Japan SMC_CY1SG15-250Z rodless actuator 250mm stroke 0.7 MPa

CY1SG15-250Z Introduction: SMC 250mm stroke 0.7 MPa rodless actuator CY1SG15-250Z, 15mm bore diameter, rubber cushioned, M5 x 0.8 port connection, 0.11 kg@ 50 mm

Japan SMC_CY1SG15-250Z picture display

SMCCY1SG15-250Z

Model features introduced

SMCCDY1S10-15mm diameter cylinder

The cylinder is magnetically coupled to the piston - no seal is required, so it avoids leakage and provides automatic switching of high load capacity

SMCCDY1S10-15mm diameter cylinder
medium	air
Test the pressure	10.5bar
Minimum working pressure	1.8bar
Maximum operating pressure	7Bar
Ambient and fluid temperatures	5-60°C
Piston speed*	50-400mm/s
liner	There are rubber pads at both ends
Body material	aluminium
End cap material	aluminium
lube	No, you don't
Wiring port size	M5
Installation	level
Mounting nuts	Standardized, only for basic types (2 pieces)
retentivity	10mm bore: 5.5kgf15mm bore: 14kgf
The pressure corresponds to the holding force	10mm bore: 7.0kgf/cm215mm bore: 7.9kgf/cm2
*If the switch is installed in the middle of the stroke, the piston speed will not exceed 300mm/s.

Note: If the load exceeds the holding force of the magnet, the frame may detach from the internal magnet. In this case, the frame should be pushed by hand to the end of the stroke (or the piston should be moved by air pressure) to re-couple the piston frame to the piston.

Model parameters are introduced

attribute	numeric value
calibre	15mm
itinerary	250mm
Maximum operating pressure	0.7MPa
Absolute maximum pressure	1.5Mpa
Buffer type	rubber
Port connections	M5x0.8
size	342x75x40mm
weight	740g
width	75mm
length	342mm
Size type	standard
height	40mm

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.

This article introduces the Japan brand SMC model as CY1SG15-250Z, the introduction of this product is: SMC 250mm stroke 0.7 MPa rodless actuator CY1SG15-250Z, 15mm bore diameter, rubber buffer, M5 x 0.8 port connection, 0.11 kg@ 50 mm, the purpose of 76 technology is to survive by quality, develop by reputation, and eternity by service, give us a chance and give you a surprise.

Japan SMC_CY1SG15-250Z rodless actuator 250mm stroke 0.7 MPa

Sections viewed

Contact

working hours