Introduction: Thru-beam photoelectric sensor M100/MV100-RT/76a/95/103 miniature design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, clearly visible LEDs, for indicating power-on and switching status, insensitive to ambient light.
Features:
Effective detection distance :0 ... 10 m
Detection range limit: 15 m
Light source: LED
Light Type: Modulates visible red light
Spot diameter : approx. 1 m apart and 15 m apart
Divergence angle : approx. 2 °
Optical end face: direct forward beam
Ambient light limit: EN 60947-5-2
MTTFd ：860 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
Working Indicator: Green LED: Power on
Function Indicator: Receiver: Yellow LED, lights up when the beam is unobstructed, flashes when the stability control is insufficient; Turn off when the beam is interrupted
Control element: Sensitivity adjustment
Control element: Turn on when it's on/turn on when it's dark
Operating voltage :10 ... 30 V DC
Ripple : 10 % max.
No-load current
Emitter: ≤ 15 mA
Receiver: ≤ 8 mA
Test Input: Transmitter deactivates under +UB
Switch Type: The switch type of this sensor is changeable. The default setting is: Switch on when on
Signal output: 1 PNP output, short circuit protection, reverse polarity protection, open collector
Switching voltage: max. 30 V DC
Switching current: max. 100 mA, impedance load
Voltage drop : ≤ 1,5 V DC
Switching frequency: 1000 Hz
Response time: 0,5 ms
Product standard: EN 60947-5-2
Ambient temperature :-30 ... 60 °C （-22 … 140 °F）
Storage temperature :-40 ... 70 °C （-40 … 158 °F）
Housing width: 11 mm
Housing height: 31 mm
Housing depth: 20 mm
Degree of protection: IP67
Connection: M8 x 1 connector, 4-pin
Housing :P C (Polycarbonate)
Optical end-faces :P UMA
Mass: approx. 20 g (transmitter and receiver)
Tightening torque of the tightening screw: 0,6 Nm
This article introduces P+F/Double Fern Photoelectric Sensor M100/MV100-RT/76a/95/103 products, if you are interested in P+F/Double Fern Photoelectric Sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/2D Laser Scanner R2000 5-pin M12x1 connector
Product Introduction: The R2000 series combines standard sensors with the latest measurement methods. The R2000 2D laser scanner (also known as 2D LiDAR sensor) is equipped with the innovative Pulse Ranging Technology (PRT) to deliver reliable and extremely precise measurement results with 360° gap-free ...
|
|
P+F/Inductive sensor NBN4-F25K-2E2/2Z4L/E8 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Capacitive sensor CBB8-18GK75-E2-V1 with a diameter of 18 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Logic Control Device 14bit Resolution
Introduction: Logic control units are widely used in the automation industry. In practice, they are capable of detecting digital or analog signals, displaying them and monitoring them. In order to solve the conversion and application between signals, we provide digital display meters, counters ...
|
|
P+F/Capacitive sensor CBN8-F64-E1 8mm non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CCN5-F46A-E1/E3 non-flush 5mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Germany P+F/Bejiafu inductive sensor NBN30-U1K-N0 weight 225g
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/VLD700-F280-2E2-1000 laser diode
Product Introduction: Parameterization of the SmartRunner Detector is very simple. The laser line of the vision sensor is projected onto the desired background and programmed using teach-in. With the Data Matrix control code, the user can set additional parameters such as the detection area without a PC ...
|
|
P+F/Multi-line LED Scanner R2100 4-20mA analog output
Product Introduction: The R2100 Multi-Ray LED Scanner, also known as a 2D LiDAR sensor, combines pulsed ranging technology with ultra-infrared LEDs and multi-beam scanning to further advance the realm of possibilities. Multiple LED emitter elements arranged next to each other provide a two-dimensional surface with eleven points of light ...
|
|
P+F/Through-beam GD18 / GV18 /115/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical surface, 20 meters detection distance, red light, light and dark, DC version, 2 PNP outputs, fixed cable, high efficiency line, short M18 plastic housing application, very high detection range, 4 LED fingers...
|
|
P+F/Gasford accelerometer F99 series measuring range -2~+ 2 g
Introduction: The F99 series of accelerometers is a complex mechanical system that uses accelerometers to ensure accurate real-time monitoring of the machine's vibrations. Accelerometers detect wear and tear on machine components and any critical operating conditions. Thus guaranteeing the execution of corrective actions to avoid potential damages.
|
|
P+F/Inductive sensor NBB8-18GM50-E0-M 8mm
Summary: Inductive proximity sensors are the product of choice for most applications that require the precise and non-contact detection of metal objects in machinery or automation. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality inductors.
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/73c/76a/136
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F/Sensor NBN4-12GM60-A2-V1 4 mm non-flush
Introduction: NBN4-12GM60-A2-V1 standard inductive sensor smooth or threaded stainless steel cylindrical housing; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, ...
|
|
P+F/Capacitive Proximity Sensor CBN15-F64-E2 15mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Triangulation sensor OBT300-R100-2EP-IO-V31-L
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, precise object detection, virtually color-independent, extended temperature range
Our customer-centric service philosophy ...
|
|
P+F inductive sensor NBN4-12GM60-A0 4mm
Introduction: Inductive proximity sensors are the product of choice for most applications that require high-precision, non-contact detection of metal targets in the field of mechanical instrumentation and automation equipment. As a market leader in this category, we offer our customers innovative, high-quality ...
|
|
P+F/Pixel Sensor GL30-RT / 32 / 40A / 98A Light/Dark
Product Introduction: Photocell Sensor, Zinc Die-Cast Housing, 30mm Slot Width, Red Light, Light/Dark, Sensitivity Regulator, DC Version, PNP Output, 3-Pin M8 Plug, Optimized for Detecting Small Parts, High Switching Frequency, Multi-Device Installation Possible, No Mutual Interference (No Crosstalk), Sensitivity ...
|
|
P+F/Retroreflective Area Sensor RLG28-55 / 115B / 136
Product Introduction: Retroreflective area sensor with 6 beams in a widely used standard photoelectric housing, red light, 4 m detection range, switchable bright/dark, push-pull output, M12 plug, reflective area sensor housing with 6 beams in a standard photoelectric sensor, connector and ...
|
|
P+F/Through-beam photoelectric sensor BB10-P/59/76b/103/115e
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
Contact
working hours
