Introduction: E+H/Endershaus Servo Tank Meter Proservo NMS81, Proservo NMS81 Smart Tank Meter is designed for high-precision level measurement in metering transfer and inventory control applications, NMi and PTB certified. Meets the relevant requirements of OIML R85 and API 3.1B standards. Meets the stringent requirements of tank farm inventory management and wastage control, and has been optimized for total cost savings and safe operation.
Features:
Hardware and software design according to IEC 61508 with a maximum safety of SIL3 (in homogeneous redundant systems)
The highest measurement accuracy of ±0.4 mm (± 0.02") gives it the highest reliability
Designed in accordance with international metrology laws such as OIML R85 and API MPMS standards
Local and national approvals, e.g. NMi certification or PTB certification in custody transfer applications
The wetted parts are made of 316L material, which is highly corrosion-resistant and suitable for acidic applications such as crude oil
Up to three interface, tank bottom, single-point temperature and density gradient measurements can be performed
Ideal for LNG/LPG applications, independent of dc values or Boil Off Gas
Product parameters
Measuring principle
Servo level gauge/float level gauge
Features/Applications:
Servo level gauge: high-precision measurement of liquid level, interface, single-point density, density gradient
peculiarity
Metrological transfer level measurement
Interface measurements
Single-point density and density gradient measurements
Power/Communications
85…264 VAC
Measurement accuracy
Up to 0.4 mm
Ambient temperature
Standard:
-40…60°C
（40…140°F）
Calibration meets regulatory requirements:
-25…55°C
（-13…131°F）
Process temperature
-200…200 °C
（-328…392 °F）
Process pressure (absolute)/maximum overpressure limit
0.2…25 bar abs
The main wetted parts
316L, AlloyC276 alloy, PTFE
Process connections
Flange:
DN80/3" / DN100/4" / DN150/6"
Maximum measuring distance
47 m （154 ft）
correspondence
Output:
Fieldbus: Modbus RS485, V1, HART
4… 20mA analogue output (Exi/Exd)
Relay Output (Exd)
Input:
4… 20mA Analog Input (Exi/Exd)
Two-wire, three-wire, four-wire RTD input
Digital inputs (Exd, passive/active)
Certificates and certifications
ATEX、FM、IEC Ex
Security certifications
Overfill protection WHG
SIL
Design Certification
EN 10204-3.1
NACE MR0175、MR0103
Metrological Certifications and Certificates
OIML、NMi、PTB
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus Servo Tank Meter Proservo NMS81 product, if you are interested in E+H/Endershaus Servo Tank Meter, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Capacitive level measurement Liquicap FMI52 IEC 61508 standard
Introduction: E+H/Endershaus Capacitive Level Measurement Liquicap FMI52, Liquicap FMI52 is a reliable fully insulated probe for continuous level measurement of liquids, especially in small storage tanks, adhesion forming media and in extreme high temperatures.
|
|
E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU90
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU90, the FDU90 ultrasonic sensor is suitable for continuous, non-contact level measurement of liquids, slurries, sludges, powders and solid lumps, maintenance-free, and can also be used for flow measurement in open channels and measuring weirs ...
|
|
The E+H/Endershaus temperature transmitter iTEMP® TMT182 outputs 4 – 20 mA
Description: The E+H/Endershaus temperature transmitter iTEMP® TMT182 offers excellent reliability, accuracy and long-term stability for critical processes in all industries. Not only can RTD and TC conversion signals be transmitted, but also HA...
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT180
Description: The E+H/Endershaus temperature transmitter iTEMP® TMT180 is designed for signal transmission in RTD Pt100 sensors and can be set with different measurement ranges. 4 ... A standard current output signal of 20 mA is used for process measurements. It can be used in all kinds of non-explosion-proof areas, providing ...
|
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI56
Introduction: E+H/Endershaus Capacitive Limit Detection Solicap FTI56, Solicap FTI56 fully insulated or semi-insulated cable probes are rugged for the detection of fine and coarse solids. With its automatic adhesion compensation, the probe offers the highest measurement yield.
|
|
E+H/Endershaus temperature transmitter iTEMP TMT142B
Description: The E+H/Endershaus temperature transmitter iTEMP TMT142B with backlit display delivers reliable, precise and long-term stable measurement results in harsh conditions and hazardous areas. Built-in Bluetooth® interface for safe remote operation
Features:
...
|
|
E+H/Endershaus Tuning fork level switch Soliphant FTM21
Introduction: E+H/Endershaus Tuning fork level switch Soliphant FTM21, Soliphant FTM21 limit switch is suitable for non-flowing solid fine and coarse material level detection.
