KEYENCE Sensor Head LJ-V7020 Reference distance: 20 mm
Output 10 mW
Ambient temperature 0 to +45 °C*11
Material: Aluminum
Weight approx. 410 g
*1 The W polarization function cannot be used.
*2 Do not use optical devices (such as binocular magnifiers, magnifiers, microscopes, telescopes, binoculars, etc.) to directly observe the laser beam.
Observing the laser output with an optical device may cause damage to the eyes.
*3 The FDA's (CDRH) laser classification is based on IEC60825-1 and implemented in accordance with the requirements of Laser Notice No. 50.
*4 This value is averaged over 4096 times over the reference distance.
*5 The measurement target is a KEYENCE standard object. In altitude mode, this is the average of the heights of the initial set range. Others are the initial settings.
*6 The target for measurement is a needle gauge. This is the value of measuring the intersection of the R-face and the edge of the needle gauge in position mode. Others are the initial settings.
*7 The measurement target is a KEYENCE standard object. Contour data measured after 64 smoothing and 8 averages. Others are the initial settings.
*8 High-speed mode refers to the state when the measurement range is minimized, the binning function is enabled, the shooting mode is standard, and the side-by-side shooting function is turned on. Others are the initial settings.
The high-performance mode is the state when the measurement range is minimal, the binning function is on, and the shooting mode is standard. Others are the initial settings.
*9 Values when sensor head cable (CB-B*) or extension cable (CB-B*E) is connected.
*10 When measuring on white paper, the brightness of the light-receiving surface of the sensor head is when it is aligned with the irradiated white paper.
*11 The sensor head must be mounted on a metal plate.
This article introduces KEYENCE/KEYENCE sensor head LJ-V7020 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business
|
More on that
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX Series
Identifies the height of various locations within the area
The workpiece is captured by the camera and the specified point is tracked
The height of the specified point is identified by the laser
Lasers can detect the height and height difference of multiple points of the target at the same time, even if the product position is skewed.
Product Features:
A la carte ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor CZ-V20 Series The input time is 20ms
Introduction: KEYENCE/KEYENCERGB Digital Fiber Optic Sensor CZ-V20 series two new sensor heads once again broaden the application range of ultra-small RGB sensors; The setup is simple, and the setup can be completed with just one button press; Three detection modes are available for a wide range of targets.
...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1050
keyence KEYENCE CMOS Laser Displacement Sensor Amplifier Unit DIN Rail Mount Type IL-1050
Power supply voltage: Supplied by the main module*3
Power consumption: 2000 mW or less (67 mA or less at 30 V)
Pollution level: 2
Ambient temperature: -10 to +50 °C ( ...
|
|
KEYENCE/KEYENCE Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3PL
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3P L Flat BGS Reflective M8 Connector Type 15mm
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has a shading ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-080
Sensing head 80 mm
specification
*1 X: Laser long dimension direction, Y : Laser short dimension direction
*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.
*3 When facing at the base distance. Sweep...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50C (Detection Distance: 50mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50C Laser Sensor Standard M8 Connector Type (Detection Distance: 50mm)
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 Select 500 μs ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-H2050
Sensor controller handsetter
specification
*1 Displayed on the IX touch panel or PC software.
*2 Can be set according to the program.
*3 Diameter tool only, up to 8 pieces.
*4 When sample hold (edge), peak/valley, and P-P hold (horizontal/edge) are set.
...
|
|
KEYENCE/KEYENCE P-M/F Series P-MB15C3PL PHOTOELECTRIC SENSOR WITH BUILT-IN ULTRA-COMPACT AMPLIFIER
Mini Slim BGS Reflective M8 Connector Type 15mm PR-MB15C3PL
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".
Example) P ...
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series LR-TB5000C
Detection distance: 5m M12 connector cable type laser classification 2
specification
*1 Can be displayed from 50 to 5200.
*2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.
*3 I/O can be advanced from the following combinations ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series OP-76877
DIN Amplifier Fixing Bracket (1 pc)
Summary: A sturdy bracket for holding a DIN amplifier.
Applicable products: AP-V80, CZ-V1/K1, FD-V70, FD-V40, FT, FW-V20, FD-MA1, GV-21/22, GT-71 (A), FD-SA1/2, FD-UA1
Number of Builts: 1pcs
...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H052
Sensor head Spot type laser class 2 LK-H052
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H052 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series Amplifier Bracket OP-88542 for Standard Type
KEYENCE Laser Sensor LR-X Series Amplifier Bracket for Standard Type OP-88542
Shape: Amplifier Bracket for Standard Type (M3 Screws × 2 Accessories)
Material: SUS304 etc
Weight: approx. 32 g
This article introduces the KEYENCE/KEYENCE laser sensor ...
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series OP-88025
Cable M12 straight type between sensor and controller 2m
end shape; Sensor side: M12 4pin straight, controller: connector
Length: 2 m
Material: PVC (Vinyl Chloride)
Weight: approx. 75 g
This article introduces the KEYENCE/KEYENCE amplifier built-in type of TOF...
|
|
KEYENCE/KEYENCE Built-in Photoelectric Sensor PR-M/F Series PR-M51N1
Mini Slim Permeable Cable Type 1.2m PR-M51N1
Specification:
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-M51N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51C3PD
Mini Slim Permeable Type M8 Connector Type 1.2m
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".
Example) PR-M51C3PL ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87906
I/O cable 3m
Type: I/O cable
Length: 3 m
Weight: approx. 230 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87906 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100CG (Detection Distance: 100mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type
This article introduces the KEYENCE/KEYENCE laser sensor LR-X series LR-X100CG (detection distance 100mm) products.
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A07
Sensor head-controller cable 0.7m CB-A07
Length: 0.7 m
Weight: approx. 100 g
This article introduces the KEYENCE/KEYENCE sensor head-controller cable CB-A07 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, I ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor FS-N Series 16 expansion units
Introduction: Easy setup of the new concept of the FS-N series of digital fiber optic sensors. It only takes one touch to set the sensitivity and reset the display value. The sensor automatically detects if the light has dropped due to dirt and automatically recalibrates to the original display state. The power of the sensor is increased ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-G5001 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, I ...
|
|
Contact
working hours
