KEYENCE/KEYENCE Sensor Head LJ-V7060

Ethernet cable (M12 4pin-RJ-45) NFPA79 standard standard cable 1 m Type: Ethernet cable Length: 1 m Weight: approx. 100 g This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87907 product.

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type (Detection Distance: 250mm) *1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m. ...

Connector cable M12 straight type 2m oil resistant Quantity: 1 End Shape: Sensor Side: M12 4pin Straight, Cable Termination: Loose wire Length: 2 m Material: PUR (Polyurethane) Weight: approx. 75 g This article introduces the KEYENCE/KEYENCE amplifier ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 10m *1 According to Laser Notice No. 56 of the FDA (CDRH), the classification is carried out according to the IEC60825-1 standard.

Sensor head – extension cable for controller 5m CB-A5E Length: 5 m Weight: approx. 400 g This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A5E products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service ...

KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51CN Mini Slim Permeable Type M8 Connector Type 1.2m specification This article introduces the KEYENCE/KEYENCE UV-M/F series of photoelectric sensors with built-in subminiature amplifiers.

Detection distance: 2m Cable type Laser classification 2 Reflective laser sensor with detection distance** up to 5 meters in length, regardless of installation limitations. The distance detection principle is not affected by the surface of the object, and can detect a variety of workpieces. specification *1 Can be displayed from 50 to 2200. *2 FDA(CD ...

Control panel Power cable (M8 4pin- loose wire) 5 m Type: Control panel power cable End Shape: M8 4pin - Loose wire Length: 5 m This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87444 product.

Square Reflective M8 connector type 250mm specification *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". *2 The FDA's (CDRH) laser classification is based on ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P Laser Sensor Amplifier Split Amplifier Cable Type Main Unit PNP *1 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2-point tuning. · The detection range is set during tuning.

Sensor controller handsetter specification *1 Displayed on the IX touch panel or PC software. *2 Can be set according to the program. *3 Diameter tool only, up to 8 pieces. *4 When sample hold (edge), peak/valley, and P-P hold (horizontal/edge) are set. ...

Sensor head wide type laser class 2 LK-H027 specification This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H027 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, we hope ...

M8 connector type cable with high elasticity of 10 m Type: High elasticity Sensor side: M8 4pin straight Cable termination: Loose wires Length: 10 m Material: Cable part :P VC connector part: Brass nickel plated Weight: approx. 370 g This article describes ...

Sensing head 80 mm specification *1 X: Laser long dimension direction, Y : Laser short dimension direction *2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction. *3 When facing at the base distance. Sweep...

Introduction: KEYENCE/KEYENCE Guided Pulse Liquid Level Sensor FL series adopts the newly developed "Sensing Guided Pulse Method", which is not affected by the flow obstruction parts in the environment, and can automatically adjust to the adhesion to achieve stable sensing. After installation, it only takes three steps ...

keyence CMOS Laser Displacement Sensor IL Series Sensor Probe IL-S025 Base distance: 25 mm Measuring distance: 20 to 30 mm Enclosure rating: IP67 Pollution level: 3 Ambient light: Incandescent lamp: 10,000lux*5 Ambient temperature: -1 ...

Introduction: KEYENCE/KEYENCE Current Displacement Transducer EX-V Series High Speed, High Accuracy, This digital eddy current displacement transducer has high resolution and a sampling rate of 40,000 samples per second, and has high resolution and high accuracy due to the use of FLL lines. ...

KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier M8 Connector Type Main Unit LR-XN11C *1 The power cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m. *2 Output 2 and external input are switched ...

Sensor head wide type LK-H008W specification This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H008W products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our ...

Multi-function sensor controller mother machine specification *1 Depending on the connected model, the response time and the type and number of inputs/outputs that can be used may vary. For details, refer to the "MU-N Series User Manual" of the connected model. *2 Number of connections to N-bus devices ...