Japan Rika RKC PZ400/PZ900 Program Controller (Temperature Controller)

Main features

　　The current status is clear at a glance
Japan Rika RKC PZ400/PZ900 Program Controller (Temperature Controller)

The large LCD screen can display a variety of information at the same time, and the operating status can be clearly displayed.

It is clear at a glance whether the program is working correctly or not.

　　Easy to operate (direct button setting)
Japan Rika RKC PZ400/PZ900 Program Controller (Temperature Controller)

Frequently used settings can be set on shortcut keys. It realizes convenient and fast operation, and prevents users from misoperation.

　　The control device is set by the instrument itself
Japan Rika RKC PZ400/PZ900 Program Controller (Temperature Controller)

The program controller is equipped with a number of PID functions. The controller automatically calculates and sets the levels.

Even without a high level of knowledge, the controller automatically completes the initial setting.

　　Easy initial installation Instrument replacement can be done quickly
Japan Rika RKC PZ400/PZ900 Program Controller (Temperature Controller)

All models are equipped with special communication interfaces, which are convenient for on-site operators to maintain and set up.

PROTEM 2 can be used in conjunction with the management of the setting controller and data acquisition.

　　Functions that approximate the upper series can be used for a variety of solutions
Japan Rika RKC PZ400/PZ900 Program Controller (Temperature Controller)

16 segments × 16 models. Up to 256 segments of the program can be implemented with model connections.

Each model can be set with a time signal of up to 4 points. In addition, if logic calculation is used, a maximum of 4 points can be set at DO1 point, which can be used for complex external sequential control.

Main specifications:

Number of input points: 1 point

Input type (general input) *Please refer to the input value range code table

1) Temperature, current, and low voltage inputs

Thermocouples: K, J, R, S, B, E, N, T, W5Re/W26Re, PLII., PR40-20, U, L

Temperature Measuring Resistor: Pt100, JPt100 (3-wire type)

DC voltage (low) :D C0-10mV, DC0-100mV

2) High voltage input class

　　DC0——1V, DC0——5V, DC1——5V, DC0——10V, DC-5——+5V, DC-10——+10V

3) Current input class

　　DC0——20mA, DC4——20mA

Sampling cycle: 0.05 seconds

Measurement accuracy: ± (0.1% of displayed value + 1 digit) *Varies depending on input and range

Program control function

1) Number of model memories: up to 16 models

2) Number of segments: Up to 16 segments ※Up to 256 segments can be achieved by connecting the model

3) Single period: 0 hours 0 minutes to 199 hours 59 minutes or 0 minutes 0 seconds to 199 minutes 59 seconds *There is no time limit

4) Additional Function: Remaining Time Display (Single Stage Remaining Time / Single Model Time Remaining)

Time signal (4 points) DO1-4 (DO2-4 is optional): Please specify the DO allocation

Output 1 (OUT1) * Control, Event, Heater Disconnection Function, Control Loop Disconnection Alarm, Analog Signal Output, etc

1) Relay contact output: 1C contact ※Durable relay

2) SSR voltage pulse output: DC0/12V

4) Current output: DC0-20mA, DC4-20mA

5) Continuous voltage output: DC0-5V, DC1-5V, DC0-10V

6) Transistor output: allowable load current 100 mA

Event/alarm function (4 points): OUT1-3, DO 1-4 can be arbitrarily assigned and set

Analog signal output function (1 point): OUT1-3 can be arbitrarily assigned and set

Dedicated communication function: RS-232C communication mode

< Optional Specifications >

Output 2 (OUT2) * Control, Event, Heater Disconnection Function, Control Loop Disconnection Alarm, Analog Signal Output, etc

1) Relay contact output: FZ100 1a contact ※Durable relay

2) SSR voltage pulse output: DC0/12V

3) Current output: DC0-20mA, DC4-20mA

4) Continuous voltage output: DC0-5V, DC1-5V, DC0-10V

5) Transistor output: allowable load current 100 mA

Output 3 (OUT3) ※ General purpose output

* Control, event, heater disconnection function, control loop disconnection alarm, analog signal output, etc

1) SSR voltage pulse output: DC0/14V

2) Current output: DC0-20mA, DC4-20mA

Digital output (up to 4 points) DO1-4: Relay contact output 1a contact *DO1 is standard

Event inputs (up to 6 points): RUN, RESET, Program Mode Switching, Forward/Reverse Action Switching, HOLD/HOLD Release, STEP, AT ON/OFF, Data Unlock/Lock, Interlock Release, Peak/Valley Release

CT input for heater disconnection alarm: up to 2 points

Opening Feedback Resistance Input (FBR): 100 – 10kΩ (Standard 135Ω)

Communication function: communication mode: RS-485/RS-422A

< general specifications >

Power supply voltage (rated): AC100-240V, AC/DC24V

Ambient temperature: -10-+55°C

Mass: PZ400 about 221g PZ900 about 291g

Safety Specification: UL UL61010-1

　　cUL　CAN/CSA-22.2 NO.61010-1

CE: Low Voltage Directive (LVD) EN61010-1

EMC Directive EN61326-1

　　RCM　EN55011

Japan Rika RKC PZ400/PZ900 Program Controller (Temperature Controller)

Sections viewed

Contact

working hours