Description: E+H/Endershaus Digital free bromine sensor Memosens CCS55D, Memosens CCS55D is a low-maintenance digital free bromine sensor. It reliably measures in desalination plants, process water, cooling water, swimming pools and fisheries, and outputs stable measured values. Even when the amount of water is low, free bromine sensors are safe to disinfect. Rapid response and efficient process control. The CCS55D is equipped with Memosens digital technology for maximum process and data integrity and is easy to operate.
Features:
Different sensor models are used for different applications: from trace measurements to free bromine concentrations up to 200 mg/l.
Fast response (T90 < 20 seconds) with high-precision display of process status, enabling timely measures to respond to process changes and efficient process control. Remains active in brominated-free media and measures as soon as bromine is present.
Increased process safety: Precise measurements, high long-term stability, permanent process monitoring, and flexible adjustment of the disinfectant dosage as required.
Safe seawater disinfection because the addition of chlorine to seawater forms bromine compounds. Monitoring chlorine concentrations can cause measurement errors, resulting in poor disinfection results.
Sensors can be replaced quickly and easily, with longer trouble-free uptime: Sensors can be pre-calibrated in the laboratory and plug-and-play in the field.
In combination with the Liquiline multiparameter transmitter, it is possible to simultaneously measure other relevant water analysis parameters, such as pH and ORP.
Product parameters
Measuring principle
Free bromine
apply
Seawater - ensures reliable disinfection
Process water - large measuring range and wide range of applications
Pool Water - Accurate Measurement, Effective Metering
peculiarity
Amperometric measurement of dissolved free bromine
Measuring range
Traces: 0 ... 5 mg/l HOBr
Standard: 0 ... 20 mg/l HOBr
High: 0 ... 200 mg/l HOBr
Measuring principle
Closed membrane-covered measuring cell
Reduction of free bromine at the working electrode
devise
Enclosed, galvanic 2-electrode measuring cell with PET film
Material
Sensor Axis: POM
Film: PET
Film cap: PVDF
Dimensions
Diameter: 25 mm (0.98 in)
Length: 161 mm (6.34 inches)
Process temperature
+0...55 °C (32 ... 130°F), no icing
Process pressure
Maximum. 1 bar (14.5 psi max)
Temperature sensor
10k NTC integration (Memosens)
connect
Inductive digital connectors with Memosens technology
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus digital conductivity sensor Condumax CLS16D product, if you are interested in E+H/Endershaus digital conductivity sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus temperature transmitter iTEMP® TMT181
Introduction: The E+H/Endershaus temperature transmitter iTEMP® TMT181, with its excellent reliability, accuracy and long-term stability, can be used in critical processes in all industries, transmitting not only RTD and TC conversion signals, but also resistance and ...
|
|
The E+H/Endershaus compact thermometer Easytemp® TMR31 complies with IEC 60751
Description: The E+H/Endershaus compact thermometer Easytemp® TMR31, TMR31 is cost-effective, space-saving, easy to install and commission, reliable in operation and meets the requirements of modern measurement technology. The built-in anti-vibration film sensor guarantees the fastest response time and the most safe work.
|
|
E+H/Endershaus digital ORP electrode CPS42D is IP68 rated
Introduction: The E+H/Endershaus digital ORP sensor CPS42D, Ceraliquid CPS42D is a high-performance ORP electrode for strong chemical corrosive applications, as well as for the measurement of low conductivity media or high concentrations of organic solvents.
Features:
Filled with KCl salt bridge electrolysis ...
|
|
E+H/Endershaus Liquiphant FTL33 vibrating limit level detection
Description: E+H/Endershaus Vibrating Limit Detection Liquiphant FTL33, Liquiphant FTL33 Liquid Limit Switches are specially designed for the hygienic food and beverage industry. Liquiphant is particularly suitable for overflow protection or pump idling in storage tanks, mixing tanks and pipelines
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT180
Description: The E+H/Endershaus temperature transmitter iTEMP® TMT180 is designed for signal transmission in RTD Pt100 sensors and can be set with different measurement ranges. 4 ... A standard current output signal of 20 mA is used for process measurements. It can be used in all kinds of non-explosion-proof areas, providing ...
|
|
E+H/Endershaus differential pressure transmitter Deltabar PMD75 -40...85 °C
Description: The E+H/Endershaus differential pressure transmitter Deltabar PMD75 with piezoresistive sensor and welded metal film is used in all industries for the continuous measurement of liquids, vapors and gases. The 3-button operation enables simple and reliable commissioning and operation. Integrated HistoROM data module ...
|
|
E+H/Endershaus Thermophant® T TTR31 range -50 – 150°C
Introduction: E+H/Endershaus Thermophant® T TTR31, modern process measurement technology needs to have the advantages of cost-effective, space-saving, reliable operation, easy installation and commissioning, this temperature switch fully meets these requirements, suitable for the safety of process temperatures.
