Japan RIKA RKC Modular Controller SR Mini HG SYSTEM (H-PCP-J)

Main features

　　It can be connected to each PLC in a program-free way
Japan RIKA RKC Modular Controller SR Mini HG SYSTEM (H-PCP-J)

It can be connected to each PLC without programming.

Compatible PLCs:

Mitsubishi Electric Machinery MELSEC series

Omron SYSMAC series

Sharp JW series

Simultaneous connection of the presenter using the communication interface

　　Compatible with output ratio function (Digital Output Module H-DO-G-D)
Japan RIKA RKC Modular Controller SR Mini HG SYSTEM (H-PCP-J)

The operation output value of the master channel (H-TIO-□) is distributed by multiplying the output ratio (slope) of the slave channel (H-DO-G) by the output scale (slope).

　　Motor Speed Control Empty Energy (Speed Control Module H-SIO-A)
Japan RIKA RKC Modular Controller SR Mini HG SYSTEM (H-PCP-J)

The speed of the motor is controlled by using the pulse of the rotary encoder as the input of the module.

Main specifications:

H-PCP-J module

Basic functions

Data management functions: operating data, system data

Unit diagnosis function: check the function module composition

Digital output

Number of output points: 8 points

Output type: 1st and 2nd temperature alarm (ALM1 and 2), heater disconnection alarm, sensor short-wire alarm,

Select the 1st and 2nd analog transmission input (AI) alarm, the 1st and 2nd temperature input (TI) alarm, loop short-wire alarm, temperature rise end, FAIL, and FAIL

Output mode: open collector output

Communication features

Communication: RS-422A/RS-485/RS-232C

Agreement:

　　1）ANSI X3.28（1976）2.5 B1

　　2）MODBUS

3) PLC (MAPMAN)

※ Connecting to PLC is limited to COM.PORT1,2 1)2)3).

< general specifications >

Power supply voltage (rated): AC100-120V / AC200-240V / DC24V

Ambient temperature: 0-50°C

Mass: Approximately 300g

Safety Specification: UL UL61010-1

　　cUL　CAN/CSA-22.2 NO.61010-1

CE marking Low Voltage Directive (LVD) EN61010-1

EMC Directive EN61326-1

H-DO-G module

Number of output points: 16 points

Output mode: open collector output

Function: Control output of the main channel (TIO module).

Output x limiting function

Output Ratio Function

Control output cycle: 1-100 seconds

H-SIO-A module

Input and loss

Number of input points: 1 point

Input Type:

1) Voltage pulse input, high level voltage DC 7-15V low level voltage DC0-2V

2) Open collector output

Sensor power supply: DC 12V±10%, 70mA or less

Control mode:

1) Open loop control

2) Closed-loop control (automatic calculation with high agility PID control) ※PI control is possible

※Switchable

Control calculation period: 0.1 seconds

Control Output:

1) Voltage output DC0-1V, DC0-5V, DC0-10V, DC1-5V

2) Continuous current output DC0-20mA, DC4-20mA

Alarm function (2 points): input value upper and lower limit alarm, upper and lower deviation alarm, set value alarm, etc

Alarm output (1 point): Relay contact output: 1A contact

External contact input (2 points): Control ON/OFF switching, RUN/STOP switching

Ambient temperature: 0-50°C

Mass: Approximately 120g

Safety Specification: UL UL61010-1

　　cUL　CAN/CSA-22.2 NO.61010-1

CE marking: Low Voltage Directive (LVD) EN61010-1

EMC Directive EN61326-1

Japan RIKA RKC Modular Controller SR Mini HG SYSTEM (H-PCP-J)

Sections viewed

Contact

working hours