Features:
No calibration required: Simple commissioning (plug and play)
Anti-adhesion and maintenance-free
...
|
|
E+H/Endershaus Tablet Field Xpert SMT70 298.5x192x20mm
Description: E+H/Endershaus Tablet Field Xpert SMT70, Tablet Field Xpert SMT70 for equipment configuration and mobile plant asset management in both hazardous and non-hazardous areas. Digital communication to help commissioning and maintenance personnel ...
|
|
E+H/Endershaus temperature transmitter iTEMP TMT128 DIN rail
Introduction: The E+H/Endershaus DIN rail temperature transmitter iTEMP TMT128 is designed to convert thermocouple (TC) sensor signals over a fixed measuring range.
Features:
High-precision measurements over the entire ambient temperature range
Sensor disconnection ...
|
|
E+H/Endershaus High Temperature Thermocouple Thermometer TAF11
Introduction: E+H/Endershaus High-temperature thermocouple thermometer TAF11, the measuring point with extremely high process temperatures requires the thermometer to be equipped with a ceramic sheath tube and thermocouples made of special metals such as platinum and rhodium. The special material sheath protects the working elements in the measuring process against mechanical damage or chemical ...
|
|
E+H Proline Promass A 500/8A5C Pressure 6250psi
Description: The E+H/Endershaus mass flow meter Proline Promass A 500/8A5C is ideal for continuous process control under harsh conditions. The single measuring tube flowmeter with its unique self-emptying function enables high-precision measurement of liquids and gases with very small flow rates.
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT84
Introduction: The E+H/Endershaus temperature transmitter iTEMP® TMT84 offers excellent reliability, accuracy and long-term stability for critical processes in all industries, not only for the transmission of thermoresistive (RTD) and thermocouple (TC) digital conversion signals, but also for the use of PRO ...
|
|
E+H/Endershaus Conductive Point Detection Liquipoint FTW32
Introduction: E+H/Endershaus Conductive Limit Detection Liquipoint FTW32, Liquipoint FTW32 can be used for conductive liquid limit detection, simple and safe measurement. The multi-point detection function (up to 5 measuring rods) enables the Liquipoint FTW32 to have a wider measuring range
Product Features ...
|
|
E+H/Endershaus electromagnetic flowmeter Dosimag is lined with PFA
Introduction: The E+H/Endershaus electromagnetic flowmeter Dosimag is specially designed for the filling and bottling of conductive liquids and can directly measure the volumetric flow rate. Designed for tight application spaces, Dosimag is the product of choice for system integrators, skid builders and equipment manufacturers.
Product Features ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass P 500 Measuring Tube 316L
Description: The E+H/Endershaus mass flow meter Proline Promass P 500 is a specialist in aseptic processes in the life sciences and is specifically designed for biotechnology applications that require the highest compliance. The Promass P 500 is equipped with an innovative split transmitter that maximizes the use of demanding ...
|
|
E+H/Endershaus Tuning Fork Level Meter FTL20-0220 Limit Level Detection Switch
Product introduction: FTL20-0220 is an all-in-one limit detection switch. Typically used in tank farms, vessels and pipelines, in cleaning and filtration systems and cooling and lubrication tanks, for overfill protection or to prevent pumps from running dry.
Tuning fork level meter FTL20-002B
...
|
|
E+H/Endershaus RTD Thermometer TST602
Description: The E+H/Endershaus RTD thermometer TST602 can be installed quickly and easily directly on the wall of a pipe or vessel without the need for a process connection, and can therefore be used in a wide range of applications, such as verifying other measuring devices or measuring temperature temporarily without aborting the process. It is designed to be particularly suitable for building automation ...
|
|
E+H/Endershaus Pressure Transmitter Cerabar PMP71 Measurement accuracy 0.075%
Introduction: E+H/Endershaus Pressure Transmitter Cerabar PMP71, Cerabar PMP71 digital pressure measuring transmitter with metal diaphragm is mainly used in the process industry to measure the pressure, level, volume and mass of liquids and gases. The PMP71 is designed for high-voltage measurement occasions, and the most ...
|
|
E+H/Endershaus Ultrasonic Measurement of Travel Time Principle Prosonic FDU93
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU93, the FDU93 ultrasonic sensor is suitable for continuous, non-contact level measurement of liquids, slurries, sludges, powders and solid lumps, maintenance-free, and can also be used for flow measurement in open channels and measuring weirs ...
|
|
E+H digital dissolved oxygen sensor Memosens COL37E is IP68 rated
Description: E+H/Endershaus digital dissolved oxygen sensor Memosens COL37E, fluorescence dissolved oxygen sensor Memosens COL37E is easy to operate and easy to maintain. Oxygen concentration measurements can be performed quickly with simple adjustments.
Features:
Zero Flow Type C Fluorescent Cap ...
|
|
Contact
working hours
