Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU93 Ultrasonic sensor for continuous, maintenance-free level measurement of liquids, slurries, sludges, powders and solid lumps, also for flow measurement in open channels and measuring weirs.
Features:
Built-in temperature sensor for travel time calibration. Accurate measurements can be made even when the temperature changes
Suitable for use in harsh climatic conditions, the sensor and transmitter can be installed separately with a maximum installation distance of 300m
The sensor is self-cleaning to reduce adhesion formation
Built-in automatic sensor detection, connected to level transmitter FMU90 / FMU95, easy commissioning
IP68 degree of protection
Non-contact measurement minimizes service requirements
Dust-Ex and gas-Ex approvals (ATEX, FM, CSA)
Product parameters
Measuring principle
ultrasonic
Features/Applications:
Separable instruments in field or top hat disc mount housings, suitable for cabinet-mounted instruments with 300 m intervals between sensors and transmitters
Power/Communications
Four-wire (HART, Profibus DP)
Measurement accuracy
+/- 2mm + 0.17% of measuring distance
Ambient temperature
-40…95 °C
（–40…203 °F）
Process temperature
-40…95 °C
（–40…203 °F）
Process pressure (absolute)/maximum overpressure limit
0.7…3 bar abs
（10…43 psi）
The main wetted parts
UP (Unsaturated Resin)
Silicone/Al PTFE coating
Process connections
G / NPT 1"
Blind zone distance
0.6 m （2 ft）
Maximum measuring distance
Liquids: 25 m （85 ft），
Solids: 15 m （50 ft）
correspondence
Transmitters:
4…20 mA HART
Profibus DP
Certificates and certifications
ATEX、FM、CSA、IEC Ex、TIIS、INMETRO、NEPSI
Options
Second way 4... 20mA output
subassembly
Transmitters:
FMU90、FMU95
Apply restrictions
For tank farms scanner:
FMU95
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU93 product, if you are interested in temperature transmitters, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H Proline Promass O 300 0-800000kg/h
Description: The E+H/Endershaus mass flow meter Proline Promass O 300 is designed for high-precision liquid and gas measurement at the highest process pressures in the oil and gas industry, is robust and corrosion-resistant, and is fully compliant with the requirements of offshore/inland applications. The Promass O 300 is equipped with a safe ...
|
|
E+H/Endershaus turbidity sensor OUSTF10
Description: E+H/Endershaus turbidity sensors OUSTF10 OUSTF10 scattered light turbidity sensors are used to measure miscible fluids in suspended solids, emulsions and process liquids.
Features:
Accurate and highly sensitive purity monitoring for better product quality
...
|
|
E+H/Endershaus temperature transmitter iTEMP TMT142B
Description: The E+H/Endershaus temperature transmitter iTEMP TMT142B with backlit display delivers reliable, precise and long-term stable measurement results in harsh conditions and hazardous areas. Built-in Bluetooth® interface for safe remote operation
Features:
...
|
|
E+H/Endershaus Pressure Transmitter Cerabar PMP51B Accuracy 0.075%
Description: E+H/Endershaus The pressure transmitter Cerabar PMP51B is part of the new generation of Cerabar transmitters. The instrumentation offers many advantages, such as convenient on-site or remote operation, as well as on-demand maintenance to prevent unplanned downtime events. ...
|
|
E+H/Endershaus Electronic Vibration Limit Detection FTM20 Ambient temperature -40-70°C
Introduction: E+H/Endershaus Electronic Vibrating Limit Detection FTM20, Soliphant FTM20 Tuning Fork Limit Detection Switch for non-flowing solid fines and coarse materials. The versatile design is versatile and has been certified for dust explosion-proof applications.
Features:
No proofreading required...
|
|
E+H/Endershaus Electromagnetic Flowmeter Proline Promag 51W Pressure PN6... 40
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag 51W is a professional sensor for all applications in the water industry. Combined with the proven push-button Promag 51 transmitter, the Promag 51W provides accurate liquid measurement in a wide range of standard applications. It is the customer's need ...
|
|
E+H/Endershaus analogue total chlorine sensor CCS120
Introduction: E+H/Endershaus Analog Total Chlorine Sensor CCS120, CCS120 Analog Sensor for Standard Measurement of Total Chlorine. Even in the event of flow or conductivity fluctuations, reliable measured values are transmitted, the disinfection loop is controlled, and the water is free of bacteria. At the same time, sensor calibration and ...
|
|
E+H/Endershaus differential pressure transmitter PMD75B Accuracy0.05 %
Introduction: The E+H/Endershaus differential pressure transmitter PMD75B is part of the new generation of Deltabar transmitters. The transmitter is rugged and features a secure Bluetooth connection, allowing you to remotely control the instrument using a mobile device and installing an app. Support for on-demand maintenance, improve the plant...
