First of all, the yellow one on the left side of the infrared touch screen is the high-voltage input line. Continue to boost the 220V of the power supply to the top of kilovolts and input it to the LCD panel. The green one on the right is the screen driver board, which is used to drive the LCD panel.
The following is the connection method, find the VGA cable and connect the driver board to the computer and plug it in the opposite direction of the socket. When you find the DC plug, insert the yellow high-voltage wire in the positive direction, and do not insert it in the opposite direction, because inserting it in the opposite direction will burn out the infrared touch screen. Plug the USB port into the computer to ensure the computer's control of the infrared touch screen, so that the line is completed.
Secondly, turn on the computer, then the lower right corner of the computer will appear to be installing a new driver, it is estimated that the installation can be completed in a few minutes, after the installation is completed, open my computer will have a floppy disk called infrared touch screen. Right-click to enter the settings state, click Touch, and the computer will give you a dialog box to complete it. Click on it to set it up and enter your account password. The necessary authorization of the infrared touch screen through the Internet, so that the operation is to improve the security of our infrared touch screen, so that it becomes a standard infrared device, with the drive will make our system bring security factors, simplify the steps when using and improve our connection efficiency.
Finally, it will be difficult for us to perform rapid detection, which means that we need to complete the infrared display detection in less than 0.3 milliseconds. After the detection is completed, open the infrared touch screen and enter the corresponding password characters, for example: rucio-93, etc. The computer will pop up the corresponding dialog box, click OK (at this time, be sure to pay attention to the distance of infrared rays to ensure that the data can be successfully exchanged during the exchange), and at the same time ensure that there is no strong pulse signal around to prevent the impact on the infrared equipment. Here, please rest assured that infrared communication is harmless to the human body, the transmission distance is short, and there is no pollution of space.
|
More on that
|
What is the function of the DIP switch on the back of the touch screen?
There are 2-4 hidden DIP switches on the back of the VIRONT touch screen, and each HMI backplate has a set of reset buttons and DIP switches that can be used to trigger the corresponding function when switching between different modes. The following is a list of categories:
mTV series
cMT-SVR series
If cMT-SVR ...
|
|
The role of the macro on the touch screen
Weilun Tong macro is a programming language for human-computer interface interaction development, which is based on a programming language developed by Microsoft in the early VB, macro provides EBPro application outside of some additional functions you need, macro is widely used, almost PLC control ...
|
|
What are the symptoms of Weiluntong touch screen motherboard failure?
1. The motherboard cannot recognize/display the peripheral devices.
2. The peripherals will stop working for a few seconds or more.
3. A slow boot may indicate that your motherboard is broken, although it could also be other components.
4. The touch screen does not recognize the flash drive, or ...
|
|
A common problem encountered in the use of Weiluntong touch screen - display
3.1 What should I do if the touch screen shows garbled characters?
Select "Oriental Language" in the EB500 software "Options/Language Selection", and then compile it after saving it so that there will be no garbled characters.
3.2 Why can't the following window appear when editing EB500 software, and it is blank?
...
|
|
The touch screen prompts the device to deal with the unresponsiveness
First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the touch screen, and replace them in time if there are cracks. It is also necessary to check the surface of the touch screen for dirt and dirt.
|
|
Weiluntong touch screen - the internal structure of the resistive touch screen
(1) FILM - that is, the film used for touch, the base material is PET. When touched, the ITO of the upper and lower layers is brought into contact by deforming the film, resulting in different "resistance values" in the X and Y axes (similar to the principle of moving rheostats).
Depending on the requirements of use, the table of FILM ...
|
|
Velonton released a new product - cMT-SVRX
Since the launch of the cMT-SVR, the innovative body and screen separation architecture has subverted the market's imagination of HMI. With the continuous cultivation of Weiluntong, this unique detached HMI has gradually gained a foothold in the market and is now widely used in the market.
In order to meet the needs of the new generation of industrial Internet of Things ...
|
|
Weiluntong touch screen - the advantage of capacitive touch screen
1. Novelty of operation
The capacitive touch screen supports multi-touch, making operation more intuitive and fun.
