All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
In addition, there is a key interlock type with a standard portable key that can realize hostage control, so you can carry the portable key into large equipment to ensure safety.
The actuator is mounted on the safety gate, the safety switch is installed on the mechanical body, and the gate can be automatically locked mechanically.
When the inertial operation of the machine is stopped, the electromagnetic coil is unlocked by an electronic signal from the controller, etc., for greater safety.
This is a resin safety switch with a locking strength of 3000N∗ by strengthening the locking mechanism and actuator.
The actuator insertion port of the main body has been enlarged to improve the ability to cope with the shaking of the door.
The key interlock type is available with 10 keys to choose from, eliminating the need for key swapping between adjacent devices.
There are two directions in which the actuator is inserted.
Double-insulated structure without grounding wire.
∗ Notation is a lock strength value in the horizontal direction (parallel to the panel).
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Hequan HS1E-K Solenoid Safety Switch 3 Circuit Type HS9Z-A1S products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HE3B enabling switch HE9Z-D3B
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DQ7Y4KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5E-KVA0L05-2A501 Safety switch with keylock
VA circuit, key removable in all positions, key 501, 5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We take our customers as the ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-03RNP
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-VF7Y4SM-G Interlock 4 Cnt Solenoid Lock
4 Contacts, 3NC Door, 1NC Lock, Monitoring Circuit, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET-19 ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT44KMSRM-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
Doorknob Actuator Handle Unit, Left Hand Door
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T005
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2A501
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-L7Y4B01-G Safety Switch Solenoid Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20MB
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1; 9.2.5.8 ...
|
|
IDEC/Izumi HS5E-KVA0L05-2B502 Safety switch with keylock
VA circuit, unplug the key in the UNLOCK position, key 502,5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We...
|
|
IDEC/Izumi HS1L type electromagnetic safety switch
Achieve a high level of 3000N locking strength. Suitable for large/heavy doors as well as sturdy doors that require high locking strength.
Key features:
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6 Within the Contacts ...
|
|
IDEC/Izumi HS1T HS1T-VD44ZLM-G solenoid safety switch
IDEC/Izumi HS1T Electromagnetic Safety Switch A high-locking strength solenoid safety switch suitable for large doors and large equipment.
Key features:
Locking strength of 5,000N or more, small size.
Rear locking release mechanical finger that can be confirmed on both the front and side ...
|
|
IDEC/Hequan Safety Interlock HS5L Miniature Lock HS5L-VJ44M-G Safety Interlock Spring Lock
Main features: compact body 35x40x127mm
1400N locking force
Spring or electromagnetic lock type
2 or 4 contact types
Spring-loaded clamp terminals
Gold-plated contacts
Head removal detection circuitry
B10d:2.0E+06
Mechanical Specifications:
Catheter opening M20
Catheter size M20
The main contact ...
|
|
IDEC/Izumi HW Series Rocker Switch SE9Z-CCB3
The position of the incident light is simple and clear, and the optical axis is easy to confirm the accuracy adjustment function.
It is possible to construct efficient and economical safety measures without blind spots.
The temporary neutralization feature enables both safety and productivity.
The stowage restart function makes the production line smooth and safe after the temporary neutralization stop.
|
|
IDEC/Izumi Safety Interlock HS5D Micro HS9Z-LH5KLHS5 Plastic Slide Communicator
IDEC/Izumi Safety Interlock HS5D Micro HS9Z-LH5KLHS5 Plastic Slide Communicator Plastic Slide Handle Actuator for HS5 Series with Key and Rear Lever
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, and the concept of ...
|
|
IDEC/Izumi HS5E-KVA005-2C Safety switch with key lock
VA circuit, key removal at LOCK position, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric service concept: ...
|
|
IDEC/Izumi HS5E-KVD005-2B Safety switch with key lock
VD circuit, key removal for unlock position, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric service concept: ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M200PB
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|