|
|
E+H/Endershaus Vortex Flow Meter Proline Prowirl D 200 Measuring Tube 1.4408
Introduction: The E+H/Endershaus vortex flow meter Proline Prowirl D 200 can be installed directly between the flanges and is therefore a functional device for auxiliary process applications with low installation costs. The Prowirl D 200 uses true loop-powered technology to seamlessly integrate ...
|
|
E+H/Endershaus batch controller RA33 IP65 protection
Introduction: E+H/Endershaus Batch Controller RA33, the RA33 batch controller is suitable for recording flow, outputting signals to control valves and pumps, and ensuring accurate dosing of preset batches. The measured volume can be temperature/density compensated. Optimization with automatic or fixed post-run correction ...
|
|
E+H/Endershaus Radar Measurement Micropilot FMR60 Measurement accuracy +/-1mm
Introduction: E+H/Endershaus radar measures the Micropilot FMR60, the first 80 GHz radar designed by Endress+Hauser to comply with the IEC 61508 international functional safety standard.
Features:
Hardware and software designed in accordance with IEC 61508 ...
|
|
E+H/Endershaus differential pressure transmitter Deltabar FMD77 Range: 100 mbar – 16 bar
Description: E+H/Endershaus differential pressure transmitter Deltabar FMD77 with metal sensor, single flange diaphragm seal, or double flange seal, with capillary tube on the low pressure side. It is mainly used for continuous level measurement in the process industry. Built-in HistoROM data module for convenient processes and equipment ...
|
|
E+H/Endershaus Protective Sleeve for Temperature Sensor TA540 Insertion depth 4 mm
Introduction: E+H/Endershaus Temperature Sensor Protective Sleeve TA540, the device is a metal protective sleeve connected using a threaded or flange welding process. The thermometer connection uses NPT female threads, and a variety of flanges of common standards and materials are also available. In heavy-duty applications, the safety ...
|
|
E+H/Endershaus analogue total chlorine sensor CCS120
Introduction: E+H/Endershaus Analog Total Chlorine Sensor CCS120, CCS120 Analog Sensor for Standard Measurement of Total Chlorine. Even in the event of flow or conductivity fluctuations, reliable measured values are transmitted, the disinfection loop is controlled, and the water is free of bacteria. At the same time, sensor calibration and ...
|
|
E+H/Endershaus Thermal Mass Flow Meter Proline t-mass I 300 is IP66/67 rated
Introduction: E+H/Endershaus Thermal Mass Flow Meter Proline t-mass I 300, t-mass I uses a patented sensor design and is inserted into the pipe for mass flow measurement based on the thermal principle with ultra-high measurement stability.
Features:
Flexible settings, ...
|
|
E+H/Endershaus Gauge Transmitter Ceraphant PTC31B Voltage 10 – 0 VDC
Introduction: E+H/Endershaus Gauge Pressure Transmitter Ceraphant PTC31B is a cost-effective pressure switch with ceramic diaphragm sensor; The sensors are vacuum-resistant and enable safe measurement and monitoring of absolute and gauge pressures. The pressure switch is compact, with high stability, high vacuum resistance, and the lowest ...
|
|
E+H/Endershaus tuning fork level switch Liquiphant FTL51
Description: E+H/Endershaus Tuning Fork Level Switch Liquiphant FTL51, Liquiphant FTL51 Tuning Fork Limit Detection Switch with extension tube, can be used in explosion hazard areas, has various international approvals, and is suitable for all industries.
Features:
Can be used for functional ...
|
|
E+H/Endershaus analogue pH electrode Ceragel CPS71 is IP68 rated
Description: E+H/Endershaus analogue pH sensor Ceragel CPS71, Ceragel CPS71 is an analogue electrode designed for pH measurement in sterile and hygienic applications. Its contamination-resistant gel ensures stable measurements in flowing media or low conductivity media. The electrodes can be ...
|
|
E+H/Endershaus Conductive Limit Detection Nivotester FTW325
Introduction: E+H/Endershaus Conductive Limit Detection Nivotester FTW325, Nivotester FTW325 Limit Detection Switch adopts intrinsically safe signal loop and can be connected to conductive sensors. The compact housing makes it easy to install on a standard DIN rail in the instrument cabinet.
Features:
...
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass F 300
Description: E+H/Endershaus Thermal mass flow meter Proline t-mass F 300, t-mass F with patented sensor design for in-line mass flow measurement based on the thermal mass principle with high measurement stability. It effectively compensates for changes in process conditions in real time: temperature ...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11371 Process Pressure Vacuum 10 bar
Introduction: E+H/Endershaus Conductive Limit Detection Single-rod Probe 11371, 11371 probe is used for limit detection of food liquids, such as milk, beer, juice, etc.
Features:
Rod probes are made of corrosion-resistant insulating material (can be used for measuring corrosive media in the same way).
|
|
Contact
working hours