|
|
E+H/Endershaus Differential Pressure Transmitter Deltabar FMD78 Accuracy 0.075%
Introduction: The E+H/Endershaus differential pressure transmitter Deltabar FMD78 with metal sensor with double capillary diaphragm seal is mainly used for continuous differential pressure measurement of liquids, gases, vapours and dusts in the process and hygiene industries. Built-in HistoROM data module for easy process and ...
|
|
E+H/Endershaus differential pressure transmitter Deltabar FMD77 Range: 100 mbar – 16 bar
Description: E+H/Endershaus differential pressure transmitter Deltabar FMD77 with metal sensor, single flange diaphragm seal, or double flange seal, with capillary tube on the low pressure side. It is mainly used for continuous level measurement in the process industry. Built-in HistoROM data module for convenient processes and equipment ...
|
|
The E+H/Endershaus analogue conductivity sensor Condumax CLS21 is IP65 rated
Introduction: The E+H/Endershaus analogue conductivity sensor Condumax CLS21 is a rugged conductivity sensor for all processes and environments.
Features:
Reliable and precise measurements for low conductivity measurement applications
...
|
|
E+H/Endershaus Gauge Pressure Transmitter Cerabar PMP11 Measurement accuracy 0.5%
Description: The E+H/Endershaus gauge pressure transmitter Cerabar PMP11 is the most economical and compact pressure transmitter. With piezoresistive sensors, the gauge pressure measurement range is 400 mbar. 40bar。 The PMP11 is made of high-quality materials (e.g. 316L) and meets the measurement conditions in the process industry ...
|
|
E+H/Endershaus Differential pressure measurement Deltabar PMD55 max. 160 bar
Introduction: E+H/Endershaus Differential pressure measurement The Deltabar PMD55 pressure transmitter with piezoresistive sensors and welded metal diaphragms is mainly used for differential pressure measurement of liquids, vapors and gases in the process or environmental industries. The measuring range is adjustable, and the fast setting simplifies the commissioning process.
|
|
E+H/Endershaus digital pH electrode Memosens CPS31E
Description: E+H/Endershaus Memosens CPS31E, Memosens CPS31E digital pH sensor, designed for pH compensation measurement in the sterilization process.
Features:
Reliable results: The ceramic diaphragm ensures reliable measurement of low conductivity media. Tested ...
|
|
E+H/Endershaus Temperature Transmitter iTEMP® TMT80 Auxiliary Power Supply 8 – 35VDC
Description: E+H/Endershaus temperature transmitter iTEMP® TMT80, a programmable temperature transmitter for RTD and thermocouple sensors. The linearization characteristics of various sensors are stored in the transmitter to ensure the highest level of measurement accuracy. 4 - 20 mA standard current output signal ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass E 500 Measuring Tube 1.4539
Description: The E+H/Endershaus mass flow meter Proline Promass E 500 is a robust and cost-effective solution for long-term use for high-precision liquid and gas measurements in a wide range of standard applications in different industries. In combination with the innovative split transmitter, ...
|
|
E+H/Endershaus Explosion-proof thermocouple thermometer TC66
Introduction: E+H/Endershaus Explosion-proof thermocouple thermocouple thermometer TC66, this thermocouple thermometer is rugged and suitable for harsh working conditions and high safety requirements in chemical, oil, gas, energy and other industries. Robust protective tubes and special materials are designed to handle harsh work ...
|
|
E+H/Endershaus pressure transmitter PMC131-A11F1A1S High stability
Product introduction: Pressure transmitter PMC131-A11F1A1S economical pressure transmitter with oil-free ceramic sensor to measure gas and liquid pressure. The Cerabar PMC131 is an attractively priced pressure transmitter with an oil-free capacitive ceramic sensor for absolute and gauge pressure measurements.
|
|
E+H/Endershaus digital conductivity sensor Memosens CLS16E with IP68 degree of protection
Description: E+H/Endershaus Digital conductivity sensor Memosens CLS16E, Memosens CLS16E is a high-end conductivity sensor with FDA and USP Cl. VI hygienic approvals and reliable output of high-precision measured values that help to optimize processes and improve product quality.
...
|
|
E+H/Endershaus High Temperature Thermocouple Thermometer TAF16
Introduction: E+H/Endershaus High Temperature Thermocouple Thermometer TAF16, the measuring point with extremely high process temperatures requires the thermometer to be equipped with a ceramic sheath tube and a thermocouple made of special metals such as platinum and rhodium. The special material sheath protects the working elements in the measuring process against mechanical damage or chemical ...
|
|
Contact
working hours
