Introduction: Some ultra-small photoelectric sensors cannot meet the specifications of "a little smaller". In order to solve this problem, KEYENCE has achieved such a small size by adopting a "SUS316L Rugged Body" and a "Unique Stability Detection Algorithm". This makes it easier to use ultra-small photoelectric sensors. New proposals for photoelectric sensors are available.
Product parameters
Model | | | | | | | | | | | | | | | | | Control the number of outputs | | | | | When it comes to light ON | | | When it comes to light ON | | | | | | | ON → OFF：2.7ms、OFF → ON：0.5ms | | | | | about2.5x4.5mm (15mm time) | | | 4 The element Point Light is redLED (650nm) | Prevent mutual interference function | | | | Output indicator (Orange), stable action indicator (green), transmissive transmitter: power indicator (green) | | 30 VDC hereinafter50 mA hereinafter
Leakage current:
Load resistance 3 kΩ time 0.3 mA Below, load resistance 1 kΩ time 0.5 mA Below, load resistance 0.2 kΩ time 1.5 mA hereinafter
Residual Voltage:
10 mA In the following cases 1.0 V hereinafter10 reach 30 mA time 1.5 V hereinafter30 reach 50 mA time 2.0 V hereinafter | | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | | 10 reach 30 VDC, including ripple (P-P) 10 % | | | Transmitter:11 mAReceiver:16 mA | | | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | | | | | Incandescent lamp:5,000 lx Below, daylight:20,000 lx hereinafter | | | -25 reach +55 °C (No freezing) | | Store at ambient temperature | | | | 35 reach 85 % RH (No condensation) | | | | | | 10 reach 55 Hz, double amplitude 1.5 mm、X,Y,Z directions 2 Hours | | | 1,000 m/s²、X,Y,Z directions 6 times | | Enclosure:SUS316L, indicator housing/Lens cover: polysulfone, cable cover: polymethylpentene, filling material: polyester series resin | | | |
This article introduces the KEYENCE/KEYENCE photoelectric sensor PR-F series sensitivity N/A products, if you are interested in KEYENCE/KEYENCE photoelectric sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH100(10M)
KEYENCE/KEYENCE LR-XH100 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 100mm) with a cable length of 10m
*1 Classified according to Laser Notice No. 56 in the FDA (CDRH) according to the IEC60825-1 standard.
This article introduces the ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51C3PD
Mini Slim Permeable Type M8 Connector Type 1.2m
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".
Example) PR-M51C3PL ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-055
IX-055 sensor head 55 mm
specification
*1 X: Laser long dimension direction, Y : Laser short dimension direction
*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.
*3 Positive alignment at the reference distance
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11N
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11N Laser Sensor Amplifier Split Amplifier Cable Type Main Unit NPN
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range is set during tuning.
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87621
Connector cable M8 straight type 2m chemical resistant
Type: Connector cable Chemical resistant
End shape: M8 straight - scattered
Length: 2 m
Material: Cable: PVC, Nut: SUS316L
Weight: approx. 75 g
This article introduces the KEYENCE/KEYENCE amplifier built-in CM ...
|
|
The KEYENCE/KEYENCE fiber optic sensor CZ-V1/K1P weighs approximately 115 g
Introduction: The RGB digital fiber optic sensor CZ series can detect objects that cannot be detected by some sensors through 2 color screens and 3 sensing methods.
Product parameters
This article introduces the KEYENCE/KEYENCE Fiber Optic Sensor CZ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100CG (Detection Distance: 100mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type
This article introduces the KEYENCE/KEYENCE laser sensor LR-X series LR-X100CG (detection distance 100mm) products.
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87951
LAN cable (RJ-45-RJ-45) 3 m
Type: LAN cable
Length: 3 m
Weight: approx. 180 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87951 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series
The new Ultra-Small pursues "Ultra-Small × Stable Detection". It can be installed in a variety of places
Green Laser × Mirror structure × Customized CMOS Sensors A new triangulation ranging system that achieves ultra-miniaturization
It can stably detect a wide range of targets, from highly reflective metals to black workpieces
...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100CP
Square Reflective Type M8 Connector Type 100mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on the IE ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB30CP
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Flat BGS Reflective M8 Connector Type 30mm PR-FB30CP
specification
In this article, we introduce the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series PR-FB30CP products, ...
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A5E
Sensor head – extension cable for controller 5m CB-A5E
Length: 5 m
Weight: approx. 400 g
This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A5E products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service ...
|
|
KEYENCE/KEYENCE Communication Unit LK-CC100
Communication unit LK-CC100
specification
This article introduces KEYENCE/KEYENCE communication unit LK-CC100 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you more ...
|
|
KEYENCE/KEYENCE Digital Ultrasonic Sensors FW Series UL Approved
Introduction: KEYENCE/KEYENCE Digital Ultrasonic Sensor FW Series uses a new algorithm A.W.S. (Active Wave Stabilizer) to achieve stable inspection without the influence of workpiece differences and ambient light. At the same time, this product has obtained CE mark certification and UL certification, which can be assured to make ...
|
|
KEYENCE/KEYENCE Optoelectric Sensors with Built-in Amplifiers PR-M/F Series OP-87666
Adjustable bracket mounts metal parts 130mm
Type: Adjustable bracket mount
Applicable products: PR series, PZ series, LR series
Length: 130 mm
Material: SUS304
Remarks: Comes with M3 screw×4, small slim type/plate nut for bracket ×1
Weight: approx. 5 ...
|
|
KEYENCE/KEYENCE Optoelectronic Sensors with Built-in Ultra-Small Amplifiers PR-M/F Series OP-87672
Slit plate φ0.5 mini for ultra-thin
Type: Slender Small, slender and elongated
Number of Builts: 1pcs
Slit plate size: ø0.5
Material: SUS304
Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only
Weight: approx. 1 g
This article introduces ...
|
|
KEYENCE/KEYENCE LR-X50 laser sensor
Introduction: KEYENCE/KEYENCE Laser Sensor LR-X50 Ultra-Compact Laser Sensor 90g 0.5mm
It can be installed in a variety of places:
Although it is a laser sensor, it can be ultra-small × 9.427×17mm. Can be installed in very tight spaces. Can be cut for ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1500
Amplifier unit Panel mount IL-1500
Pollution level: 2
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relative humidity: 35 to 85 % RH (non-condensing)
Shock resistance: 10 to 55 Hz, double amplitude 1.5 mm, 2 each in X, Y, Z ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87408
Standard mounting metal fittings
Type: Standard mounting bracket
Target products: LR-Z series
Material; SUS316L
Note: This is a bracket for cable extraction. When installing connector types, use OP-87409 and OP-87410.
Weight: approx. 30 g
This article introduces KEYENCE/...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87903
Sensor head cable 2 m
Type: Sensor head-to-amplifier cable
Length: 2 m
Weight: approx. 110 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87903 product, if you are interested in KEYENCE/KEYENCE products, please also contact our ...
|
|
Contact
working hours
