Description: E+H/Endershaus thermocouple thermometer TMT162C reliable thermometers designed for safety-critical applications in the oil and gas, chemical and power industries. Multiple certifications and tests to ensure that the thermometer meets the relevant safety requirements. In combination with the use of transmitters, higher accuracy and reliability can be achieved than direct sensor measurements.
Features:
Double-chamber housing
Backlit display with large measured values, bar graphs, and error alarm indications
2 kV galvanic isolation (sensor input and output)
Thermowells with numerous threaded connections are available as standard
The measuring cartridge of the mineral insulating sheath (SS316L/1.4404) construction can be replaced
Hazardous Area Approvals: Flameproof (Ex d), Intrinsically Safe (Ex ia), Non-sparking (Ex nA)
Junction box in cast aluminium or stainless steel, IP67 degree of protection, NEMA 4x
Product parameters
Measuring principle
thermocouple
Features/Applications:
British standard
Modular thermometer
Suitable for heavy dust applications
Can be used in hazardous areas
Threaded process connection
Use with a thermowell
Backlit display
Thermowell
For use with a thermowell
Armoured core/probe
Mineral insulating material (MI), bendable
Outer diameter of the thermowell
6.0 mm (0.24'')
The maximum insertion depth required
up to 30,000.00 mm (1.181.10'')
Thermal protection sleeve material
Not set
Coated is optional
Not set
Process connections
Male Thread:
G1/2"
NPT1/2"
NPT3/4"
M24x1/5"
Thermal protection sleeve end type
Straight tube type
Operating temperature range
Type K:
-40...800 °C
(-40...1.472 °F)
Type J:
-40...750 °C
(-40...1.382 °F)
Maximum process pressure (static pressure)
At 20 °C: 480 bar (6.962 psi)
Measurement accuracy
Cl. 1, according to IEC 60584
Cl. 2, according to IEC 60584
Response time
Depends on the settings
t50 = 3 s
t90 = 7 s
Modular temperature transmitters
Yes (4... 20 mA； HART； PROFIBUS PA； FOUNDATION FIELDBUS）
Explosion-proof certification
ATEX II
ATEX Eex
Explosion protection
certificate
GOST Certification
SIL certified
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action and every detail of the service is professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the E+H/Endershaus differential pressure transmitter Deltabar PMD78B product, if you are interested in E+H/Endershaus digital conductivity sensor, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus casing TA550 insertion depth 5 mm
Introduction: E+H/Endershaus casing TA550, because of the harsh process conditions, the strength of the protective casing must be precisely calculated. Coloring penetration testing, ultrasonic testing, helium leak testing, pressure durability testing, and various non-destructive material tests to prove the quality of materials and processes ...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11961Z
Introduction: E+H/Endershaus Conductive Limit Detection Single Rod Probe 11961Z, 11961Z High Corrosion Resistance Probe Body and Insulation Layer are made of anti-corrosion materials and can be used for corrosive media measurement. The insulation is made of ceramic and can be used in steam boilers.
Features:
Pole...
|
|
E+H/Endershaus Pressure Transmitter Cerabar PMP51B Accuracy 0.075%
Description: E+H/Endershaus The pressure transmitter Cerabar PMP51B is part of the new generation of Cerabar transmitters. The instrumentation offers many advantages, such as convenient on-site or remote operation, as well as on-demand maintenance to prevent unplanned downtime events. ...
|
|
E+H/Endershaus digital ORP electrode Memosens C PF82E with a length of 120 mm
Introduction: E+H/Endershaus Digital ORP Sensors The Memosens CPF82E is a robust digital ORP sensor that reliably measures ORP values under harsh conditions. Stain-resistant PTFE diaphragm, low maintenance workload, built-in mounting bracket, easy to install...
|
|
E+H/Endershaus pH/ORP combination electrode Memosens CPS76D is IP68 rated
Description: E+H/Endershaus Digital pH/ORP Combination Sensor Memosens CPS76D, Memosens CPS76D sensor enables simultaneous pH and ORP measurement in harsh and hygienic applications, improving process control and product quality.
