HDR-60 Introduction: Can be installed with DIN standard rail TS-35/7.5 or 15, with power on display (LED emitting diode), air cooling, insulation class II., 100% full load burn-in test, features: AC input power supply for worldwide, protection characteristics: short circuit/overload/overvoltage.
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DC voltage adjustable range | | | | | | 100ms, 30ms/230VAC full load, 200ms, 30ms/115VAC full load | | 100ms/230VAC23ms/115VAC full load | | | 88～264 VAC47～63 Hz； Choose 124~370VDC | | | | | | | | | Cold start current: 20A/115V, 40A/230V | | | Protection Characteristics | | | Protection mode: Constant current limit is automatically restored | | | Protection mode: cut off the output and restart | | Operating temperature, humidity | | Store at temperature and humidity | | | 10~500Hz, 2G 10min./1 cycle, duration 60 minutes, each axis | | | | | Input/output room: 100M Ohms/500VDC | | | Complies with UL60950-1, TUV EN60950-1, EN50178 | | 符合EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2，EN61204-3 | | | | | | | 1. All parameters are measured at 230VAC input, rated load and 25°C unless otherwise specified. 2. Ripple and noise voltages are measured with 0.1μ and 47μ capacitors at the end of a 20MHz bandwidth oscilloscope with a 12-inch twisted pair. 3. Tolerance is the sum of voltage setting error, voltage regulation, and current regulation. 4. This power supply is considered to be installed as a device on the final equipment, and the equipment must reconfirm its EMC index. |
The above introduction is Meanwell/MeanwellHDR-60 DIN rail switching power supply, this product can be installed with DIN standard rail TS-35/7.5 or 15, with power on display (LED emitting light), air cooling, insulation class II., 100% full load burn-in test, features: global AC input power supply, protection characteristics: short circuit/overload/overvoltage. Our company adheres to the needs of customers, which is our pursuit, and the pursuit of quality is our responsibility. You can rest assured that you can inquire and purchase, if it meets your needs, please come to consult. |
More on that
|
Meanwell/Meanwell-HDRP-240 single-group output rail type industrial power supply
Introduction: Meanwell/Meanwell-HDRP-240 single output rail type industrial power supply, built-in PFC correction function, PF>0.95, working frequency 100KHz, overvoltage protection, 30~36V
Product image display
Features:
Worldwide AC input ...
|
|
Meanwell Power RSP-2400-12 has a rated power of 2000.4W
Introduction: Meanwell/Meanwell Power RSP-2400-12, RSP-2400 is a 2.4KW single output enclosure type AC transformer-DC power supply.
Features:
AC input range 180-264VAC
Built-in active PFC function,
Efficiency up to 91.5%
...
|
|
MEAN WELL/Meanwell_HDR-30 DIN rail switching power supply
HDR-30 Introduction: MeanwellHDR-30 DIN Rail Switching Power Supply, with Power on Display (LED Flash), DIN Standard Rail TS-35/7.5 or 15 can be installed, Insulation Class II. Features: Worldwide AC input power supply. Protection characteristics: short circuit/overload/overvoltage
...
|
|
Meanwell-HDR-75 DIN rail switching power supply
Introduction: Meanwell/Meanwell-HDR-75 DIN rail switching power supply, DIN standard rail TS-35/7.5 or 15 can be installed, working frequency 50KHz, weight 0.6Kg, impulse current: cold start current 20A/115V 40A/230V
Product Picture Show:
Product Features ...
|
|
MEAN WELL/Meanwell_HDR-45 DIN Rail Power Supply_DIN Standard Rail TS-35/7.5 or 15 can be installed
HDR-45 Introduction: Meanwell/Meanwell DIN rail switching power supply, can be installed with DIN standard rail TS-35/7.5 or 15, with boot display (LED emitting led), 100% full load burn-in test, working frequency 100KHz. Features: Worldwide AC input power supply. Protection Characteristics: Short Circuit/...
|
|
HDR-120 DIN Rail Switching Power Supply
HDR-120 Introduction: Start-up, Rise Time 500ms, 70ms/230VAC Full Load 500ms, 70ms/115VAC Full Load, Holding Time 36ms/230VAC32ms/115VAC Full Load, DIN Standard Rail TS-35/7.5 or 15 can be installed. Features: Worldwide applicable AC input power supply, protection characteristics: short ...
|
|
Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply
Introduction: Meanwell/Meanwell-HDRP-480 single-group output rail type industrial power supply, built-in PFC correction function, working frequency 100KHz, working temperature, humidity -10°C~+70°C; 20%~90 %RH non-condensing
Product Picture Show:
Features:
...
|
|
Taiwan Meanwell/Meanwell DIN rail type power supply HDR-60-48 rated current 1.25A
Introduction: Taiwan Meanwell/Meanwell DIN rail type power supply HDR-60-48, HDR-60 is an economical ultra-thin type 60W DIN rail type power supply in line with Germany industrial standards, suitable for installation on TS-35/7.5 or TS-35/15 rails, in the allow space saving cabinet body is designed to 52. ...
|
|
MEAN WELL/Meanwell_HPS-65 single output switching power supply_100% full load burn-in test
HPS-65 Introduction: AC input current 1.2A/115VAC0.72A/230VAC, impulse current, cold start current 20A/115VAC40A/230VAC, working frequency 65KHz, features: global AC input power supply, protection features: short circuit/overload/overvoltage, air cooling, low leakage current ...
|
|
Contact
working hours
