Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21/RW - 2900346

PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 24 V DC

Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21/RW - 2900346

advantage

Due to its wide range of electrical applications, optimal relay operation can be carried out

Certified in accordance with EN 50155

Secure isolation between coil and contact in accordance with DIN EN 50178

Vibration and shock resistance according to IEC 50155

Temperature range -40 °C ... + 70 °C (up to 85 °C for short periods)

Input voltage range 0.7-1.25 x UN (1.4 x UN for short term)

Coil side

Rated input voltage UN 24 V DC

Input voltage range 20.2 V DC ... 33.6 V DC

Input voltage range with UN as reference 0.7 ... 1.25

Typical input current at UN is 20 mA

Typical response time is 5 ms

Typical release time is 11 ms

Coil voltage 12 V DC

Protection circuits: bridge rectifiers; Bridge rectifiers

spare diodes; Freewheeling diodes

Surge protection

RCZ filter

Various electronic components

The operating voltage is displayed with a yellow LED

handoff

Contact Type: 2 changeover contacts

Switch contact type Single contact

Drive and function monostability

Drive (Polarity) Bipolar

Contact material AgNi

Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), the bulkhead PLC-ATP must be used.) ）

Minimum switching voltage 5 V (10 mA)

Limit continuous current to 6 A

Maximum start-up current 15 A (300 ms)

Minimum switching current 10 mA (5 V)

Maximum power rating (resistive load) 140 W (24 V DC)

85 W (for 48 V DC)

60 W (can be used for 60 V DC)

44 W (for 110 V DC)

60 W (for 220 V DC)

1500 VA (can be used for 250VAC)

Switching capacity 2 A (at 24 V, 13 DCs)

0.2 A at 250 V, 13 DCs

3 A (at 24 V, AC15)

3 A (at 120 V, AC15)

3 A (at 250 V, AC15)

Connection: Push-in connection

Stripping length 10 mm

Rigid conductor cross-section 0.14 mm² ... 2.5 mm²

Flexible conductor cross-section 0.14 mm² ... 2.5 mm²

0.2 mm² … 2.5 mm² (single sleeve)

2x 0.5 mm² … 1 mm² (TWIN sleeve)

Attachable guide cross-section AWG 26 ... 14

Mounting Type: DIN rail mounting

Assembly Instructions Arrangement without spacing

Installation Position Any

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.

The above is the Germany brand Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21/RW- 2900346 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternity by service, give us a chance, and give you a surprise.

Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21/RW - 2900346

Sections viewed

Contact

working hours