Description: The E+H/Endershaus pH sensor Memosens CPS97E, Memosens CPS97E pH sensor, without the risk of glass breakage, is particularly suitable for the measurement of media with a high fiber content and solid particle suspensions, such as dispersions, precipitates and emulsions.
Features:
Memosens 2.0 is the perfect basis for implementing predictive maintenance and advancing IIoT technology by allowing for the expansion of memory cells, the storage of calibration and process parameters for better trend identification.
No risk of glass breakage: PEEK shaft is designed to withstand harsh applications and ensure product safety
The open-pore diaphragm meets the requirements for the measurement of heavily contaminated media and prevents the electrodes from clogging.
The chemical stability of the reference gel ensures long-term stability of the measurement results
Low maintenance: ISFET technology is not affected by high temperatures or temperature fluctuations, and long calibration intervals are long
Highest process safety: Thanks to the non-contact, inductive signal transmission, humid and corrosive conditions have no effect on the measurement.
Product parameters
Measuring principle
ISFET electrodes
apply
Unbreakable pH sensors for highly contaminated media:
- Chemical industry - pulp and paper industry - mineral and metal industry
peculiarity
Digital pH electrode for opening pores for clogging media such as suspended solids, dispersions, precipitation reactions
A minimum conductivity of >500μS/cm is required
reference
Stable gel reference system
Measuring range
pH 0 to 14
Measuring principle
Measuring principle
devise
devise
Material
Sensor shaft: Polyetheretherketone
Seal: FFKM
Metal leads: Silver/silver chloride
O-rings: Viton
Process joints: PPS glass fiber reinforced
Nameplate: Ceramic metal oxide
Dimensions
Diameter: 12 mm (0.47 in.)
Shaft lengths: 120, 225, 360 and 425 mm
(4.72, 8.86, 14.2 and 16.7 inches)
Process temperature
-15 to 110 °C (5 to 230 °F)
Process pressure
11 °C
max. 100 bar absolute (max. 5.212 psi at 159 °F)
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action and every detail of the service is professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the E+H/Endershaus digital conductivity sensor Condumax CLS21D product, if you are interested in the E+H/Endershaus digital conductivity sensor, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus temperature transmitter iTEMP® TMT180
Description: The E+H/Endershaus temperature transmitter iTEMP® TMT180 is designed for signal transmission in RTD Pt100 sensors and can be set with different measurement ranges. 4 ... A standard current output signal of 20 mA is used for process measurements. It can be used in all kinds of non-explosion-proof areas, providing ...
|
|
E+H/Endershaus hygienic compact thermometer Easytemp® TMR35
Description: The E+H/Endershaus hygienic compact thermometer Easytemp® TMR35, TMR35 is cost-effective, space-saving, easy to install and commission, reliable in operation, and meets the measurement requirements of the food, beverage and life sciences industries. A wide range of hygienic process connections for maximum flexibility. ...
|
|
E+H/Endershaus ultrasonic level sensor FMU44 temperature sensor
Product Introduction: All-in-one measuring transmitter for non-contact level measurement of liquids, slurries and lumps Pros Menu-based on-site operation with four-line plain text display for quick and easy instrument commissioning in 7 languages Field envelope display for easy instrument failure
|
|
E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU91F
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU91F, FDU91F ultrasonic sensor is suitable for continuous, non-contact level measurement of liquids, slurries, sludges, powders and solid lumps, maintenance-free, and can also be used for flow measurement in open channels and measuring weirs.
|
|
E+H/Endershaus Mass Flow Meter Proline Promass E 500 Measuring Tube 1.4539
Description: The E+H/Endershaus mass flow meter Proline Promass E 500 is a robust and cost-effective solution for long-term use for high-precision liquid and gas measurements in a wide range of standard applications in different industries. In combination with the innovative split transmitter, ...
|
|
E+H/Endershaus pressure transmitter PMC131-A15F1A1S economical
Product Introduction: Pressure Transmitter PMC131-A15F1A1S Economical Pressure Transmitter with Oil-Free Ceramic Sensor to Measure Gas and Liquid Pressure. The Cerabar PMC131 is an attractively priced pressure transmitter with an oil-free capacitive ceramic sensor for absolute and gauge pressure measurements.
|
|
E+H/Endershaus four-channel transmitter Liquiline CM444 IP66 / IP 67
Introduction: E+H/Endershaus four-channel transmitterLiquiline CM444 digital multiparameter measuring transmitter for all types of process monitoring and control. Modular structure, easy to expand. The four-channel controller enables seamless system integration, simple operation, reduced spare parts storage, and time-saving.
