Introduction: KEYENCE/KEYENCE Pressure Sensor GP-M Series Hydraulic Cylinder Pressure Management on Welding Machines to Prevent Molding Defects (Prevent Material Shortage and Cracks); Confirmation of degassing in the mold to prevent material shortages. Application of cleaning agent, cleaning water pressure, to prevent poor cleaning / waste liquid overflow;
Features:
Easy to use: Anyone from any direction ("from above", "from the front", and "from below") can easily read the same results.
Easy to install: The monitor section can be rotated when locked
Easy to choose: Choose from 3 items
Product parameters
Model
| GP-M001
| GP-M010
| GP-M025
| GP-M100
| GP-M250
| GP-M400
| Rated pressure
| -100 to +100kPa
| -0.1 to +1MPa
| -0.1 to +2.5MPa
| 0 to +10MPa
| 0 to +25MPa
| 0 to +40MPa
| The range that can be displayed
| -120.0 to +120.0kPa
| -0.210 to +1.110MPa
| -0.360 to +2.760MPa
| -1.00 to +11.00MPa
| -2.50 to +27.50MPa
| -4 to +44.00MPa
| Zero cutting pressure value
| ±0.5% of F.S.
| Burst pressure
| 1.5MPa
| 15MPa
| 35MPa
| 100MPa
| Display resolution
| 0.1kPa
| 0.001MPa
| 0.01MPa
| Liquid type
| Gases or liquids that do not corrode the parts of the liquid in contact with the liquid
| Does not corrode liquids in the parts that come into contact with the liquid
| Type of pressure
| Gauge pressure
| precision
| ±1.0% or less*1 of F.S
| Repeatability
| ±0.3% or less*2 of F.S
| Temperature characteristics
| F.S. ±0.6%/10°C
| Connection diameter
| G3/4 (Replacement with R Formula 1/8, R Formula 1/4, R Formula 3/8, G Female 1/4, NPT Formula 1/8, and NPT Formula 1/4 adapters.) )
| Box rotation angle
| Up to 330°
| Medium temperature
| -20 to +100 °C (no freezing/condensation)*3
| Supply voltage
| 10-30 VDC, ripple (P-P): 10% max, Class 2 LPS
| Current consumption
| 50 mA or less (32 mA or less at 24 V, 48 mA or less at 12 V.) Load not included) *4
| How it is displayed
| 4 rows of red digital LEDs/ allow the display to be reversed vertically
| Working indicator light
| Working Indicator (Output 1) (Orange), Working Indicator (Output 2) (Orange)
| lag
| In hysteresis mode: variable (the difference between the on-off and disconnect points is the hysteresis)
In windowed mode: fixed (0.5% of F.S.).
| response
| Control the output
| Choose from 3 to 5000 ms
| Analog output
| Above value + 2 ms (90% response)
| output
| Output 1 controls the output
| NPN/PNP open collector (optional), max. 250 mA (max. 30 V)
Residual voltage of the main unit max. 1 V, selectable N.O./N.C.
| Output 2 substitutions
Change the type
| Control the output
| Analog output
| 4-20 mA, maximum load resistance 500 Ω (when voltage is greater than 20 V)*5
| Environmental resistance
| Enclosure protection grade
| IP67
| Pressure resistance
| 400 kPa
| 4 MPa
| 10 MPa
| 30 MPa
| 50 MPa
| Ambient temperature
| -20 to +80 °C (no freezing, no condensation)
| relative humidity
| 35 to 85 % RH (non-condensing)
| Earthquake resistance
| IEC60068-2-6 20G (10 to 2000 Hz, 2 hours each in X, Y, and Z directions)
| Impact resistance
| IEC60068-2-27 50G (3 times each in 11 ms, X, Y, Z directions)
| Material properties
| Soak the part
| Pressure holes: SUSXM7, diaphragm pressure holes: Al2O3 (alumina), O-rings: FKM
| Miscellaneous
| Metal part of the housing: SUS304, SUS303, Plastic part of the housing: PPSU, porosity :P TFE, nickel-plated brass.
