KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50 (Detection Distance: 50mm)

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50 Laser Sensor Standard Cable Type (Detection Distance: 50mm)

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50 (Detection Distance: 50mm)

Model		LR-X50
type		Cable type
Detection distance		25.0 to 50.0 mm
Standard detection segment difference		0.5 mm
Display resolution		0.1 mm
The size of the spot		Approx. 0.2 mm × Approx. 1.5 mm
		(detection distance of 50 mm)
Response time		500 μs*1 / 1 ms / 3 ms / 10 ms / 200 ms switchable
light source	type	Green laser (505 nm)
	Laser class	Class 1 laser products (IEC60825-1, FDA (CDRH) Part1040.10*2)
IO-Link		Specification v1.1 / COM2 (38.4 kbps)
function	Timer function	Timer Disable/Off Delay/On Delay/Single Pulse/On- Turn off Delay/Turn on Single Delay
Input and output	Control the output	NPN Open Collector / PNP Open Collector N.O. / N.C. Switched *3
		30 VDC or less, 50 mA or less, residual voltage 2 V or less
	External inputs	External Setting Input/Emission Stop/Zero Input/Reset Hold/Orientation Alarm Cancellation Switchable *3
		Short-circuit current NPN: 1 mA or less, PNP: 2 mA or less
		The input time is ON for 3 ms or more, OFF for 20 ms or more
		(25 ms ON or more, 25 ms OFF or more when tuning is selected only)
Protection circuits		Power supply reverse polarity protection, output overcurrent protection, output surge protection, output reverse polarity protection
power supply	Supply voltage	16 to 30 VDC (including ripple (P-P) 10% or less), class 2
	Power consumption	Typical: 970 mW (less than 38 mA at 24 V, less than 53 mA at 16 V)
		Economy mode ON and ALL: 821 mW (less than 32 mA at 24 V, less than 44 mA at 16 V) (except load current)
Environmental resistance	Enclosure protection grade	IP65 / IP67 (IEC60529)
	Ambient lighting	Incandescent lamps below 16,000 lux
		Daylight 16,000 lux or less
	Use ambient temperature	-10°C to +50°C (no freezing)
	Humidity of the working environment	35 to 85% RH (non-condensing)
	Vibration resistance	10 to 500 Hz power spectral density: 0.816 G2/Hz in the X, Y, Z directions
	Impact resistance	1,000 m/s2 (100 G) X, Y, Z 6 TIMES IN EACH DIRECTION
Material		Sensor head cover: SUS316L, sensor head lens cover: PSU
		Sensor head gasket: FKM (lens cap), EVM (cable)
		Cable: PVC, metal sheath*4: SUS304
		Amplifier Cover: PBT, Amplifier Indicator Window & Indicator: PAR, Amplifier Gasket: NBR, Button: POM
		Amplifier M8 connector*5 : SUS303
annex		Instruction manual, laser warning signs
weight		About 90 g

*1 When 500 μs is selected, the following limits are specified.

· Tuning is limited to 2-point tuning.

· The detection range shield is set during tuning. (Manual setting of the shielding range is not supported)

· Output 2 is limited to the output of alarms such as errors and orientation monitoring, and no standard/zone can be used.

*2 Classified according to Laser Notice No. 56 in the FDA (CDRH) on a IEC60825-1 basis.

*3 You can select input and output from the following combinations. Control output × 2. Control output + external input

*4 LR-X50CG / X100CG / X250CG only

*5 LR-X50C (G) / X100C (G) / X250C (G) only

This article introduces the KEYENCE/KEYENCE laser sensor LR-X series LR-X50 (detection distance 50mm) products, if you are interested in KEYENCE/KEYENCE sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50 (Detection Distance: 50mm)

Sections viewed

Contact

working hours