IDEC/Izumi HS1C Solenoid Safety Switch HS1C-L344R-G

VD circuit, key removable in all positions, 3m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric service ...

2 contacts, 2NC lock monitoring circuit, spring lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZSM-G 4 contacts 2NC, 1NO and 1NC, solenoid lock, side wires 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic locks and snap locks are available ...

Lightweight design with excellent grip. The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

VA circuit, unplug the key in the UNLOCK position, key 502,5m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters We...

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005 ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi HS6B Subminiature HS6B-03B05 Safety Interlock Switch 3NC 3NC Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action: ...

64x40x125 mm housing, direct opening action: If the doors are forcibly opened, the contacts will be disconnected even if they are welded or stuck, with or without indicator (red or green), available in 2 contact configurations (1NO/1NC or 2NC ), in accordance with ISO14119 ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

VA circuit, key removal at LOCK position, key 501, 3m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters We start with ...

VD circuit, key removable in all positions, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric service concept: all-round ...

Product Introduction: VA circuit, key removal at unlock position, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric approach ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

VA circuit, key removable in all positions, key 502, 5m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters We take our customers as the ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...