panel: 4-wire precision resistor network (surface hardness 4H)
CPU:ARM RISC 32Bit 792MHz
Memory: 128MB NAND flash + 64MB DDR3 memory
RTC & Recipe Memory: Built-in real-time clock +256KB
Expandable Memory: 1 USB Host
Print port: USB Slave/serial port
Network Access: None
Program Download: USB Slave (Micro USB) / Serial Port
Communication interface: COM0: RS232/RS485/RS422; COM1:RS485; COM2:RS232
HMI Structural Specifications
Housing Material: Engineering Plastic
Dimensions: 271*213*38(mm)
Installation opening size: 260*202(mm)
Weight: 1.1Kg
HMI Environmental Specifications
Working environment temperature: 0-50°C
Working environment humidity: 10-90%RH (non-condensing)
Storage temperature: -20-60°C
Storage environment humidity: 10-90%RH (non-condensing)
Sinusoidal vibration test: 10-500Hz, 30m/s², triaxial/1 hour
Cooling method: natural air cooling
HMI Electrical Specifications
Input range: DC10.8V - DC28V
Power consumption: 7W@ DC24V
Allowable power loss: <3ms
Insulation resistance: more than 50MΩ@500VDC
Withstand voltage: 500VAC for 1 minute
HMI Product Certification
Panel protection level: IP65 certified (4208-93)
CE certification: passed CE certification (test standard: EN61000-6-4:2007+A1:2011, EN61000-6-2:2005)
HMI software
Configuration software: Kinco DTools V3.5.2 or later
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
This article introduces the Kinco/Buke MT100 HMI Power consumption: 7W@ DC24V products, if you are interested in Kinco/Buke HMI, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kinco/Buke HMI GL043E Power consumption: 2W@24VDC
Introduction: Kinco/Buke HMI GL043E Power consumption: 2W@24VDC, brightness: 450cd/m², beautiful appearance, ultra-thin body; Resolution: 480×272 pixels, touch panel: 4-wire precision resistor network (surface hardness 4H).
peculiarity
Suitable for small space occasions; ...
|
|
Kinco/Buke HMI GT100E-WiFi 16.7M True Color Built-in Wi-Fi
Product introduction: GREEN series HMI GT IoT HMI 10.1"; HD display, 16.7M true color; Support Ethernet, built-in Wi-Fi function; Powerful scripting function to support edge computing; Built-in IoT function to support remote service.
Basic specifications
...
|
|
Kinco HP series touch screen PLC all-in-one machine Power supply voltage DC 24V
Introduction: Kinco HP series integrates HMI and PLC, which is an economical hybrid product launched by Buke company. Under the premise of ensuring rich functions, high performance and high reliability, the all-in-one machine optimizes the hardware design and has good integration, eliminating the connection between PLC and HMI, and also eliminating the direct connection between the two.
|
|
Kinco MT070 HMI Withstand voltage: 500VAC for 1 minute
Introduction:Kinco MT070 HMI Withstand Voltage: 500VAC for 1 minute, Resolution: 800*480 pixels, Weight: 0.5Kg, 7", HD display, 256K color, triple serial port design, and COM0 and COM1 support RS485 at the same time, a new generation of Kinco DTools configuration software ...
|
|
Kinco/Buke HMI GH043U2 Kinco DTools V3.3
Product introduction: Kinco HMI GREEN series subway, high-speed rail and other rail transit preferred models, motherboard rugged treatment to effectively cope with complex use environment, built-in isolated power supply to enhance reliability, dual USB Host design, can be connected to USB interface devices or U disk before and after.
...
|
|
Kinco K2 series PLC baud rate is 115.2kbps
Product Introduction
The K2 series PLC is an economical product of the K series (some are not scalable), which improves the performance and reduces the cost on the basis of the K5 series, and has a very high cost performance.
