IDEC/Izumi HE6B Enabling Switch HE6B-M200B

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

Three new contact types have been added, and the opening and closing status of the door can be monitored by connecting the auxiliary contact to the PLC Key features: By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. By adapting ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

Small, lightweight, low-cost, high-performance safety switches. Key features: Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs. IP67 (IEC60529) contact ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A12T Right Angle Actuator W Rubber Tape Rubber Right Angle Actuator Product Category Actuators The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

2 contacts 2NC, spring lock, rear unlock button, side conduit 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Mechanical Specifications: Catheter opening M20 Catheter size M20 The main ...

VD circuit, key removal at unlock position, key 502, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric approach ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A15T HS1T Angle Adjustable Actuator Product Category Actuators The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all walks of life ...

IDEC/Izumi Safety Switch HS6E Electromagnetic Safety Switch HS6E-N7Y4B01-G The main features are 75mm×15mm×75mm. The 15mm thick solenoid safety switch is the leading level in the industry. The actuator is installed on both sides of the switch to provide four insertion directions; Diagonally protruding ...

VA circuit, pull out the key in the UNLOCK position, key 502, 3m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Cable length 3 meters Our customer-centric approach ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...