Mini Slim Permeable Cable Type 1.2m PR-M51N1
Specification:
| Model | PR-M51N1 | | type | permeance | | output | NPN | | shape | Compact and slender | | Connection patterns | 1m cable | | Detection distance | 1.2 m | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when shading | | Output 2 | ON when light is in | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | ― | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | ― | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | Transmitter: 11 mA, receiver: 16 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | About 42 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-M51N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87457
Ethernet cable (M12 4pin-RJ-45) NFPA79 standard standard cable 2 m
Type: NFPA79 standard Ethernet cable
End shape: M12 4pin-RJ-45
Length: 2 m
This article introduces the KEYENCE/KEYENCE multi-point laser sensor OP-87457 ...
|
|
KEYENCE/KEYENCE Proximity Sensor ET Series consumes 45mA
Introduction: KEYENCE's ET series miniature probe head, innovative sensing technology, does not detect ferrous metals, accurately detects non-ferrous metals, and is suitable for ultra-small proximity sensors of various non-ferrous metals (including aluminum).
Product parameters
...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87621
Connector cable M8 straight type 2m chemical resistant
Type: Connector cable Chemical resistant
End shape: M8 straight - scattered
Length: 2 m
Material: Cable: PVC, Nut: SUS316L
Weight: approx. 75 g
This article introduces the KEYENCE/KEYENCE amplifier built-in CM ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-88044
NFPA79 standard Ethernet cable L type 5 m
Length: 5 m
Note: Used for the connection between sensors, PCs or Ethernet switches. When using the IV Series as a UL certified product, use an NFPA79-capable Ethernet cable.
This article introduces the KEYENCE/KEYEN...
|
|
KEYENCE/KEYENCE Photoelectric Sensor PZ-G Series weighs about 10g
Introduction: KEYENCE's powerful optical photoelectric sensor PZ-G series ultra-high power built-in threaded sensor, significantly improved performance and easy to use, the sensor head lineup is available in transmissive type, reflective type and regressive reflective type, the appearance of the alignment indicator makes the optical axis alignment of the long-distance sensor ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZH500CN
Square type High power reflective type M8 connector type 500mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 Cleaned by each company ...
|
|
KEYENCE/KEYENCE CMOS laser sensor LK-G5000 series with a wavelength of 655mm
Summary: Laser displacement sensors must have the same combination of speed, accuracy and performance in order to excel in a wide range of applications. The LK-G5000 uses high-end technology to strive for excellence in every aspect. The ability to deal with speed, accuracy, and various targets is a comprehensive pursuit of "super ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51CN
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Mini Slim Permeable Type M8 Connector Type 1.2m
specification
This article introduces the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F series.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001V
Built-in controller NPN
specification
NPN integrated open output rating: 50 mA max. (40 V max), residual voltage: 0.5 V max
Voltageless input rating: on-voltage max. 1 V, off-current max. 0.6 mA
*2 Some internal input/output voltages of the LK-G5000 series ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series OP-87635
Connector cable M12 straight 10m standard
Quantity: 1
End Shape: M12 Straight - Scattered
Length: 10 m
Material: Cable part: PVC, nut part: zinc nickel plating
Weight: approx. 430 g
This article introduces the KEYENCE/KEYENCE amplifier built-in TOF excitation ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87458
Ethernet cable (M12 4pin-RJ-45) NFPA79 standard standard cable 5 m
Type: NFPA79 standard Ethernet cable
End shape: M12 4pin-RJ-45
Length: 5 m
This article introduces the KEYENCE/KEYENCE multi-point laser sensor OP-87458 ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H058
Sensor head wide type laser class 3B LK-H058
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H058 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H055
Sensor head wide type LK-H055
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H055 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor FS-V30 Series has a response speed of 33μs
Introduction:High-power, ultra-simple, high-reliability FS-V30 digital fiber optic sensor. The high-power beam provides stable detection in demanding environments.
Product parameters
This article introduces the KEYENCE/KEYENCE Fiber Optic Sensor F...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-S065
keyence CMOS Laser Displacement Sensor IL Series Sensor Probe IL-S065
Base distance: 65 mm
Measuring distance: 55 to 75 mm
Highlight range (at reference distance): approx. 55×1700 μm
Enclosure rating: IP67
Pollution level: 3
Ring...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB250C3P
Square Reflective M8 connector type 250mm
*1 The M8 connector (3-pin) type does not have an external input function.
*2 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250 (Detection Distance: 250mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250 Laser Sensor Standard Cable Type (Detection Distance: 250mm)
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· When tuning, the detection range screen is set ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-100
Base distance: 100 mm
Measuring distance: 75 to 130 mm
Enclosure rating: IP67
Pollution level: 3
Ambient light: Incandescent lamp: 7,500 lux*5
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relative humidity: 35 to 85 % RH ...
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-CC4
Power cable for MU-N series
End Shape: Cable Termination: M12 4pin Straight, Controller: Connector
Length: 0.3 m
Material: PVC (Vinyl Chloride)
Remarks: For the main unit
Weight: approx. 30 g
This article introduces the KEYENCE/KEYENCE amplifier built-in type of TOF...
|
|
KEYENCE/KEYENCE Guided Pulse Level Sensor FL Series IP67 Protection
Introduction: KEYENCE/KEYENCE Guided Pulse Liquid Level Sensor FL series adopts the newly developed "Sensing Guided Pulse Method", which is not affected by the flow obstruction parts in the environment, and can automatically adjust to the adhesion to achieve stable sensing. After installation, it only takes three steps ...
|
|
Contact
working hours