Key features:
• Provide USB programming port, and can be debugged by USB power supply, which is convenient ...
|
|
Buke low-voltage servo drive FD114S/124S/134S/144S/FD164S
Features:
Support single-axis, two-in-one;
Support pulse;
Support Modbus\Canopen\EtherCAT communication control;
Low-voltage DC power supply to meet the power and power supply needs of mobile trolleys;
New miniaturized terminal design for more compact size, ...
|
|
Kinco FMC Frameless Torque Motor Voltage VDC: 48V
Introduction: Frameless torque motor is different from the traditional servo motor, there is no casing, only stator and rotor 2 components, compared with the framed motor, the frameless motor configuration is flexible, easy to install, focusing on the current trend of high integration of the drive system, it can be said that the frameless motor is more suitable for engineers ...
|
|
Kinco KS series PLC 4-channel high-speed pulse output
Product Introduction
Significant installation space savings:
The compact design of the thin sheet, with a thickness of less than 25mm, can be installed in very small electrical cabinets
Higher Computing Speed:
Using the new MCU platform, the scanning cycle of 1000 bit instructions is 0.25ms, which can reach the same kind of small PLC...
|
|
Kinco CV20 series inverter carrier frequency 6kHz
Introduction: Kinco high-performance vector inverter CV20 series inverter carrier frequency 6kHz, output frequency 0-300Hz.
peculiarity
Output frequency 0-300Hz
V/F control and programmable V/F curves
Carrier frequency 6kHz
Automatic torque boost and automatic slip ...
|
|
Kinco FM series bus stepper driver power supply voltage: DC24V-70V
Introduction: Kinco FM series bus stepper driver power supply voltage: DC24V-70V, support RS232 serial port communication, with rich IO function settings, support origin, multi-section speed, multi-stage position and other control modes.
Key features:
• Support Modbus/Canopen/E...
|
|
Kinco iWMC Integrated Servo Wheel Protection Grade: IP54
Introduction: Kinco iWMC integrated servo wheel Protection level: IP54, atmospheric pressure: 86kpa-106kpa, energy consumption braking: external braking resistor is required (according to the operating situation, mainly used in the occasion of rapid start and stop).
peculiarity
Highly integrated: ...
|
|
AK800M motion controller with 24 digital inputs
Introduction: 4M program storage space, 8M data storage space, the controller body integrates 24 digital inputs and 24 digital outputs, 2 CAN bus masters, and built-in termination resistors.
Key features:
Cortex A9 800MHZ 32-bit RISC CPU;
4M ...
|
|
Kinco K2 series PLC baud rate up to 115.2kbps
Introduction: K2 series PLC is a K-series economical single product (some are not expandable), which improves performance and reduces costs on the basis of K5 series, and has excellent cost performance.
Key features:
USB programming port is provided, and it can be debugged by USB power supply, which greatly improves the convenience;
...
|
|
Kinco/Buke HMI G070E USB Slave (Micro USB) U disk network port
Product introduction: Kinco HMI GREEN series built-in isolated power supply enhances reliability, high-brightness LCD better display effect, supports CAN bus, and three serial ports meet diverse needs.
Basic specifications
Display size 7" TFT
Display area ...
|
|
Kinco CZ10 Automotive HMI Rated voltage: DC24V
Introduction: Kinco CZ10 on-board HMI Rated voltage: DC24V, input range: DC9V-DC36V, dual CAN port design, support CANOpen/CANJ1939, dual video input, perfect for multi-channel monitoring.
peculiarity
RISC Cortex-A8 800Mhz ...
|
|
Kinco HMI G121E 4-wire precision resistor network 12.1 inch
Product introduction: Kinco HMI GREEN series NXP industrial-grade CPU, more than 10 years of ultra-long supply; 12.1", 4:3 ratio provides a larger display area, and the highlight is clearer; Support external SD CARD, U disk, up to 256GB expansion; Built-in serial port isolation, isolated power supply to enhance reliability ...
|
|
Kinco CZ6 HMI Rated voltage: DC24V (isolated)
Introduction: Kinco HMI CZ6 is a human-machine interface designed for harsh environments, using a wide temperature LCD screen, and the working temperature is -20°C-60°C; The good internal structure design and the application of silicone pad make the screen excellent in shock absorption and impact resistance.
peculiarity
The housing adopts high temperature resistance, ...
|
|
Kinco HMI GL043 USB Slave 450cd/m² 4.3" TFT
Product introduction: Kinco HMI GREEN series is suitable for small space occasions; Beautiful appearance, ultra-thin body; Cost-effective. Models for general applications; Beautiful appearance, ultra-thin body; Cost-effective.
Basic specifications
Display size 10.1" T ...
|
|
Kinco K2 series PLC 4-way high-speed counting input
Introduction: K2 series PLC is a K-series economical single product (some are not expandable), which improves performance and reduces costs on the basis of K5 series, and has excellent cost performance.
peculiarity
USB programming port is provided, and it can be debugged by USB power supply, which greatly improves the convenience;
...
|
|