Introduction: E+H/Endershaus Tuning Fork Limit Detection Liquiphant FTL85, Liquiphant FTL85 coated tuning fork limit switch can be used in explosion hazard areas, has passed several international certifications, is used in fail-safe over-over-protection measurement occasions, meets SIL3 functional safety requirements, and is made of enamel, ECTFE and various PFA materials anti-corrosion coating for reliable measurement. The measurement is unaffected by changes in media properties, fluid disturbances, bubbles, foam, vibration and adhesion.
Features:
It can be used in safety systems with functional safety level SIL2/SIL3 in accordance with IEC 61508Ed.2.0/ IEC 61511-1/ISA 84-1/DIN EN ISO 13849
Verification test: The effective interval of the verification test is 12 years, and the entire circuit equipment is tested with one click
Permanent self-monitoring/internal redundancy
4-20 mA interface (according to NAMUR NE 06/NE 43): Easy integration via two-channel switchgear (safety contacts) output and locking function (Nivotester FailSafe FTL825) or direct and safety PLC integration
No calibration required: Quick and cost-effective device opening mode
No mechanical moving parts, no maintenance, no wear and tear, long service life.
The tuning fork can be monitored for damage, corrosion, adhesion and mechanical blockage
Product parameters
Measuring principle
Liquid tuning fork
Features/Applications:
Coated limit switches for use in high and low limit applications up to SIL3,
Double sealing/second protection
Modular housing
peculiarity
Superior performance:
- Uninterrupted online signal monitoring is functionally safe
- Fail-safe design
- High stability of measured values
Power/Communications
Two-wire 4... 20 mA
Ambient temperature
-50...+70 °C
(-58...+160 °F)
Process temperature
–50...+150 °C
(–58...+300 °F)
Process pressure (absolute)/maximum overpressure limit
Vacuum... 40 bar
(580 psi)
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus Tuning Fork Limit Detection Liquiphant FTL85 product, if you are interested in E+H/Endershaus Fork Limit Detection, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Temperature Sensor Protective Sleeve TW13 Insertion depth 4 mm
Introduction: E+H/Endershaus Thermowell TW13, a metal protective sleeve that is an essential component for temperature measuring points in almost all industrial processes, especially in the fine chemical industry. It protects the measuring cell or sensor element from corrosion by the process medium and prevents the temperature sensor from being ...
|
|
E+H/Endershaus Radiometric Synchronizer FHG66
Introduction: E+H/Endershaus Radiometric Synchronizer FHG66, Gamma Synchronizer FHG66 is used to synchronize an unlimited number of Gamma Modulator FHG65 for unhindered measurements with Gamma Pilot FMG60. The gamma modulator FHG65 is used for effective suppression of background and extraneous radiation (e.g. from ...
|
|
E+H Proline Prosonic Flow 93T Error +/-2.0 %
Introduction: The E+H/Endershaus ultrasonic flow meter Proline Prosonic Flow 93T is designed for temporary monitoring and test measurements with bundled sensors, eliminating the need for an external power supply and relying on the battery to do the job independently. Prosonic Flow 93 ...
|
|
E+H/Endershaus Electronic Vibration Limit Detection FTL825
Introduction: E+H/Endershaus Electronic Vibration Limit Detection FTL825, Nivotester FTL825 directly supplies the Liquiphant fail-safe FTL8x tuning fork level switch via a two-core cable, analyzes the Liquiphant current value (4-20 mA independently), and transmits the switching signal back ...
|
|
E+H/Endershaus Electromagnetic Flowmeter Proline Promag 51P Error ± 0.5%
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag 51P is used in a wide variety of industries with the highest demands. Combined with the proven push-button Promag 51 transmitter, the Promag 51P provides highly accurate liquid measurement. Promag 51P is suitable for use in the chemical industry and for high temperatures, ...
|
|
E+H/Endershaus digital free bromine sensor Memosens CCS55D
Description: E+H/Endershaus Digital free bromine sensor Memosens CCS55D, Memosens CCS55D is a low-maintenance digital free bromine sensor. It reliably measures in desalination plants, process water, cooling water, swimming pools and fisheries, and outputs stable measurements ...
|
|
The E+H/Endershaus analogue conductivity sensor Condumax CLS21 is IP65 rated
Introduction: The E+H/Endershaus analogue conductivity sensor Condumax CLS21 is a rugged conductivity sensor for all processes and environments.
