HDR-120 Introduction: Start-up, Rise Time 500ms, 70ms/230VAC Full Load 500ms, 70ms/115VAC Full Load, Holding Time 36ms/230VAC32ms/115VAC Full Load, DIN Standard Rail TS-35/7.5 or 15 can be installed. Features: Applicable AC input power supply worldwide, protection features: short circuit/overload/overvoltage, air cooling, with power on display (LED ) 100% full load burn-in test, working frequency 55KHz.
Protection characteristics | | | Protection mode: Constant current limit is automatically restored | | | Protection mode: cut off the output and restart | High temperature protection | | | | Protection mode: cut off the output, automatically recover when the temperature drops | | Operating temperature, humidity | | Store at temperature and humidity | | | 10~500Hz, 2G 10min./1 cycle, duration 60 minutes, each axis | | | Input and output room: 3KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC | | Input/output room, input and ground, output and ground: 100M Ohms/500VDC | | | UL508, UL60950-1, TUV EN60950-1 compliant | | 符合EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2(EN50082-2) | | | | | | | 1. All parameters are measured at 230VAC input, rated load and 25°C unless otherwise specified. 2. Ripple and noise voltages are measured with 0.1μ and 47μ capacitors at the end of a 20MHz bandwidth oscilloscope with a 12-inch twisted pair. 3. Tolerance is the sum of voltage setting error, voltage regulation, and current regulation. 4. This power supply is considered to be installed as a device on the final equipment, and the equipment must reconfirm its EMC index. |
 |
More on that
|
Taiwan Meanwell/Meanwell DIN rail type power supply HDR-60-48 rated current 1.25A
Introduction: Taiwan Meanwell/Meanwell DIN rail type power supply HDR-60-48, HDR-60 is an economical ultra-thin type 60W DIN rail type power supply in line with Germany industrial standards, suitable for installation on TS-35/7.5 or TS-35/15 rails, in the allow space saving cabinet body is designed to 52. ...
|
|
Meanwell-HDR-75 DIN rail switching power supply
Introduction: Meanwell/Meanwell-HDR-75 DIN rail switching power supply, DIN standard rail TS-35/7.5 or 15 can be installed, working frequency 50KHz, weight 0.6Kg, impulse current: cold start current 20A/115V 40A/230V
Product Picture Show:
Product Features ...
|
|
MEAN WELL/Meanwell_HDR-45 DIN Rail Power Supply_DIN Standard Rail TS-35/7.5 or 15 can be installed
HDR-45 Introduction: Meanwell/Meanwell DIN rail switching power supply, can be installed with DIN standard rail TS-35/7.5 or 15, with boot display (LED emitting led), 100% full load burn-in test, working frequency 100KHz. Features: Worldwide AC input power supply. Protection Characteristics: Short Circuit/...
|
|
Meanwell/Meanwell-HDRP-240 single-group output rail type industrial power supply
Introduction: Meanwell/Meanwell-HDRP-240 single output rail type industrial power supply, built-in PFC correction function, PF>0.95, working frequency 100KHz, overvoltage protection, 30~36V
Product image display
Features:
Worldwide AC input ...
|
|
MEAN WELL/Meanwell_HDR-30 DIN rail switching power supply
HDR-30 Introduction: MeanwellHDR-30 DIN Rail Switching Power Supply, with Power on Display (LED Flash), DIN Standard Rail TS-35/7.5 or 15 can be installed, Insulation Class II. Features: Worldwide AC input power supply. Protection characteristics: short circuit/overload/overvoltage
...
|
|
Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply
Introduction: Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply, built-in PFC correction function, working frequency 100KHz, working temperature, humidity -10°C~+70°C; 20%~90 %RH non-condensing
Product Picture Show:
Features:
...
|
|
MEAN WELL/Meanwell_HPS-65 single output switching power supply_100% full load burn-in test
HPS-65 Introduction: AC input current 1.2A/115VAC0.72A/230VAC, impulse current, cold start current 20A/115VAC40A/230VAC, working frequency 65KHz, features: global AC input power supply, protection features: short circuit/overload/overvoltage, air cooling, low leakage current ...
|
|
MEAN WELL/Meanwell_HDR-60 DIN Rail Switching Power Supply_Leakage Current<1mA/240VAC
HDR-60 Introduction: Can be installed with DIN standard rail TS-35/7.5 or 15, with power on display (LED emitting diode), air cooling, insulation class II., 100% full load burn-in test, features: AC input power supply for worldwide, protection characteristics: short circuit/overload/overvoltage.
...
|
|
Meanwell Power RSP-2400-12 has a rated power of 2000.4W
Introduction: Meanwell/Meanwell Power RSP-2400-12, RSP-2400 is a 2.4KW single output enclosure type AC transformer-DC power supply.
Features:
AC input range 180-264VAC
Built-in active PFC function,
Efficiency up to 91.5%
...
|
|
Contact
working hours
