Introduction: E+H/Endershaus Conductive Limit Switch Liquipoint FTW31, Liquipoint FTW31 can be used for conductive liquid limit detection, simple and safe measurement. The multi-point detection function (up to 5 measuring rods) enables the Liquipoint FTW31 to have a wider measuring range.
Features:
One probe can be used for up to five point point detection
Two-point control, upper and lower limit detection
Flexible use:
1. Rod probe with plug-in electronic components, 2 or 3 transistors or relay outputs can be selected;
2. Connect to an independent transmitter power supply unit
No calibration required; It is suitable for the measurement of common conductive liquids
No moving parts: - Long service life - No wear and clogging for reliable operation
Four measuring ranges can be set: 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ
Economical probe for conductive liquids
Product parameters
Measuring principle
Electrical conductivity
Features/Applications:
Compact rod probe with multi-point detection and up to 5 switching points. Convenient truncated rod probe.
Power/Communications
DC PNP：10.8...45V
Relay: 20... 230V AC
Relay: 20... 55V DC
Ambient temperature
-40...70 °C
(-40...158 °F)
Process temperature
-40...100 °C
(-40...212 °F)
Process pressure (absolute)/maximum overpressure limit
Vacuum... 10 bar
(Vacuum...) 145 psi)
The minimum conductivity of the medium
10 µS/cm
The main wetted parts
316L、PP、PPS
Maximum tensile strength
1000 N
Process connections
G 1 1/2
NPT1 1/2"
Sensor length
0.1...4m
(3.9"...157")
correspondence
DC PNP
Relays
Certificates and certifications
ATEX
Security certifications
Spill protection WHG
Leak detection
subassembly
Transmitter: FTW325
Apply restrictions
Pay attention to the minimum conductivity of the medium
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus conductive limit switch Liquipoint FTW31 product, if you are interested in the conductive limit switch, also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus digital dissolved oxygen sensor Oxymax COS22D with a diameter of 12 mm
Introduction: E+H/Endershaus Digital dissolved oxygen sensor Oxymax COS22D, Oxymax COS22D ensures the safety of media, processes and plant equipment from the effects of oxygen. Reliable measurement in the measuring range helps the user to better monitor and control the operating conditions. Low maintenance of the sensor ...
|
|
E+H/Endershaus Integrated Conductivity Measurement Smartec CLD18 with IP69 degree of protection
Introduction: E+H/Endershaus The Smartec CLD18 is an economical solution for a wide range of applications in the beverage industry, using small pipes and ring measurements as switches. Integrated sensor and transmitter structure, anti-dry...
|
|
E+H/Endershaus Capacitive Level Measurement Liquicap FMI52 Vacuum pressure 100 bar
Introduction: E+H/Endershaus Capacitive Level Measurement Liquicap FMI52, Liquicap FMI52 is a reliable fully insulated probe for continuous level measurement of liquids, especially in small storage tanks, adherent media and extreme high temperatures.
|
|
E+H/Endershaus industrial thermometer iTHERM ModuLine TM131
Introduction: E+H/Endershaus industrial thermometer iTHERM ModuLine TM131, RTD or thermocouple thermometer with integral sleeve, or installed in a field protective sleeve for use. Optionally installed in a modular transmitter that supports the common communication protocol - Bluetooth® technology, in particular ...
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT84
Introduction: The E+H/Endershaus temperature transmitter iTEMP® TMT84 offers excellent reliability, accuracy and long-term stability for critical processes in all industries, not only for the transmission of thermoresistive (RTD) and thermocouple (TC) digital conversion signals, but also for the use of PRO ...
|
|
E+H/Endershaus multipoint thermometer iTHERM TMS02 MultiSens Flex
Introduction: E+H/Endershaus multi-point thermometer iTHERM TMS02 MultiSens Flex, iTHERM TMS02 MultiSens Flex is designed to the highest safety standards and allows customization for different applications.
Features:
The sensor's three-dimensional temperature measurement satisfies ...
