How to calibrate the screen of the touch all-in-one machine?

1. Enter the system settings interface of the Weilun touch screen, and select the "Power Management" option in the "System Settings". 2. In "Power Management", you can set how long the touch screen will automatically enter the "standby" state without operation, and you can also set how long it will enter the "...

1. Enter the Weiluntong touch screen setting interface, find the input method option, and change it to the corresponding text type (such as Chinese Simplified, English) to solve the problem. 2. Install the corresponding input method, which can also solve this problem. ...

When the system setting password of Verun Tong touch screen hardware is lost, the factory settings can be restored by the system initialization method. There are four ways to enter the touch calibration of the touch screen of Veruntong, and the initialization of the operating system can only be carried out through the DIP switch. 1. DIP switch mode touch calibration ...

The five-wire resistive touch screen and the four-wire resistive touch screen both adopt the principle of analog resistance, and their conventional fault characteristics are exactly the same as those of the four-wire resistor. If you are using a five-wire resistive touch screen, when there is an installation and maintenance problem, please determine and solve the problem in the following order. ...

An overview of the principles To complete multi-touch on the capacitive screen, it relies on adding electrodes of mutual capacitance, in short, the screen is divided into blocks, and a group of mutual capacitance modules are set up in each area to work independently, so the capacitive screen can independently detect the touch status of each area.

4. Use Fault 4.1 What should I do if the newly purchased touch screen downloads the programmed program and it cannot be touched or the touch freezes? First of all, hit the No. 2 DIP switch on the back of the screen to the direction of on, and then power on to see the copyright of the last line of the screen.

Precautions when using Verun Tong inverter 　　When shipping and storage During the storage period, it is necessary to ensure that the inverter is not subjected to physical shocks and oscillations. It is also necessary to ensure that they are not exposed to rain and are not placed in places where the ambient temperature is too high. When transferring, hold the bottom of the body ...

(1) The surface acoustic touch screen is a high-durability structure, which is scratch-resistant and anti-violence. Because the working surface of the surface acoustic touch screen is a layer of invisible and indestructible acoustic energy, the base glass of the touch screen does not have any interlayer and structural stress (the surface acoustic wave touch screen can be developed to a straight ...

The R&D team of Weiluntong Technology has launched an Internet of Things intelligent communication gateway for the solution of "data transmission and integration of the Internet of Things": cMT-G01. With the rise of the concept of the Internet of Things and the emergence of various smart factories, you will face the biggest dilemma as an engineer ...

1. Create a new device driver: Enter the IP of the PLC. 2. Create a new PLC variable from Siemens. 3. Create a new button and download it to the touch screen.

(1) The indicator light of the boot host is normal, but the monitor shows no signal input (black screen); (2) Press the on/off button, but the host has no response (the indicator light is not on, and the host cannot be heard to start); (3) The computer is restarted repeatedly, accompanied by crashes and blurred screens; (4) The screen is broken ...

1、eMT3120A 12.1" TFT display 1024*768 dots, brightness 500, contrast ratio 700:1, 16.2M color, 256MB memory, DC19.2-28.8VDC power supply, four-wire resistive, SD card slot, support SD/SDHC, USB Host USB 2.0 ...

1. Plug in the U disk on the touch screen, you don't need to power off the screen, the screen supports the hot-swap function, but at this time, it is best not to communicate with external devices to reduce unnecessary impact. When the screen detects an external device, a dialog box will pop up, select the second Upload Project.

1. Novelty of operation The capacitive touch screen supports multi-touch, making operation more intuitive and fun. 2. It is not easy to be touched by mistake Because the capacitive touch screen needs to sense the current of the human body, as long as the human body can operate it, there will be no ...

When the HMI communication failure is caused by on-site interference, the following methods can be used to troubleshoot the fault: The communication line adopts shielded twisted pair cable, and the shielding layer needs to be grounded at one end, that is, only one end of the PLC and the touch screen can connect the shielding layer to the ground horn (it is recommended to connect it to the HMI end of the touch screen) ...

1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.

　　Human-computer interface (also known as user interface or user interface) is the medium of interaction and information exchange between the system and the user, which realizes the transformation between the internal form of information and the form acceptable to humans. Human-machine interfaces exist in all areas involved in the exchange of information between humans and machines. 　 ...

1. Open the touch screen of Weiluntong, click "Alarm Information" on the left menu bar, and enter the "Alarm Information Management" interface; 2. In this interface, you can see all the current alarm records, click "Function", select "Clear All Alarms", you can clear all historical reports.

1. When turning on and off the power of the machine, it should be operated in strict accordance with the regulations; 2. According to the severity of the environment, set a time limit to open the machine head to clean the reflective stripes and inner surface of the touch screen; 3. At present, the mainstream industrial display program does not have a mouse cursor, because the flashing of the cursor will ...

On November 7, 2017, the five-day 2017 China International Industry Fair (hereinafter referred to as the "Industry Fair") opened at the National Convention and Exhibition Center in Shanghai. As Asia's largest and brand's top event in the field of industrial automation, this event brings together the world's leading automation equipment manufacturers.