What is a multi-operation system? The multi-operation system refers to the installation of multiple industrial computer operation systems on one computer, and each system is independent of each other. Users can install other versions of the system on the basis of the original system.
The multi-operation system is used more in daily life, and the installation of two or more operating systems in the industrial computer can facilitate the use of users. When the computer is turned on, you can choose the operating system to be used, and the systems are independent of each other.
The advantage of the dual-operation system device or multi-system of the industrial computer is that it can use two systems on one industrial computer to test new things. In addition, once a system presents a problem, the user can enter another system, and will not be unable to boot the computer to work because the system collapses. The application scope of the industrial computer has been expanded, and the two systems are independent, which can operate separately to ensure safety. Such as one for entertainment, one for work, etc. Maybe one runs a program that doesn't work in another system.
The disadvantage is that it occupies a certain amount of space on the hard disk, and it is necessary to install the dual system on different hard disks, which will naturally occupy a certain amount of hard disk space. The protection of the dual system is also relatively difficult, and the switching between different systems requires shutdown and restart.
So how to operate our industrial computer dual-operation system device? There are many things that users need to pay attention to in the installation process of the dual-operation system, including the sequence of devices and the ways to deal with problems in the process of installation. Only by understanding these problems can we correctly deal with the problems in the process of the installation and successfully complete the installation. The detailed installation process is as follows:
1. The first operating system of the device, if there is already an operating system, the installation can also be carried out in the existing operating system. In general, the device sequence of the operating system starts from the lower version of the system device, and the equipment from the low to the high device can effectively prevent errors in the time and time of operation of the system.
2. When the industrial computer dual-operation system device is operated, it can create a partition for the hard disk, and it can also enter the system for partitioning after the system device is completed; It is necessary to create a new blank zone for the system of the subsequent installation.
3 In the same way, the second system is installed in the blank space of creation.
4. After the system device is completed, you can select the system you want to enter during the boot process of the industrial control server computer. The same approach can be used to install multiple operating systems.
The device of the multi-operation system is usually the first to install an operating system, and then partition the computer hard disk, to divide a suitable space for the operating system of the device to be installed, and download the system file of the device to be installed, you can install another operating system in the divided hard disk space, and the device of the multiple operating system can be realized by using the same method.
After the device is completed, you can use the arrow keys on the keyboard to select the system to enter when the industrial computer is turned on, and press the [Enter] key.
|
More on that
|
EVOC IPC problem analysis
In fact, there is not much difference between the industrial computer and the general computer, only the power supply and the motherboard are nominally more stable and reliable than the general computer, after all, the requirements of the industrial site are a little higher than the civil one, the so-called industrial computer encounters the same problems as the general computer, such as the black screen of the crash can not be started ...
|
|
Precautions for the use of resistive screens in industrial tablet PCs - EVOC
Industrial tablet PC is a kind of industrial computer, which is an all-in-one structure, and the host, liquid crystal display, and contact screen are integrated. It has the characteristics of contact function, consolidation, vibration prevention, wide temperature, rich I/O interface, etc., which makes it more convenient and fast to communicate, communicate, input and accept information between the user and the machine.
|
|
Industrial switch fault type - EVOC
First, the power supply problem
Due to the unstable external power supply, the aging of the power supply line or lightning strikes, etc., the power supply is damaged or the fan stops, resulting in abnormal operation. Perhaps damage to other parts of the machine due to the power supply will cause problems in the AC machine.
If the delivery ...
|
|
Affect the running speed configuration of industrial computer - EVOC
As a special computer equipment in the marginal field, industrial computer has been more and more widely used in various occupations in recent years, but many professional bosses or users still have a relatively one-sided understanding of industrial computers, and it is easy to fall into the misunderstanding of selecting equipment when buying industrial computers. How does equipment affect industrial control ...
|
|
Common faults and solutions of CNC cutting industrial computer
Many of the problems that may arise from the failure of the industrial computer of the CNC cutting machine are caused by the working environment, and the common ones are as follows:
1. The industrial computer has a long working time. Due to the demand for normal production, some factories ...
|
|
EVOC product advantages
1. The most powerful CPCI product R&D team in China can provide the most complete and complete CPCI reinforcement product solutions in China.