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass 65F
Description: The E+H/Endershaus thermal mass flow meter Proline t-mass 65F has a built-in device specifically designed for direct mass flow measurement of industrial gases and compressed air. By lowering the typical turndown ratio of 100:1, operating flow rates and offline leakage can be accurately measured. Built-in gas ...
|
|
E+H Proline Promass X 300 Gas error ± 0.35%
Description: The E+H/Endershaus mass flow meter Proline Promass X 300 with patented four measuring tubes with Premium measurement accuracy (0.05 %) and maximum flow capacity provides excellent performance in coastal/offshore applications in the oil and gas industry. Compatible with the all-in-one transmitter ...
|
|
E+H/Endershaus Ultrasonic Measurement of Travel Time Principle Prosonic FDU95
Introduction: E+H/Endershaus Ultrasonic Stroke Time Principle Prosonic FDU95, the FDU95 ultrasonic sensor is suitable for continuous, non-contact, maintenance-free level measurement of powders and solid lumps. The measurement is not affected by dielectric constant, density or humidity, and the sensor's self-...
|
|
E+H/Endershaus ultrasonic sensor Prosonic FDU91 ultrasonic measurement
Description: E+H/Endershaus Ultrasonic Sensor Prosonic FDU91, the FDU91 ultrasonic sensor is suitable for continuous, maintenance-free level measurement of liquids, slurries, sludges, powders and solid lumps, and can also be used for flow measurement in open channels and measuring weirs.
Give birth...
|
|
E+H/Endershaus Electromagnetic flowmeter Proline Promag P 300 range: 4 dm³, 9600 m³/h
Description: E+H/Endershaus Electromagnetic flowmeter Proline Promag P 300, Promag P sensor for the measurement of high-temperature, corrosive media in chemical and process applications. In combination with the all-in-one transmitter, the Promag P 300 is flexible in operation and easy to integrate into the system.
|
|
E+H/Endershaus Radar Level Gauge Micropilot FMR62B
Introduction: E+H/Endershaus Radar Level Sensor Micropilot FMR62B, Micropilot FMR62B is a member of the new generation of 80 GHz radar level sensors. Continuous non-contact level measurement in demanding liquids, high temperatures, high pressures, and difficult media.
|
|
E+H/Endershaus Guided wave radar measures travel time principle Levelflex FMP54
Introduction: E+H/Endershaus Guided Wave Radar Measuring Journey Time Principle Levelflex FMP54, Levelflex FMP54 is suitable for continuous level measurement under extreme conditions. The ceramic-graphite sealed process connection ensures safe use in high-temperature and high-pressure applications, e.g. for steaming.
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR52
Introduction: E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR52, Micropilot FMR52 uses a flush horn antenna made of integral PTFE material, which has excellent corrosion resistance advantages and is used for level measurement of highly corrosive liquids. The FMR52 sensor passed the ASM...
|
|
E+H/Endershaus radar measurement Micropilot FMR540
Introduction: E+H/Endershaus Radar Measurement Micropilot FMR540, Micropilot FMR540 NMi and PTB certified for metering transfer and inventory control measurements, meeting the relevant requirements of R85 and API 3.1B standards. The FMR540 with parabolic antenna is particularly suitable for ...
|
|
E+H/Endershaus Gauge Pressure Transmitter Cerabar PMP75 with a measuring range of 100 m to 400 bar
Introduction: E+H/Endershaus Gauge pressure transmitter Cerabar PMP75, a digital pressure transmitter with metal diaphragm seal, is mainly used in the process industry and the hygienic industry to measure the pressure, level, volume and mass of liquids or gases. The transmitter is suitable for high temperature and high pressure occasions, ...
|
|
E+H/Endershaus Guided Wave Radar Measuring Travel Time Principle Levelflex FMP57
Introduction: E+H/Endershaus Guided Wave Radar Measuring Travel Time Principle Levelflex FMP57
Features:
Reliable measurement even under variable measuring product or process conditions
HistoROM integrated data storage unit for quick and easy commissioning ...
|
|
E+H/Endershaus Flow switch Flowphant® T DTT31 Maximum process pressure 120 bar
Introduction: E+H/Endershaus Flow Switch Flowphant® T DTT31 This flow switch is designed for the safe measurement, display and monitoring of the mass flow of liquid media with negligible pressure loss. Selectable 1-2 switching outputs, or 1 switching output and 1 standard analog output ...
|
|
E+H/Endershaus Differential Pressure Transmitter Deltabar PMD55B Accuracy 0.1%
Introduction: E+H/Endershaus Differential Pressure Transmitter Deltabar PMD55B The PMD55B is part of the new generation of Deltabar transmitters. The transmitter is rugged and can be operated both on-site and remotely. Using a mobile device and a secure Bluetooth connection, via the app...
|
|
E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU90
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU90, the FDU90 ultrasonic sensor is suitable for continuous, non-contact level measurement of liquids, slurries, sludges, powders and solid lumps, maintenance-free, and can also be used for flow measurement in open channels and measuring weirs ...
|
|
Contact
working hours