|
|
E+H/Endershaus multi-point thermometer iTHERM TMS31 MultiSens
Description: E+H/Endershaus iTHERM TMS31 MultiSens, iTHERM MultiSens TMS31 multi-point thermometer with modular design for average temperature detection and density ladder in storage, oil or fuel tanks for grain, organic bulk material storage.
|
|
E+H/Endershaus TM311 - Pt100 thermometer
Product Introduction: E+H/Endershaus TM311 - Pt100 Thermometer Compact RTD thermometer for accurate and fast measurements, IOLink, suitable for aseptic applications
Advantage:
• Quick installation and easy commissioning: - Solid stainless steel, compact and compact structure - M12 connection, IP69 ...
|
|
E+H/Endershaus hygienic compact thermometer Easytemp® TMR35
Description: The E+H/Endershaus hygienic compact thermometer Easytemp® TMR35, TMR35 is cost-effective, space-saving, easy to install and commission, reliable in operation, and meets the measurement requirements of the food, beverage and life sciences industries. A wide range of hygienic process connections for maximum flexibility. ...
|
|
E+H/Endershaus multipoint thermometer iTHERM TMS02 MultiSens Flex
Introduction: E+H/Endershaus multi-point thermometer iTHERM TMS02 MultiSens Flex, iTHERM TMS02 MultiSens Flex is designed to the highest safety standards and allows customization for different applications.
Features:
The sensor's three-dimensional temperature measurement satisfies ...
|
|
E+H/Endershaus hydrostatic level gauge Deltapilot FMB51 has a turndown ratio of 100:1
Description: E+H/Endershaus Hydrostatic Level Gauge Deltapilot FMB51, Deltapilot FMB51 rod sensor with CONTITE measuring cell with fixed process connection, mainly used in the environmental protection industry, for measuring the level of liquids or slurry media in open or closed containers ...
|
|
E+H/Endershaus Tuning Fork Level Meter FTL20-032E Vibratory Compact
Product introduction: FTL20-032E is an all-in-one limit level detection switch. Typically used in tank farms, vessels and pipelines, in cleaning and filtration systems and cooling and lubrication tanks, for overfill protection or to prevent pumps from running dry. [/backcolor]
Tuning fork level gauge FTL20-032E[/ba ...
|
|
E+H/Endershaus Electronic Vibration Limit Detection FTL825
Introduction: E+H/Endershaus Electronic Vibration Limit Detection FTL825, Nivotester FTL825 directly supplies the Liquiphant fail-safe FTL8x tuning fork level switch via a two-core cable, analyzes the Liquiphant current value (4-20 mA independently), and transmits the switching signal back ...
|
|
E+H/Endershaus Wireless Gateway HART Fieldgate SWG70 20...30VDC
Introduction: The E+H/Endershaus wireless gateway HART Fieldgate SWG70 is used as an interface between systems using Ethernet or RS-485 physical layers and wireless HART networks. The gateway is designed to be installed in Zone 2 Ex applications with intrinsically safe antenna ports. Internal or split antennas can be rooted ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR52
Introduction: E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR52, Micropilot FMR52 uses a flush horn antenna made of integral PTFE material, which has excellent corrosion resistance advantages and is used for level measurement of highly corrosive liquids. The FMR52 sensor passed the ASM...
|
|
E+H/Endershaus chlorine dioxide sensor Memosens CCS50D
Description: E+H/Endershaus chlorine dioxide sensor Memosens CCS50D, Memosens CCS50D chlorine dioxide sensor is robust and low-maintenance. It provides fast and stable measured values for drinking water, process water, and utility applications. Sensors guarantee efficient disinfection ...
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT181
Introduction: The E+H/Endershaus temperature transmitter iTEMP® TMT181, with its excellent reliability, accuracy and long-term stability, can be used in critical processes in all industries, transmitting not only RTD and TC conversion signals, but also resistance and ...
|
|
E+H/Endershaus thermocouple thermometer TEC420
Introduction: The E+H/Endershaus thermocouple thermometer TEC420 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, enhancing the measurement compared to directly connected sensors.
|
|
E+H/Endershaus chlorine measurement transmitter Liquisys CCM253
Description: E+H/Endershaus Chlorine Measurement Transmitter Liquisys CCM253, Liquisys CCM253 is a standard chlorine measurement transmitter and can measure pH to compensate for chlorine measurement.
Features:
Increased operational safety: Continuous process inspection system ...
|
|
Contact
working hours