2. It is not easy to be touched by mistake
Because the capacitive touch screen needs to sense the current of the human body, as long as the human body can operate it, there will be no ...
|
|
Weiluntong CMT-IPC15&CMT3151 new product released
cMT3151 can be stored in the form of data streaming, avoiding the SD card or USB when storing data due to falling off and unable to produce a complete storage record; At the same time, the abnormal operation of the machine is recorded, and the user is assisted in tracking and analyzing the source of the problem. cMT-iPC15 Built-in Error Correction Code (ECC) ...
|
|
Weiluntong touch screen - precautions for the use of industrial touch display products
1. The film surface of the touch screen is the touch surface, that is, the front of the product; The glass side is non-touch, i.e. the back of the product
2. The touch screen part is a glass product, the corners of the glass are sharp, please wear gloves/finger sleeves when assembling
3. The touch screen part is a fragile glass product, and it should not be touched during assembly.
|
|
With a machine in hand, the factory takes it away - the app independently developed by Weiluntong
The new cMT-iV6 is a touchscreen with a built-in cMT Viewer that can be connected and monitored to multiple cMT-SVRs or cMT series machines at the same time. The cMT-iV6 is equipped with a 9.7-inch screen with a resolution of 1024×768, a built-in speaker and a high-performance 1GHz processor.
|
|
Introduction and Model of MT (iE) Series (High Performance)
MT(iE) Series (High Performance)
1、MT8102iE
10.1" TFT display 1024*600 dots, brightness 350, contrast ratio 500:1, 16.7M color,
128MB memory, DC19.2-28.8VDC power supply, four-wire resistive,
Ethernet Interface/USB Host...
|
|
Weiluntong touch screen - capacitive touch screen component classification introduction
The types of capacitive touch screens are divided into two types: surface capacitive touch screens and projected capacitive touch screens.
Surface capacitive touch screen
Commonly used is the surface capacitive touch screen, which has a simple working principle, low price, and simple circuit design, but it is difficult to achieve multi-touch.
...
|
|
How to set up the proportional conversion of Weiluntong
1. Connect your Veriton device and open the software to enter the data point configuration page.
2. On the Data Point Configuration page, select the data point that you want to scale.
3. Click the "Settings" button and select "Scale Factor Conversion" in the pop-up window.
4. ...
|
|
Weincloud, bring you a different cloud experience | cMT X series
With the sudden changes in the market environment, the digital transformation of enterprises is imminent. In the process of digital transformation, cloud service integration is an important part. However, the high-level technical threshold and huge construction costs often discourage enterprises.
Therefore, Weiluntong Technology ...
|
|
Velun Tong Touch Screen EBPro Software Knowledge Points (18-24)
18. Macro calculation:
The values to be calculated are read, and then the data is calculated and written to LW0.
19. According to the different selections of the project menu, two different direct windows will pop up with one button:
Macro commands are triggered by a button to read the ...
|
|
Weiluntong touch screen - introduction to the operation skills of touch screen
1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.
|
|
What are the advantages of Weiluntong touch screen - touch all-in-one machine?
1. The touch all-in-one machine can carry out the dynamic display of the three-dimensional model of the object, and has a good interactive experience function. The audience can operate by themselves through the touch all-in-one machine, and "touch" the object at zero distance on the screen, and the audience can also rotate and zoom in arbitrarily on the touch all-in-one screen.
|
|
The advantages of Weilun touch screen touch
Gesture control is like swiping a mobile phone, and industrial products are no longer monotonous and boring
The new cMT X-Series HMI supports touch gestures. Users can swipe, grab and other gestures to operate the interface, and no longer need to use buttons, they can operate functions on the HMI, providing more convenient and more ...
|
|
Velun Tong Touch Screen EBPro Software Knowledge Points(1-17)
1. Background color:
Right-click on the blank space of the window, select Properties, Pop-up Settings, and select a color in the background;
Hatch: In the background, tick the fill, select the pattern color and pattern.
2. Picture/Background Image:
Select Picture Element ...
|
|
Contact
working hours
