Meanwell-HDR-75 DIN rail switching power supply

Introduction: Meanwell/Meanwell-HDR-75 DIN Rail Switching Power Supply, DIN standard rail TS-35/7.5 or 15 can be installed, working frequency 50KHz, weight 0.6Kg,Inrush current: cold start current 20A/115V 40A/230V

Product image display：

   Features:
   Worldwide AC input power supply,Protection Characteristics: Short Circuit/Overload/Overvoltage,air cooling,DIN standard rail TS-35/7.5 or 15 can be installed,With power-on display (light-emitting diode),100% full load burn-in test,Working frequency: 50KHz,One-year shelf life,Size:55.5*125.2*100mm (W*H*D)

       Model introduction

Model		HDR-75-12	HDR-75-24	HDR-75-48
output	DC output voltage	12V	24V	48V
	Output voltage tolerance	±2%	±1%	±1%
	Rated output current	6.3A	3.2A	1.6A
	Output current range	0-6.3A	0-3.2A	0-1.6A
	Output power	76W	76.8W	76.8W
	Ripple and noise	100mVp-p	150mVp-p	240mVp-p
	DC voltage adjustable range	17%	17%	10%
	Start-up, rise time	1000ms, 60ms/230VAC full load, 1800ms, 60ms/115VAC full load
	Hold time	60ms/230VAC12ms/115VAC full load
input	Input voltage range	85~264 VAC selectable 47~63 Hz; 120～370VDC
	AC input current	1.6 A/115 V 0.96A/ 230 V
	efficiency	76%	80%	81%
	Inrush current	Cold start current: 20A/115V, 40A/230V
	Leakage current	＜1mA/240VAC
Protection characteristics	Overload protection	105%～150%
		Protection mode: Constant current limit is automatically restored
	Overvoltage protection	120%~140%
		Protection mode: Hiccup mode, automatic recovery
	High temperature protection	TSW1≥85°C±5°C,
		Protection mode: cut off the output, automatically recover when the temperature drops
environment	Operating temperature, humidity	-10℃～+60℃；20%～90 %RH
	Store at temperature and humidity	-20℃～+85℃；10%～95 %RH
	Earthquake resistance	10~500Hz, 2G 10min./1 cycle, duration 60 minutes, each axis
safe	Pressure resistance	Input and output room: 3KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC
	Insulation resistance	Input/output room, input and ground, output and ground: 100M Ohms/500VDC
Meets standards	Safety standards	Complies with UL508, TUV EN60950-1
	EMC standards	EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2
other	weight	0.6Kg
	wrap	20pcs/13Kg/1.1CUFT
remark	1. All parameters are measured at 230VAC input, rated load and 25°C unless otherwise specified. 2. Ripple and noise voltages are measured with 0.1μ and 47μ capacitors at the end of a 20MHz bandwidth oscilloscope with a 12-inch twisted pair. 3. Tolerance is the sum of voltage setting error, voltage regulation, and current regulation. 4. This power supply is considered to be installed as a device on the final equipment, and the equipment must reconfirm its EMC index.

The above is the introduction of the product Meanwell/Meanwell-HDR-75, mainly to understand the performance characteristics, models, and installation dimensions of the product. We adhere to the attitude of honesty and sincerity, if you are interested in Yaskawa servo drive, please also contact our sales staff, we look forward to your call, hope our technology and service to bring you a good experience.

Our aim: to survive by quality, to develop by reputation, to serve eternity, to give us a chance, but also to give you a surprise.

Meanwell-HDR-75 DIN rail switching power supply

Sections viewed

Contact

working hours