1. A short sound, the memory refresh failed. The memory damage is serious, and I am afraid that the memory will have to be replaced. 2. Two short sounds, memory parity error. You can go to the CMOS settings and turn off the Parity option of the memory, that is, set it to Disabled. In general, though, ...

1. First of all, restart the computer 2. After booting up, press DEL to enter the BIOS interface 3. Use the up, down, left and right keys on the keyboard to select Power Management, and then select Restore AC Power Loss below.

1. Installation steps and methods of embedded industrial all-in-one machine 1. First put the fuselage of the industrial all-in-one machine flat in a stable place, and accurately embed the base into the fuselage. 2. Put on the screws, screw the screws into each eyelet, and confirm whether they are tightened. 3. Clean embedded industrial integration ...

1. Modular design customization. In different industrial scenarios, the functional requirements of industrial tablet PCs are also different. At present, most of the industrial tablet PCs are production line products, and it is difficult to fully consider the on-site use environment of the products. Therefore, in order to better enhance the user experience and meet the needs of customers...

Hard disk failure: The hard disk may have failed, causing the hard disk light to not light up. You can try restarting the computer, if it still doesn't light up, you can check whether the hard drive is recognized by the computer or try to replace the hard drive. Poor hard disk connection: The hard disk light is not lit, it may also be caused by the poor hard disk connection.

1. Turn on the power supply fan and stop rotating after a few times, the power indicator is fleeting or turns on and off, measure the power output with a multimeter and find that the power supply is not output. The power supply has the protection function of overload or light load, when overloaded, the power supply will automatically cut off the output, when the light load ...

1. Select Power Management Setup and then Power Again, which determines the state of the system power supply when the power supply is restored after an unexpected power outage at power-on. The setting values are: Power Off (Keep the system in the shutdown state ...

Take Advantech IPC 610L as an example of how to install win7 system To install the image win7, you need to make the following preparations: (1) Make a USB flash drive boot disk first; (2) Download a win7 system image file, and then copy it to the USB flash drive boot disk; Step 1: Combine the production of ...

1. Advantech's industrial control computer does not respond when it is turned on, the indicator light of the industrial control motherboard does not light up, and the fan blade of the switching power supply does not rotate 1. Check whether there is any problem with the power supply of the industrial computer. 2. If the communication type is normal, it should be considered whether the power supply of the industrial computer is a common fault. At this time, the ATX ...

1. Physically damaged parts After turning off the IPC, the motherboard can be physically inspected. Often, overheating, material defects, and planned aging can cause capacitors to leak or swell. If you see a capacitor that you want to burn, there may be a problem with the motherboard. 2. Unusual ...

1. Check the power connection: Make sure the power cord is properly connected to the power outlet and the power switch is on. Check the power cord for loose or damaged conditions. 2. Check the monitor connection: Make sure the monitor is properly connected to the computer's display interface (such as VGA, HDMI, D...).

1. First of all, turn off the power. 2. Remove the monitor plug, network cable plug, keyboard and mouse plug and printer signal cable plug. 3. Open the cover of the industrial computer. 4. Remove the bead, the strip is mainly used to fix the ALL-in-One CPU card, and at the same time, it can be used on the ...

1. Insert the boot disk. 2. Reboot the computer, press and hold the Delete key when starting, enter the Bios.3, enter the Advanced bios Features item. 3. Go to the Advanced BIOS Features item 4. Move the cursor to the First boot device...

Advantech recently launched the new industrial-grade PCIe 4.0 "SQFlash 730 Series", which uses a high-performance main control IC chip and supports the NVMe 1.4 protocol, providing an industrial-grade wide temperature solution that can be widely used in harsh environments. The SQFlash 730 series is industrial-grade stable and reliable.

What is an Industrial Motherboard? An industrial control motherboard is a motherboard used in industrial applications. They are used by industrial computers. They can adapt to a wide range of temperature environments, can adapt to harsh environments, and can withstand high loads for long periods of time. According to the structure and size of the industrial control motherboard, it can be ...

With the growing demand for industrial tablet PCs from various businesses, more and more industrial tablet PCs are emerging in the market. When it comes to choosing an industrial tablet, it's becoming more and more difficult for customers. So what kind of industrial tablet PC is high-quality? How to choose the right industrial tablet? Choose...

Daily maintenance of industrial computer: 1. Chassis The chassis includes an industrial power supply, a passive baseplate, and a fan. Industrial control power supply: it is for N hours of uninterrupted boot service, so its performance is better, the main attention is to minimize the entry of dust, to prevent dust from affecting the wind...

IPC-510 4U rackmount chassis/front USB/PS/2 power supply IPC-610 Series 4U high 14-slot rack-mount chassis with ATX motherboard option IPC-622 6U 20-slot rackmount chassis supports 4 systems and redundant power supply.

Take Advantech IPC 610L as an example of how to install win7 system To install the image win7, you need to make the following preparations: (1) Make a USB flash drive boot disk first; (2) Download a win7 system image file, and then copy it to the USB flash drive boot disk; Step 1: Combine the production of ...

Some professional scenarios in medical institutions, such as laboratories, 3D modeling, robotic surgery, surgical navigation, etc., will involve high-end graphics processing, image analysis and other functions, which puts forward very high requirements for the computing performance of computers. In order to obtain higher computing performance, many medical ...

1. First of all, you have to connect the monitor, keyboard, and mouse on the back of the industrial computer. Light up the screen, see the system interface, turn off the industrial control first, and then make sure to do the above steps before doing the next step. 2. Then the next step will be to enter the BIOS. 3. Then turn on again, ...