Features:
Same...
|
|
E+H/Endershaus temperature transmitter iTEMP TMT142B
Description: The E+H/Endershaus temperature transmitter iTEMP TMT142B with backlit display delivers reliable, precise and long-term stable measurement results in harsh conditions and hazardous areas. Built-in Bluetooth® interface for safe remote operation
Features:
...
|
|
E+H/Endershaus Sheath TA560 insertion depth 5 mm
Introduction: E+H/Endershaus Sheath TA560, because of the harsh process conditions, the strength of the protective casing must be precisely calculated. Dye penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the quality of materials and processes.
|
|
E+H Proline Prosonic Flow 93T Error +/-2.0 %
Introduction: The E+H/Endershaus ultrasonic flow meter Proline Prosonic Flow 93T is designed for temporary monitoring and test measurements with bundled sensors, eliminating the need for an external power supply and relying on the battery to do the job independently. Prosonic Flow 93 ...
|
|
E+H/Endershaus Hydrostatic Level Measurement Pilot FMX11 Communication 4-20mA
Introduction: E+H/Endershaus Hydrostatic Level Measurement Pilot FMX11, Waterpilot FMX11 transmitter is commonly used for hydrostatic level measurement in environmental applications.
Features:
Simple and reliable transmitter for a wide range of drinking water applications
Easy to install, ...
|
|
E+H/Endershaus Guided wave radar measures travel time principle Levelflex FMP51
Introduction: E+H/Endershaus Guided Wave Radar Measuring Stroke Time Principle Levelflex FMP51, Levelflex FMP51 is suitable for level measurement under extreme conditions in the process industry, such as high temperature and high pressure. Even if the liquid level fluctuates, foams or there is an obstacle in the tank...
|
|
E+H/Endershaus differential pressure transmitter Deltabar PMD75 -40...85 °C
Description: The E+H/Endershaus differential pressure transmitter Deltabar PMD75 with piezoresistive sensor and welded metal film is used in all industries for the continuous measurement of liquids, vapors and gases. The 3-button operation enables simple and reliable commissioning and operation. Integrated HistoROM data module ...
|
|
E+H/Endershaus mass flow meter Proline Promass O 500 liquid ± 0.0005g/cm3
Description: The E+H/Endershaus mass flow meter Proline Promass O 500 is suitable for the oil and gas industry and provides high-precision measurement of liquids and gases at the highest process pressures. The sensor is perfectly suited for offshore conditions and is resistant to stress corrosion fracture. Promass O 500's ...
|
|
E+H/Endershaus Ultrasonic Measurement of Travel Time Principle Prosonic FMU40
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FMU40, Prosonic FMU40 is suitable for non-contact level measurement of liquids, slurries and solid lumps as well as flow measurement in open channels or measuring weirs.
Features:
Four lines of plain text display, ...
|
|
E+H/Endershaus analogue pH electrode Orbipac CPF81 with IP68 degree of protection
Introduction: E+H/Endershaus Analog pH Sensor Orbipac CPF81, the Orbipac CPF81 is an analog sensor that is a simple solution for measurement under harsh operating conditions.
Features:
Suitable for both flow-through and immersion installations
Long-term stability: ...
|
|
E+H Proline Prosonic Flow 93P 1.4308/CF-8
Introduction: The E+H/Endershaus Ultrasonic Flow 93P strap-on sensor is designed specifically for the process industry. Combined with the Prosonic Flow 93 transmitter with touch capability, four-line display, and a wide range of extended functions, the Proson ...
|
|
E+H/Endershaus conductivity sensor Memosens CLS82D
Introduction: E+H/Endershaus conductivity sensor Memosens CLS82D
Features:
Wide measuring range
Hygienic design, EHEDG tested and 3-A certified
Memosens technology with unique electrode connection monitoring ensures circuit safety ...
|
|
E+H/Endershaus modular RTD thermometer TR88
Introduction: The E+H/Endershaus modular RTD thermometer TR88 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, enhancing the measurement compared to directly connected sensors.
|
|
E+H/Endershaus Mass Flow Meter Proline Promass E 300 has a range of –40 to +150°C
Introduction: The E+H/Endershaus mass flow meter Proline Promass E 300 is a robust and cost-effective solution for long-term use for high-precision liquid and gas measurements in a wide range of standard applications in different industries. Used in conjunction with an all-in-one transmitter, the Promass...
|
|
E+H/Endershaus pH electrode Memosens CPS97E degree of protection 68
Description: The E+H/Endershaus pH sensor Memosens CPS97E, Memosens CPS97E pH sensor, without the risk of glass breakage, is particularly suitable for the measurement of media with a high fiber content and solid particle suspensions, such as dispersions, precipitates and emulsions.
Features:
Memose ...
|
|
E+H/Endershaus Radar Level Measurement Micropilot NMR81 Input 4-20mA
Description: E+H/Endershaus Radar Level Measurement Micropilot NMR81, Micropilot NMR81 can be used for metering transfer and inventory control measurements, is NMi and PTB certified and meets the relevant requirements of R85 and API 3.1B standards. NMR81 is particularly suitable for measurements in free space ...
|
|
Contact
working hours
