Hardware Problems and Solutions of Kunlun Tongtai MCGS Touch Screen(70-80)

31. Historical alarms are not displayed (1) "Automatically save the generated alarm information" is not selected in the attribute setting of the alarm data object; (2) The alarm data does not reach the upper/lower limit of the alarm value; (3) "MCGS_ALARM" is not selected for the group object. 32. ...

Infrared touch screen The infrared touch screen selects the infrared matrix densely packed in the X and Y directions to detect and locate the user's contact, the infrared touch screen is provided with a circuit board frame on the front side of the display, and the circuit board is equipped with an infrared emitting tube and an infrared receiving tube on the four sides of the screen.

One. The touch screen is not allowed Fault phenomenon: A surface acoustic wave touch screen, touching the part of the monitor screen with your finger can not complete the corresponding operation normally. Fault analysis and processing This phenomenon may be the reflection of the sound wave touch screen around the screen after a period of use.

1. Check the terminal port First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the contact ...

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. Fingers placed on the panel with a ...

1. After the MCGS screen is connected to the computer (USB connection, network cable connection is acceptable), in the download configuration window, click on the advanced operation, and there is a running environment upgrade button inside, click it, and wait for the upgrade to be completed. 2. In the download configuration window, click to make a U disk comprehensive function treasure, and then ...

What is the reason why the variable cannot be deleted? Use the Usage Count Check command to check variable usage, and then you can delete variables that aren't being used. If a variable cannot be deleted, it means that the variable is in use and cannot be deleted. Is it possible to view the device while it is running?

1. First of all, go to the MCGS official website to download the latest embedded version, and you can find the PPI of S7-200 in the "Equipment Toolbox", which is compatible with the driver of Siemens SMARTPLC. 2. Secondly, all non-board equipment in Kunlun MCGS is the first to pass ...

Four-wire touch screen The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...

1. The touch of some areas is accurate, and the touch of some areas is biased The main reason for this phenomenon is that a large amount of dust or scale dirt has accumulated on the sound wave reflection stripes on the periphery of the surface sound wave Kunlun Tongtai touch screen, which hinders the transmission of sound wave signals. At this point, you can clean the touch ...

Small capacity: The speculative configuration of the whole system requires only a very small storage space, which can be easily used with DOC storage devices; High speed: The system has high time control accuracy, and can easily complete various high-speed acquisition systems to meet the requirements of real-time control systems. Low cost: ...

1. The optical performance is the best. The clarity and light transmittance are the highest, the reflection is the least, and there is no color distortion, this is because the sound wave screen body is pure glass, unlike the resistive screen with multiple layers of composite film; The capacitive screen is coated with a layer of film on the surface, and the light transmittance is worse. 2. Anti-scratch and anti-barbaric use ...

Analysis and treatment method of touch all-in-one screen fault Fault 1: Touch deviation phenomenon: The position touched by the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Place...

The first channel of all non-board devices in Kunlun MCGS is the communication status channel. After entering the running environment, after the device driver starts working, the communication status of the device is returned in this channel, for example, 0 indicates that the device communicates normally, and non-0 indicates that it is abnormal. Elder brother...

61. 200PLC: What is the reason for the communication status jump (1) Whether the communication delay setting is too short, and set the appropriate delay time; (2) Whether there is interference on site, shielded wire and grounding can be used; (3) Refer to PLC "SMW22", see PLC running program ...

1. Prepare a USB flash drive of 8GB or less. Insert the USB port behind the touch screen, restart the touch screen, and quickly tap the progress bar when the process progress bar appears on the touch screen screen. 2. Click "System Maintenance". 3. Click Back up System Information. 4. Make sure the display path is us...

From the perspective of skill principle, the touch screen is a set of clear affirmative coordinate positioning system, first of all, it is necessary to ensure that it is transparent, so it is necessary to deal with the problem of transparency through information technology, such as digitizers, writing boards, elevator switches, they are not touch screens; Secondly it is Ken ...

1. Every day before turning on the device, scrub the screen with a dry cloth. 2. If a drop of water or a drink falls on the screen, the software will stop the response, which is due to the fact that the water droplets and fingers have similar properties, and the water droplets need to be wiped off. 3. The touch screen controller can automatically judge the dust, but the dust is too ...

The most far-reaching technological change in touchscreen performance is the shift from resistive to capacitive touchscreen technology. According to iSuppli, a market research agency, nearly 25% of touchscreen mobile phones will be transferred from resistive to capacitive touchscreens by 2011. Capacitive touch screen technology brings ...

Kunlun General Configuration Software is a very professional general configuration software. It has full Chinese visualization effects, supports progressive color adjustment, rotation animation effects, and supports temperature control curves and many other industrial control curves, compatible with a full range of Kunlun hardware products, which can save users a lot of time.