| Metal part of the housing: SUS304, SUS303, Plastic part of the housing: PPSU
| Applicable cables
| M12 connector 4-pin
| weight
| Approximately 150 g
| This article introduces the KEYENCE/KEYENCE pressure sensor GP-M series products, if you are interested in KEYENCE/KEYENCE pressure sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-030
Base distance: 30 mm
Measuring distance: 20 to 45 mm
Enclosure rating: IP67
Pollution level: 3
Ambient light: Incandescent lamp: 5,000 lux*5
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relative humidity: 35 to 85 % RH ( ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB30N1
KEYENCE/KEYENCE Square Reflective Type (Background Suppression) Cable Type 30mm PR-FB30N1
specification
This article introduces the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series PR-FB30N1 products.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-G5001 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, I ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87619
Connector cable M8L word 2m resistant
Type: Connector cable Chemical resistant
End Shape: M8 L-Shaped - Loose Wire
Length: 2 m
Material: Cable: PVC, Nut: SUS316L
Weight: approx. 70 g
This article introduces the KEYENCE/KEYENCE amplifier built-in CM ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZH500N NPN Output Cable Exit Type (2m)
Reflective sensor with through-beam stability. It is not affected by the surface color, material, inclination, etc. of the workpiece. 316L stainless steel body shell, protection grade IP68/69K, can be used in various occasions.
Launched high-power type
Reflective type using traditional* light intensity detection ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H020
Sensor head spot type LK-H020
specification
This article introduces KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H020 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZH500C3P
Square type High power reflective type M8 connector type 500mm
specification
*1 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The configuration software can be downloaded from the KEYENCE website.
If you are using the file in an environment where you cannot download files over the Internet, please contact ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50(10M)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 50 mm) with a cable length of 10 m
*1 Classified according to Laser Notice No. 56 in the FDA (CDRH) on the IEC60825-1 basis ...
|
|
LR-T series LR-TB2000C TOF laser sensor with built-in KEYENCE/KEYENCE amplifier
Detection distance: 2m M12 connector cable type Laser classification 2
specification
*1 Can be displayed from 50 to 2200.
*2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.
*3 I/O can be advanced from the following combinations ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51C3PL
KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51C3PL Flat Permeable Type M8 Connector Type 0.6m
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, ending with "L" ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor FS-N Series 16 expansion units
Introduction: Easy setup of the new concept of the FS-N series of digital fiber optic sensors. It only takes one touch to set the sensitivity and reset the display value. The sensor automatically detects if the light has dropped due to dirt and automatically recalibrates to the original display state. The power of the sensor is increased ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-1050
Sensor Controller Extension
specification
*1 Displayed in the control panel for IX or in the PC software.
*2 Can be set according to the program.
*3 When sample hold (edge), peak/valley value/P-P hold (horizontal/edge) is set.
*4 Saved in the internal storage of the sensor controller ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor FS-V30 Series has a response speed of 33μs
Introduction:High-power, ultra-simple, high-reliability FS-V30 digital fiber optic sensor. The high-power beam provides stable detection in demanding environments.
Product parameters
This article introduces the KEYENCE/KEYENCE Fiber Optic Sensor F...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H027
Sensor head wide type laser class 2 LK-H027
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H027 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, we hope ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H152
Sensor head spot type laser class 2 LK-H152
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H152 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H058
Sensor head wide type laser class 3B LK-H058
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H058 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology ...
|
|
KEYENCE/KEYENCE Sensor Head LJ-V7080
Sensor head LJ-V7080 Installation Status: Diffuse reflection
Reference distance: 80 mm
Enclosure rating: IP67 (IEC60529)*7
Ambient light: Incandescent lamp: 10,000 lux*8 max
Ambient temperature: 0 to +45 °C*9
Relative humidity: 85%RH or less (non-condensing...
|
|
KEYENCE/KEYENCE Digital Infrared Temperature Sensor FT Series Range 3000mm
Introduction: KEYENCE/KEYENCE Digital Infrared Temperature Sensor FT Series Depending on the application, it is possible to measure the target and the sensor at a certain distance, from small light spots to long-distance use, and various types of sensor heads are available to cope with various installation environments.
Features:
...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100CN
Square Reflective Type M8 Connector Type 100mm
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on IEC60 ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87445
Control panel power cable (M8 4pin - loose wire) 10 m
Type: Touch panel power cable
End Shape: M8 4pin - Loose wire
Length: 10 m
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87445 product.
|
|