AirTAC solenoid valve (solenoidvalve) is a kind of industrial equipment controlled by solenoid, it is a basic element of automatic control of fluid, belongs to the actuator, not limited to hydraulic, pneumatic. It is used in industrial control systems to regulate the direction, flow, speed and other parameters of the medium. Solenoid valves can be used with different circuits to carry out the expected control, and can ensure the accuracy and flexibility of control. There are many kinds of solenoid valves, and different solenoid valves play a role in different positions of the control system, the most commonly used are one-way valves, safety valves, direction control valves, speed control valves, etc.
Install and use AirTAC solenoid valves.
Before use, check whether the components are damaged during transportation, and then install and use;
When installing, pay attention to whether the direction of gas flow and the type of connection tooth is correct. The medium used must be filtered through a 40 μm filter
Please pay attention to whether the installation conditions meet the technical requirements (e.g. voltage, operating frequency, operating pressure, operating temperature range, etc.). ), and then install and use;
Pay attention to the flow direction of the gas during installation, P is the air inlet, A (B) is the working port, and R (S) is the exhaust port
Try to avoid using it in a vibrating environment, and pay attention to low-temperature antifreeze measures;
When connecting the pipeline, pay attention to the winding of the anti-discharge belt should not exceed the end face of the joint teeth, remove the dust, iron filings and other dirt in the pipe joint, and avoid impurities or foreign matter from entering the valve body;
Please pay attention to dust protection. It is recommended to install a muffler or muffler at the exhaust port. When dismantling, dust jackets should be installed at the inlet and outlet.
When debugging the whole machine, it is recommended to debug it with a manual device first, and then debug it with power.
The choice of AirTAC solenoid valve.
Solenoid valves are selected according to the piping parameters: diameter specification (i.e. DN) and connection mode
Solenoid valves are selected according to the fluid parameters: material and temperature group
Selection of solenoid valves according to pressure parameters: principle and type of construction
|
More on that
|
AirTAC cylinder model classification
AirTAC Cylinder Type:
There are two types of cylinders: reciprocating linear motion and reciprocating oscillation. There are four types of reciprocating linear motion cylinders: single-acting cylinders, double-acting cylinders, membrane cylinders and impact cylinders.
Single-acting cylinder: only one end has a piston rod, and the gas is supplied from the piston-side to generate gas ...
|
|
AirTAC is not afraid of attacking the linear slide market, Shanghai Bank, and Global Transmission
AirTAC - KY (1590) joined the linear slide market this year, but the two transmission system component factories of Shanghai Bank (2049) and Global Transmission (4540) are still there, and they have set double-digit growth targets this year. The intelligent ball screw developed by Shanghai Bank for a long time is expected to be ...
|
|
AirTAC United States participated in the Chicago Automation Exhibition
The biennial Chicago** Automation Show in United States was held at McCormmy Show in Chicago on April 8 and 11, 2019. This exhibition is the largest, highest-level, and most extensive industrial exhibition in North America. This year, the **Automation Exhibition and the **Logistics Exhibition are jointly held, ...
|
|
AirTAC cylinder, knowledge about cylinders
AirTAC cylinder, some common sense about cylinders
Cylinder barrel
The inner diameter of the cylinder barrel represents the size of the cylinder output force. For example, the model meaning of the piston should do a smooth reciprocating slide in the cylinder barrel, and the surface roughness of the inner and outer surface of the cylinder barrel should reach Ra0.8um. SMC, CM2 ...
|
|
SPS Industrial Automation Exhibition in Italy
SPS IPC DRIVES was held from 28 to 30 May 2019 at the Parma** Exhibition Center in Italy. SPS exhibition is mainly committed to providing customers with perfect automation solutions, and has become the world's leading exhibition in the field of electrical automation systems and components. The exhibition ...
|
|
Introduction and maintenance of AirTAC oil-water separator
AirTAC Oil-Water SeparatorWhen compressed air containing a large amount of oil and water solid impurities enters the separator, the AirTAC oil-water separator rotates along its inner wall to produce a centrifugal effect, so that the oil-water precipitates from the steam flow, flows down the wall into the bottom of the oil-water separator, and then is finely filtered by the filter element. ...
|
|
AirTAC has been recognized as a "Pilot Unit for Skill Level Recognition".
On June 19, the Fenghua District Human Resources and Social Security Bureau awarded the "Pilot Unit for Determining the Technical Grade", and Ning Ya was among them.
"Determination of the technical level of the enterprise' is the determination of the technical level of the enterprise, according to the national technical standards or technical evaluation standards for the enterprise.
|
|
Japan AirTAC participated in the 2019 Japan Smart Factory Expo
The annual Japan Smart Factory Japan 2019 was held from June 5 to 7, 2019 at the Japan Tokyo Exhibition Center. The scale of the expo reached a record high, with a total of about 200 exhibitors and a total of 370 booths. This...
|
|
Introduction to AirTAC magnetic switches
The working principle of AirTAC magnetic switches.
To understand how this switch works, you must first understand what this magnetic switch is used for. Take pneumatic cylinders, for example. In terms of cylinders, the main function of the magnetic switch is to check the operation of the cylinder piston. When the magnetic ring of the cylinder moves ...
|
|
Contact
working hours
