MEAN WELL/Meanwell_HDR-45 DIN Rail Power Supply_DIN Standard Rail TS-35/7.5 or 15 can be installed

HDR-45 Introduction: Meanwell/Meanwell DIN rail switching power supply, can be installed with DIN standard rail TS-35/7.5 or 15, with boot display (LED emitting led), 100% full load burn-in test, working frequency 100KHz. Features: Worldwide AC input power supply. Protection characteristics: short circuit/overload/overvoltage

MEAN WELL/Meanwell_HDR-45 DIN Rail Power Supply_DIN Standard Rail TS-35/7.5 or 15 can be installed

Model		HDR-45-5	HDR-45-12	HDR-45-15	HDR-45-24
lose go out	DC output voltage	5V	12V	15V	24V
	Output voltage tolerance	±2%	±1%	±1%	±1%
	Rated output current	5A	3.5A	2.8A	2A
	Output current range	0-5A	0-3.5A	0-2.8A	0-2A
	Output power	25W	42W	42W	48W
	Ripple and noise	100mVp-p	200mVp-p	240mVp-p	480mVp-p
	DC voltage adjustable range	4.75-5.5V	10.8-13.2V	13.5-16.5V	21.6-26.4V
	Start, rise, hold time	800ms, 60ms, 100ms/230VAC full load
lose enter	Input voltage range	85～264 VAC47～63 Hz； Select 120~370VDC
	AC input current	1.5 A/115 V 0.75A/ 230 V
	efficiency	72%	77%	77%	80%
	Inrush current	Cold start current: 28A/115V, 56A/230V
	Leakage current	＜1mA/240VAC
protect Protector sex	Overload protection	105%～150%
		Protection mode: Constant current limit is automatically restored
	Overvoltage protection	115%～135%
		Protection mode: cut off the output and restart
	High temperature protection	When the power tube reaches 135°C, the output is cut off, and the temperature drops and automatically recovers
environment	Operating temperature, humidity	-10℃～+50℃；20%～90 %RH
	Store at temperature and humidity	-20℃～+85℃；10%～95 %RH
	Earthquake resistance	10~500Hz, 2G 10min./1 cycle, duration 60 minutes, each axis
safe	Pressure resistance	Input and output room: 3KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC
	Insulation resistance	Input/output room, input and ground, output and ground: 100M Ohms/500VDC
symbol Compliance permit	Safety standards	Complies with UL508, TUV EN60950-1
	EMC standards	符合EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2
other	weight	0.31Kg
	wrap	48pcs/16.1Kg/1.3CUFT
remark	1. All parameters are measured at 230VAC input, rated load and 25°C unless otherwise specified. 2. Ripple and noise voltages are measured with 0.1μ and 47μ capacitors at the end of a 20MHz bandwidth oscilloscope with a 12-inch twisted pair. 3. Tolerance is the sum of voltage setting error, voltage regulation, and current regulation. 4. This power supply is considered to be installed as a device on the final equipment, and the equipment must reconfirm its EMC index.

The above is the Taiwan brand Meanwell / Meanwell model HDR-45 rail switching power supply products, the product can be installed DIN standard rail TS-35/7.5 or 15, with power on display (LED light-emitting diode), 100% full load burn-in test, working frequency 100KHz. Our company adheres to the needs of customers, which is our pursuit, and the pursuit of quality is our responsibility. You can rest assured that you can inquire and purchase, if it meets your needs, please come to consult.

MEAN WELL/Meanwell_HDR-45 DIN Rail Power Supply_DIN Standard Rail TS-35/7.5 or 15 can be installed

Sections viewed

Contact

working hours