IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC79110

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 1NC+1NO Functional Specifications: Detection distance ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs. IP67 (IEC60529) protection structure is used for the contact parts. The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking Limit Switches 5000N INTLOCK SW 2CON SPR – HS1T-XH7Y4ZSM-G 2 contacts 2NC, solenoid lock, side conduit 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA screw ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

VA circuit, key removable in all positions, 3m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric ...

Key features: 2 contacts 2NC, spring lock 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Mechanical Specifications: Catheter opening M20 Catheter size M20 Main contact person 2 ...

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VB44ZLM-G 4 contacts 1NC, 1NO and 2NC, spring lock, rear unlock button 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Provide electromagnetic locks and pop ...

IDEC/Izumi HS6B Subminiature HS6B-02B01 Safety Interlock Switch 2NC Contact, 1m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action: even if ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

Lightweight design with excellent grip. The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...