Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 110 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 110 V DC
Typical input current at UN is 8 mA
Typical response time is 13 ms
Typical release time is 14 ms
Protection circuit: Damping diode
The status display LED is yellow
Power consumption at rated conditions is 0.88 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connect your data
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/LDP-110DC/4X21AU - 2903673 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix relay EMG 17-REL/KSR-G 24/2E/SO38 - 2941646
Relay module, resistant to continuous high current, soldered with relay plug, contacts (AgSnO): medium to large loads, 1 normally open contact, input voltage 24V DC, maximum continuous current 10A, 2 inputs manual/automatic
advantage
Can be snapped onto standard EN DIN rails
...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/21AU - 2961121
Pluggable miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Give birth...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/2X21/FG - 2910537
PLC-INTERFACE, incl. relay base and plug-in safety relay with positively guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forced actuation, freewheeling diode, input voltage: 24 V DC
Test voltage coils/contacts ...
|
|
Phoenix/Phoenix relay module PLC-2RPT-24DC/1 - 2901639
PLC-INTERFACE with two independent relays, incl. PLC-BPT.../21 base terminal, plug-in connection with two integrated relays, power contacts for mounting on DIN rail NS 35/7.5, 2 x 1 NO contacts, input voltage 24 V DC
Application Two ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 48DC/21-21AU - 2967280
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 48 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/ 1AU/SEN - 2966333
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminal with screw connection with plug-in miniature multilayer gold-plated contact relay for mounting on the DIN rail NS 35/7.5, 1 NO contact, input voltage 230 V AC/220 V DC
advantage
...
|
|
Phoenix/Phoenix relay module PLC-2RSC-24DC/ 1 - 2987309
PLC-INTERFACE with two independent relays, including PLC-BSC.../21 base terminal, screw connection and with two integrated relays, power contacts for mounting on DIN rail NS 35/7.5, 2 x 1 NO contacts, input voltage 24 V DC
advantage
6.2 ...
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-230AC/2X21AU - 2903327
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 230 V AC
Test voltage coil/contact 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21-21 - 2900336
The PLC-INTERFACE, consisting of the Push-in base terminal block PLC-BPT.../21-21 and the plug-in miniature relay with power contacts, can be mounted on a DIN rail type NS 35/7.5, 2 PDTs, input voltage 230 V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix Relays PLC-RPT-110UC/21HC/RW - 2900326
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals, plug-in connection with plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 110 V DC
Excellent...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-110DC/4X21 - 1109560
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life ...
|
|
Phoenix/Phoenix Single Relay REL-MR-BL- 48DC/21-21 - 1109544
Plug-in miniature power relay with power contacts, 2 changeover contacts, input voltage 48 V DC
Coil side
Rated input voltage UN 48 V DC
Input voltage range 33.6 V DC ... 108 V DC
Typical input current at UN is 8.7 mA
Typical response ...
|
|
Phoenix/Phoenix single relay - REL-MR- 24DC/21-21 2961192
Plug-in miniature power relay with power contacts, 2 PDTs, input voltage 24 V DC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/ 1AU/MS/SEN-2909679
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 NO contact, 120 V AC/110 V DC input voltage
Maximum power consumption under rated conditions 0.42 ...
|
|
Phoenix/Phoenix relay module - RIF-4-RPT-LDP-24DC/3X21 2903278
Pre-assembled relay modules with plug-in connections, including: relay base, high-power contact relay and bracket. Contact type: 3 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 20.4 V DC ... 26.4 V DC ...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-230/21-LC - 296438
Relay module with solid state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 230 V AC/DC
The maximum power consumption under the rated condition is 1.15 W
Test voltage (coil/contact) 4 kV AC (50 Hz, 1 minute, coil/contact) ...
|
|
Phoenix/Phoenix single relay REL-PR-BL- 24DC/4X21 1157980
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 24 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Coil side
Rated input voltage UN 24 V DC
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21AU - 2961163
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Ruler...
|
|
Relay module with manually operated locking - PLC-RSC-230UC/21HC/MS - 2910518
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), screw connection, 1 changeover contact, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 48DC/21HC - 2900294
The PLC-INTERFACE is suitable for high continuous currents and consists of PLC-BPT.../21 HC base terminals with plug-in connection with plug-in miniature relays for mounting on the DIN rail NS 35/7.5 with a maximum continuous current of up to 10 A, 1 PDT, and an input voltage of 48 V DC
advantage
...
|
|
Contact
working hours