Features:
Reliable and precise measurements for low conductivity measurement applications
...
|
|
E+H/Endershaus Vortex Flow Meter Proline Prowirl O 200 Error ± 0.75%
Description: The E+H/Endershaus vortex flow meter Proline Prowirl O 200 is ideal for reliable gas and steam process control under high pressures and harsh conditions. The instruments are installed in both the main and auxiliary process sections for maximum safety. The Prowirl O 200 is a real ...
|
|
E+H/Endershaus sensor Turbimax CUS50D with IP68 degree of protection
Introduction: E+H/Endershaus turbidity and suspended solids concentration sensor Turbimax CUS50D, the Turbimax CUS50D smart sensor is widely used in many industrial wastewater and process applications with attenuation-free measurements. The absorbance principle allows for single-point calibration. Refer to a variety of comprehensive analysis models ...
|
|
E+H/Endershaus Ultrasonic Sludge Interface Sensor Turbimax CUS71D IP68
Description: E+H/Endershaus Ultrasonic sludge interface sensors Turbimax CUS71D, Turbimax CUS71D continuously monitor the separating and transition layers in clarifiers and sedimentation tanks for safe, cost-effective and efficient sedimentation processes.
Features:
Reliable: Sensors ...
|
|
E+H/Endershaus thermocouple thermometer TEC420
Introduction: The E+H/Endershaus thermocouple thermometer TEC420 is a highly modular, rugged thermometer for almost all industry applications.
Features:
Modular design, standard junction box in accordance with DIN EN 50446 and customer-specified immersion lengths, flexible ...
|
|
E+H/Endershaus digital dissolved oxygen sensor Memosens COS81D
Description: E+H/Endershaus Digital dissolved oxygen sensor Memosens COS81D, Memosens COS81D dissolved oxygen sensor is ideal for hygienic applications, such as fermentation processes and inert protection against oxidation processes. COS81D sensor outputs high-precision measurement for a long time.
|
|
E+H/Endershaus Servo Tank Meter Proservo NMS83 Power Supply 85... 264 VAC
Introduction: E+H/Endershaus Servo Tank Meter Proservo NMS83, Proservo NMS83 Smart Tank Meter for high-precision level measurement in metering transfer and inventory control applications, NMi and PTB certified. Meets all requirements for hygienic applications. Meet the requirements of tank farm inventory management and ...
|
|
E+H/Endershaus Electromagnetic Flowmeter Proline Promag 55S Medium temperature 0...+60 °C
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag 55S is designed for use with media such as inhomogeneous, coarse and corrosive fluids. With an industry-optimized lining, the sensors are rugged and suitable for the most challenging environments and metering jobs, such as wastewater treatment, ...
|
|
E+H/Endershaus hydrostatic level measurement Waterpilot FMX21
Introduction: E+H/Endershaus Hydrostatic Level Measurement Waterpilot FMX21, the Waterpilot FMX21 transmitter uses an oil-free capacitive ceramic measuring cell for hydrostatic level measurement in the process and environmental industries. With HART output, the measuring range can be adjusted freely, and the measuring range is automatically ...
|
|
E+H/Endershaus Ultrasonic Level Measuring Instrument FMU30-AAHEAAGGF
Product introduction: The FMU30-AAHEAAGGF all-in-one ultrasonic level measuring instrument is used for non-contact level measurement of liquids, slurries and solids. The sensor emits an ultrasonic pulse signal directly to the surface of the medium. The pulse signal is reflected on the surface of the medium, and the reflected signal is received by the sensor. Ceremony...
|
|
The E+H/Endershaus ultrasonic level sensor FMU90 has a measuring range of 70 m
Product Introduction: For use with FDU91/91F/92/93/95/96 series ultrasonic sensors, with field housing or DIN rail mounting housing Pros Simple menu-guided operation with 6-line plain text display, available in 15 languages Envelope display for quick and easy fault ...
|
|
E+H/Endershaus Guided wave radar measures travel time principle Levelflex FMP51
Introduction: E+H/Endershaus Guided Wave Radar Measuring Stroke Time Principle Levelflex FMP51, Levelflex FMP51 is suitable for level measurement under extreme conditions in the process industry, such as high temperature and high pressure. Even if the liquid level fluctuates, foams or there is an obstacle in the tank...
|
|
E+H/Endershaus digital ORP electrode Memosens C PF82E with a length of 120 mm
Introduction: E+H/Endershaus Digital ORP Sensors The Memosens CPF82E is a robust digital ORP sensor that reliably measures ORP values under harsh conditions. Stain-resistant PTFE diaphragm, low maintenance workload, built-in mounting bracket, easy to install...
|
|
E+H/Endershaus combination electrode Memosens CPS16D with IP68 degree of protection
Introduction: E+H/Endershaus Memosens CPS16D, Memosens CPS16D is an all-rounder pH/ORP combination electrode that performs simultaneous pH and ORP measurements for improved process control and product quality.
Features:
Simultaneous measurement of pH, ORP and rH values (in r...
|
|
Contact
working hours
