IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSRP-G-T001

Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

IDEC/Izumi HS6B Subminiature HS6B-12B05 Safety Interlock Switch 2NC1NO 2NC 1NO Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Open directly ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VW7Y4ZM-G 4 Contacts 1NO & 3NC, Electromagnetic Lock 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Mechanical Gauge ...

2 Contacts, 1NC Gate, 1NC Monitor, Electromagnetic Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS- ...

The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...

IDEC/Izumi HS6B Subminiature HS6B-03B01 Safety Interlock Switch 3NC 3NC Contact, 1m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action ...

The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XH7Y4ZM-G 2 contacts 2NC, solenoid lock 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Mechanical Specifications: Catheter open ...

IDEC/Izumi Safety Interlock HS6E Submersible Locking HS9Z-A62S Actuator Key Right Angle Type The world's thinnest electromagnetic interlock switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three-sided handsome ...

VA circuit, keys removable in all positions, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Degree of protection IP65 Cable length 3 meters Our customer-centric service concept: the pursuit of a full range of services is a kind of high-quality, ...

The dimensions are 35×40×146mm. This is a backside lock release button type that can be used for emergency evacuation, etc. A back-locking release button unit that can be mounted on an aluminum frame is also available. 4. The independent circuit type and the safety circuit are dualized, so that the circuit variety is more complete. , which can cope with small loads ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-SH5 Sliding Actuator Key features: Slide actuator Product Category Cables & Accessories The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hoping to cooperate with the society.

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.