2. EVOC CPCI products are used in military industry, communications, rail transit, security, electric power, steel ...
|
|
Common problems and solutions of industrial computer - EVOC industrial computer
1. It can be powered on but not lit
1. There is no alarm sound display of Didi when booted, maybe it is poor contact of memory oxidation or there is a problem with the memory itself, the solution is to wipe the memory with an eraser and reinsert it back after power-off, and replace the memory with its own problem.
|
|
Key points of judgment of industrial computer installation failure - EVOC
1. Device operation system
First: Review the settings in the CMOS and, if needed, revert to factory settings. Secondly: pay attention to the parameters of the hard drive, the temperature of the CPU, etc. Observe whether the information displayed during the self-test of the industrial computer is consistent with the actual hardware configuration.
...
|
|
Method for judging that the industrial computer needs to be reinstalled on the system - EVOC
During the use of the industrial computer, the user mistakenly deleted the system file, resulting in an abnormal function of the industrial computer; The industrial computer was invaded by a virus Trojan horse, which led to problems in the system; Some fault prompts frequently pop up on the desktop, and the industrial computer needs to be reinstalled in the system. Strictly speaking, the industrial computer ...
|
|
Built-in IPC customization considerations
With the development of a new generation of information technology such as artificial intelligence, big data, and the Internet of Things, the industrial control system has begun to develop in the direction of intelligence, networking, and digitalization. Embedded industrial computer is a major development in recent years.
|
|
The reason for the short circuit of the industrial control motherboard - EVOC
The motherboard is one of the key hardware of the industrial control host. The configuration of the industrial control computer system is connected to the socket of the motherboard to transmit data. The quality of the motherboard determines the stability of the entire system of the industrial control computer. In the process of using the industrial control motherboard, people may encounter such a situation ...
|
|
EVOC's choice of high-speed data acquisition card
When choosing a high-speed data collection card, you can generally consider the following goals:
Sampling rate, resolution, number of channels, bus, etc. The selection of the key to see what your high-speed data collection card is for, to avoid blindly selecting data collection ...
|
|
Daily management and maintenance of EVOC industrial computer
First of all, it is necessary to give EVOC industrial computer a stable working environment. If there is a sensation when the machine reads and writes to a disk or hard disk, the drive will be severely worn or damaged. If you want to place it against a wall, there should be at least a gap from the wall to ensure good heat dissipation.
|
|
How to buy industrial control motherboard - EVOC
Industrial control boards generally have BIOS chips, I/O control chips, keyboard and panel control switch interfaces, indicator adapters, expansion slots, DC power adapters for motherboards and cards, and other motherboards suitable for industrial occasions. It is selected by an industrial computer and can be operated in a wide temperature environment according to the needs of the industrial computer.
|
|
The difference between PLC and industrial computer application - EVOC
The full English name of PLC is Program mable Logic Controller, which was produced in the early 70s of the 20th century. The earliest PLC appeared as a replacement relay system, and its main function was only a logical and simple sequential control function.
...
|
|
The interconnection method of PCB circuit boards - EVOC
The cable connection between the two PCB printed boards is not easy to present connection errors, and the relative orientation of the two PCB printed boards is not constrained.
Direct welding between printed boards, this method is often used for the connection between two printed boards at an angle of 90 degrees. Articulated to become a whole PC...
|
|
EVOC IPC common faults and solutions
● After booting up, the motherboard can work normally, and the BIOS detects the keyboard part, stating that the keyboard is wrong?
The first thing to see is whether the keypad lock is locked, and the keypad lock is exempted. If not, check whether the cable between the motherboard and the backplane and the keyboard and mouse are connected correctly.
...
|
|
Incompatibility analysis of EVOC memory and industrial motherboards
Memory is one of the most important components in an industrial motherboard, which is mainly used to temporarily store the computing data in the CPU and the data communicated by the external memory. In the operation of industrial computers, there may be incompatibility between memory and industrial motherboards. Memory is mainly composed of memory chips, circuit boards and gold fingers, etc.
|
|
EVOC Industrial Motherboard Features:
Industrial motherboards are widely used in self-service terminals, medical instruments, industrial control, automation equipment, telecommunications, electric power, network, rail transit and other fields in terms of planning, materials, production, manufacturing, etc., attaching importance to reliability, vibration resistance, wide temperature and other characteristics. ...
|
|
EVOC uses the case fan correctly
One. How to use the case fan correctly --- importance of the direction of the case fan
If you find that the fan is installed, the heat dissipation performance of the host is not improved or even becomes worse, it is likely that the direction of the fan is reversed.
|
|
Contact
working hours
