Kinco KS series PLC KS121 4 high-speed pulse output

Product Introduction

Kinco KS series PLC is a small integrated PLC, which is a high-performance thin sheet product launched by Buke Company.

Under the premise of continuing the K5/K2 series with rich functions, high performance and high reliability, KS series PLC adopts a CPU with higher performance, and provides a CAN bus interface with the body, high-performance high-speed input/output, compact installation, rich expansion modules and other functions closer to user needs, which can meet the needs of users in a variety of applications.

Kinco KS series PLC KS121 4 high-speed pulse output

　　Features:

The K5/K2 series continues to be feature-rich, high-performance, and highly reliable

Adopt a higher performance CPU

It provides a built-in CAN bus interface and high-performance high-speed input/output

Thin sheet compact design with metal body

Significant installation space savings:

The compact design of the thin sheet, with a thickness of less than 25mm, can be installed in very small electrical cabinets

Higher Computing Speed:

Using the new MCU platform, the scanning cycle of 1000 bits instruction is 0.25ms, which can reach the same level of small PLC

The ontology provides a CANopen interface:

The KS105C1 and KS105C2 ontology comes with a CAN interface, supports CANopen master, slave and CAN free protocols, and works with a convenient motion control command library to provide a more cost-effective option for multi-axis applications

4 high-speed pulse counters:

Four high-speed pulse counters are available. The maximum counting frequency is 200K; Each high-speed counter allows a maximum of 32 PV values and supports 32 "CV=PV" interrupts; The high-speed counter supports a variety of modes, and can count single-phase, double-phase (Up/Down), AB phase (1 doubling frequency and 4 frequency octave) and so on; Users can use the [HSC Configuration Wizard] in the programming software to configure it intuitively

4 high-speed pulse outputs:

Provide 4 high-speed pulse outputs, all of which support PTO (pulse burst) and PWM (pulse width modulation) output; Among them, the maximum output frequency of 3 channels can reach 200KHz (the load resistance is not more than 1.5KΩ), and the maximum output frequency of the other channel is 10KHz PFLO_F

Serial communication port:

One RS232 and one RS485 serial communication ports are provided, named PORT0 and PORT1 respectively, with a maximum baud rate of 115.2Kbps. The PORT1 port can be used as a programming port and also supports Modbus RTU master, slave protocol and free communication

The extension module can be used as a Modbus slave:

The RS485 interface of the expansion module can be used as a Modbus slave, providing a more cost-effective solution for more applications

Product parameters