KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87408

KEYENCE/KEYENCE LR-XH100 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 100mm) with a cable length of 10m *1 Classified according to Laser Notice No. 56 in the FDA (CDRH) according to the IEC60825-1 standard. This article introduces the ...

Connector cable M12 straight 10m standard Quantity: 1 End Shape: M12 Straight - Scattered Length: 10 m Material: Cable part: PVC, nut part: zinc nickel plating Weight: approx. 430 g This article introduces the KEYENCE/KEYENCE amplifier built-in TOF excitation ...

Sensor Controller Extension specification *1 Displayed in the control panel for IX or in the PC software. *2 Can be set according to the program. *3 When sample hold (edge), peak/valley value/P-P hold (horizontal/edge) is set. *4 Saved in the internal storage of the sensor controller ...

Introduction: KEYENCE's stand-alone photoelectric sensor PZ-V/M series uses a laser sensor with distance principle detection, which is not easily affected by the color and tilt of the workpiece, and performs stable detection. Unaffected by highly reflective target backgrounds, it is highly resistant to dust and dirt. ...

keyence KEYENCE CMOS Laser Displacement Sensor Amplifier Unit DIN Rail Mount Type IL-1050 Power supply voltage: Supplied by the main module*3 Power consumption: 2000 mW or less (67 mA or less at 30 V) Pollution level: 2 Ambient temperature: -10 to +50 °C ( ...

NFPA79 standard Ethernet cable L type 5 m Length: 5 m Note: Used for the connection between sensors, PCs or Ethernet switches. When using the IV Series as a UL certified product, use an NFPA79-capable Ethernet cable. This article introduces the KEYENCE/KEYEN...

Square nut for mini ultra-thin Type: Plate nut for slender length Applicable products: PR-M series Number of Builts: 2 pcs Material: SUS316L Weight: approx. 2 g In this article, we introduce the KEYENCE/KEYENCE OP-876 Series P-M/F Series Photoelectric Sensor with Built-in Ultra-Small Amplifier ...

Securely mount metal parts Material: SUS316L Note: When installing the connector type, it can only be used in combination with L-shaped connector cables. Weight: approx. 170 g In this article, we introduce the KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series OP-87410 ...

Description: Proximity sensor EM series ultra-small sensor head, small size, sensor amplifier in cable, with built-in LED indicator, detection distance up to 8mm. Rugged, flexible cables and IP-67 waterproof housing. ...

Introduction: KEYENCE's new PX series of ultra-strong industrial photoelectric sensors, rugged industrial sensors, are designed for use in demanding environments. The entire body of the PX Series enclosure is filled with transparent epoxy resin under vacuum. This ensures that the cables and lenses are firmly adhered to the body, ...

Controller PNP type LJ-G5001P Key features: Sensor head calculation, contour adjustment, filter, smoothing, averaging, position adjustment, OUT name change, measurement mode selection (Height, Position, Gap, Width, Center Position, Cross-sectional Area, Crossing, Angle, Contour Ratio...)

Square type High power reflective type M8 connector type 500mm specification *1 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The configuration software can be downloaded from the KEYENCE website. If you are using the file in an environment where you cannot download files over the Internet, please contact ...

Introduction: The RGB digital fiber optic sensor CZ series can detect objects that cannot be detected by some sensors through 2 color screens and 3 sensing methods. Product parameters Model: CZ-12 Type: Area Beam Point, ...

Introduction: KEYENCE/KEYENCE Digital Infrared Temperature Sensor FT Series Depending on the application, it is possible to measure the target and the sensor at a certain distance, from small light spots to long-distance use, and various types of sensor heads are available to cope with various installation environments. Features: ...

KEYENCE Laser Sensor LR-X Series Tail Unit (2 units) OP-26751 Type: Tail unit Summary: When adding a sensor amplifier main unit and an expansion unit, clamp the amplifier to fix the tail unit. Applicable products: FS-N10 series and other add-on ...

Mini Slim Permeable Cable Type 1.2m PR-M51N3 specification This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-M51N3 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we ...

LAN cable (RJ-45-RJ-45) 1 m Type: LAN cable Length: 1 m Weight: approx. 60 g This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87950 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, ...

Sensor head wide type LK-H008W specification This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H008W products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our ...

Reflective laser sensors with detection distances of up to 5 meters and installation restrictions. The distance detection principle is not affected by the surface of the object, and can detect a variety of workpieces. Excellent detection capabilities The LR-T series offers a variety of innovative features to detect targets previously thought undetectable. ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type (Detection Distance: 250mm) *1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m. ...