Japan Rika RKC SR Mini HG SYSTEM modular controller 0.5 sec (for use type)

Main features

Up to 320 points of temperature control
Japan Rika RKC SR Mini HG SYSTEM modular controller 0.5 sec (for use type)

One power supply/CPU module can be connected to up to 10 functional modules. 1 unit/2 point input calculation, up to 20 points of control.

Through the joint operation communication function, up to 16 systems can be connected to achieve up to 320 points of temperature control.

A variety of functional modules are available for selection
Japan Rika RKC SR Mini HG SYSTEM modular controller 0.5 sec (for use type)

Different functional modules such as temperature control/process control, digital input and output, analog transmission input and output are available.

A temperature control module with a sampling cycle of 0.1 seconds, an accuracy of 0.1% for high-precision models, and a temperature control module that can display 0.01°C is available.

Main specifications:

Power/CPU module

Provide power supply for other functional modules, data management and communication functions with the host computer. One of these modules must be used to use the control module.

Control module

< temperature control module >

The temperature control module can be controlled using two types of inputs, thermocouple and temperature resistor, and can be controlled at either 1 or 2 points.

< high-precision temperature control module >

The measurement accuracy is "0.1%" of the control module. Two types of inputs can be used: thermocouple or temperature resistor. You can choose between 1 or 2 point control. (When the number of control points is 2 points, only the temperature measurement resistance input can be selected for both points, and the accuracy is 0.2%)

< voltage and current input control module >

The DC voltage and current input specifications are high-precision control modules. In addition to a wide variety of inputs and temperature control with a sampling cycle of 0.1 seconds, it is also suitable for a wide range of applications. (When the control point is 2 points, the sampling period is 0.2 seconds)

Analog output output module

< analog input module >

The analog signal input from the production line is used to monitor the production line. It is a high-specification product with an accuracy of 0.1% of full scale and a sampling cycle of 0.1 seconds (2-point input, isolated input) or (4-point input, isolated input). A 2-point alarm is installed as standard. 1

< analog output module >

It is used to output measured or set values in the form of analog signals. It is necessary to record the operation status of the controller in connection with the recorder.

< temperature input module >

This is a module for input thermocouples, temperature measuring resistors, and can be used as temperature monitors. Furthermore, it is equipped with 2 points of alarm as standard. At the same time, it provides a high-precision input module.

Digital/event/contact input module

< array contact input module >

The operating conditions of the control unit can be switched by using external wiring signals such as programmable controllers. Such as switching over the storage area, starting/stopping the operation, etc.

< digital input module (event input) >

Logic input is performed in units of 4 points, and up to 8 kinds of logic results (logic outputs) can be monitored by communication or output from the event output module.

The current detects its input module

A module for a current detector (CT) signal. The heater disconnection alarm function is used in conjunction with the temperature control module. Single-phase/three-phase can be used.

Japan Rika RKC SR Mini HG SYSTEM modular controller 0.5 sec (for use type)

Sections viewed

Contact

working hours