Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply

Introduction: Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply, built-in PFC correction function, working frequency 100KHz, working temperature, humidity -10°C~+70°C; 20%~90 %RH non-condensing

Product Picture Show:

   Features:
   Built-in PFC correction function, PF>0.95Protection Characteristics: Short Circuit/Overload/Overvoltage/High Temperature,air cooling,DIN rail TS-35/7.5 or 15 can be installed,With power-on display (light-emitting diode),100% full load burn-in test,Operating frequency 100KHz,One-year shelf life,Size:227*125.2*100mm(W*H*D)

   Product Model Introduction:

Model		HDRP-480-24	HDRP-480-48
output	DC output voltage	24V	48V
	Output voltage tolerance	±1%	±1%
	Rated output current	20A	10A
	Output current range	0-20A	0-10A
	Output power	480W	480W
	Ripple and noise	120mVp-p	120mVp-p
	DC voltage adjustable range	24~28V	48~53V
	Start-up, rise time	1200ms, 40ms/220VAC full load
	Hold time	16ms/230VAC full load
input	Input voltage range	180~264VAC, 47~63 Hz or 250~370VDC
	AC input current	4A/230VAC
	Power factor	0.7
	efficiency	89%
	Inrush current	Cold start 40A/230VAC
	Leakage current	<3.5mA/240VAC
Protection characteristics	Overload protection	105%~150% of rated output power
		Protection mode: constant current limit, automatic recovery after the load abnormal condition is removed
	Overvoltage protection	30~36V	54~60V
		Protected mode: Turn off the output voltage and resume after restarting
	Over-temperature protection	100°C±5°C (TSW1) heat sink for detecting power transistors
		Protection mode: Turn off the output voltage, and automatically recover when the temperature returns to normal
environment	Operating temperature, humidity	-10℃～+70℃； 20%~90 %RH non-condensing (please refer to load derating curve)
	Store at temperature and humidity	-20℃～+85℃；10%～95 %RH
	Earthquake resistance	10~500Hz, 2G 10min./1 cycle, 60 minutes each in X, Y, and Z axes; Installation: Complies with IEC60068-2-6
safe	Pressure resistance	Input and output room: 3KVAC Input and ground: 1.5KVAC Output and ground: 0.5KVAC
	Insulation resistance	Input/output room, input and ground, output and ground: 100M Ohms / 500VDC
Meets standards	Safety standards	UL508, UL60950-1, TUV EN60950-1 compliant
	EMC standards	EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2(EN50082-2)
other	weight	2.4kg
	wrap	6pcs/15kg/1.75 cubic meters
remark	1. All parameters are measured at 230VAC input, rated load and 25°C unless otherwise specified. 2. Ripple and noise voltages are measured at a 20MHz bandwidth oscilloscope with 12-inch twisted pair ends plus 0.1μ and 47μ capacitors. 3. Tolerance is the sum of voltage setting error, voltage regulation, and current regulation. 4. This power supply is considered to be installed as a device on the final device, which must reconfirm its EMC specifications. 5. The specific output current is shown in the output derating curve.

Shape and installation dimensions:

Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply

The above is the product Meanwell/Meanwell-HDRP-480 single group output rail type industrial power supply, mainly to understand the main features, models, and installation dimensions of the product. We uphold the integrity of life, sincere service attitude, if you are interested in Yaskawa servo drive, please also contact our sales staff, we look forward to your call, hope our technology and service to bring you a good experience.

Our aim: to survive by quality, to develop by reputation, to serve eternity, to give us a chance, but also to give you a surprise.

Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply

Sections viewed

Contact

working hours