Plug-in miniature power relay with power contacts for high inrush currents, 1 NO contact, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 16 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3
Insulation: Safety isolation, reinforced insulation
Maximum power consumption of 0.4 W under rated conditions
Test voltage 5 kV AC (50 Hz, 1 minute, coil/contact)
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Coil side
Rated input voltage UN 12 V DC
Input voltage range 9.6 V DC ... 27 V DC
The input voltage range referenced to UN is shown in the graph
Typical input current at UN is 33 mA
Typical response time is 8 ms
Typical release time is 3 ms
Coil resistance 360 Ω ±10 % (20 °C)
handoff
Contact Type: 1 N/O contact
Switch contact type Single contact
Drive and function monostability
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (100 mA)
Limit continuous current to 16 A
Maximum start-up current 80 A (20 ms)
130 A (peak, capacitive load, 230 V AC, 24 μF)
Minimum switching current 100 mA (for 12 V DC)
Maximum power rating (resistive load) 384 W (24 V DC)
58 W (can be used for 48 V DC)
48 W (for 60 V DC)
50 W (can be used for 110 V DC)
80 W (can be used for 220 V DC)
4000 VA (can be used for 250VAC)
Minimum on-off capacity 1200 mW
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.2 A at 250 V, 13 DCs
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
Environmental conditions
Protection class RT II
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Altitude ≤ 2000 m
Mounting Type: Plug-in installation
Assembly Instructions Gap-free arrangement (> 70 °C ≥ 2.5 mm)
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix single relay REL-MR- 12DC/1IC - 2904475 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-230/21-LC AU -2964393
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts for small loads, 1PDT, input voltage 230 V AC/DC
advantage
Integrated input module and interference suppression module
The maximum power consumption under the rated condition is 1.15 W
Test voltage (coil/contact) ...
|
|
REL-MR-120AC/21-21AU - Phoenix/Single Relay from Phoenix - 2961477
Plug-in miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 120 V AC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 120 V AC
Input voltage range 93.6 V AC ... 186 V AC
Trunk frequency 50/60 h ...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21/MS - 2909651
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with power contacts and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
Advantage: Low-profile design
size
Width 6.2 ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 12DC/21-21AU - 2961299
Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 12 V DC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 12 V DC
Input voltage range 7.8 V DC ... 29.76 V DC
Typical input current at UN ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - TR-ES-OFF-CC-24/240-10H - 2907320
Phoenix/Phoenix Time Relays Timing relay - TR-ES-OFF-CC-24/240-10H - 2907320 timer relay with delay release and an adjustable time range (50 ms - 10 h), supply voltage 24-48VDC/24-240VAC, 1 PDT
size
Wide...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21/EX - 2909525
PLC-INTERFACE, consisting of DIN-rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. It has been approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 requirements.
|
|
Relay module with manually operated locking - PLC-RSC- 24UC/21HC/MS - 2910515
PLC-INTERFACE, incl. relay base and pluggable power contact relay with manual operation and integrated status LED, screw connection, 1 changeover contact, input voltage: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21AU - 2900311
PLC-INTERFACE, incl. PLC-BPT.../21 base terminals, plug-in connection, with plug-in miniature multi-layer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 230 V AC/220 V DC
advantage
Low-profile design
Adaptable via V8 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1IC/ACT - 2900298
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BPT.../1 IC/ACT base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with an inrush current of up to 130 A, 1 NO contact, input voltage 24 V DC
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21HC/RW - 2900324
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals with plug-in connection and plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
Advantage...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/ 2AU/SEN-2966443
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminal with screw connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 NC contact, input voltage 230 V AC/220 V DC
Rated ...
|
|
Phoenix/Phoenix relay module PLC-RPT-12DC/1/SSI - 1094765
PLC-INTERFACE, CONSISTING OF BASE TERMINALS WITH PLUG-IN CONNECTIONS AND "HOT" PLUG-IN MINIATURE RELAYS AS WELL AS INTERNAL AMPLIFIER CIRCUITRY AND AN APPROPRIATE AUXILIARY POWER SUPPLY FOR WEAK SIGNAL SOURCES, 1 NO NO NO U, 12 V DC RATED INPUT VOLTAGE
The maximum power consumption under the rated condition is 0.22 W
...
|
|
Phoenix/Phoenix relay modules EMG 25-REL/KSR-230/2X21AU/SO46 - 2964843
Interference immunity on the control side of the relay interface with solid-state miniature electromagnetic relay, contact (Au): small load, 2PDT, input voltage 230V AC
Maximum power consumption under rated conditions is 4.14 W
Test voltage (coil/contact) 2.5 kV AC (50 Hz, 1 minute, coil/contact ...
|
|
Phoenix/Phoenix single relay REL-MR-BL- 12DC/21HC - 1109537
Plug-in miniature power relay, basic design, with power contacts, for high continuous current, 1 changeover contact, input voltage 12 V DC
Coil side
Rated input voltage UN 12 V DC
Input voltage range 8.4 V DC ... 27 V DC
Typical input current at UN ...
|
|
Phoenix/Phoenix Single Relay REL-PR1- 48DC/1/MB - 2908613
Plug-in high-power relay with power contacts, designed for switching high DC loads, 1 normally open contact, arc extinguishing magnet, coil voltage: 48 V DC
Coil side
Rated input voltage UN 48 V DC
Typical response time is 20 ms
Typical release time is 15 ms
handoff
Contact Type ...
|
|
RIF-1-RSC-LV-120AC/2X21AU - 2903344
Prefabricated relay modules with screw connections, including: relay bases, multi-layer contact relays, pluggable display/interference mitigation modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 120 V AC
Maximum power consumption under rated conditions is 0.96 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21AU/RW - 2900349
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature multi-layer gold-plated contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 24 V DC
Excellent...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/L- 24AC/2X21 - 2903666
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, mechanical switch position display, input voltage: 24 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21AU - 2900307
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal block with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V AC/DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR- 24/21-LC - 2942658
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 24 V AC/DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage Coil/contact 4 kV ...
|
|