Description: E+H/Endershaus Digital dissolved oxygen sensor Memosens COS81D, Memosens COS81D dissolved oxygen sensor is ideal for hygienic applications, such as fermentation processes and inert protection against oxidation processes. The COS81D sensor outputs high-precision measurement results stably for a long time, and is equipped with an uninterrupted self-monitoring function to ensure that the measurement process is always reliable, ensure that the user's product quality is qualified, and achieve yield optimization.
Features:
Hygienic design meets EHEDG and ASME BPE standards, including USP Cl. VI and FDA compliance, avoids cross-contamination, and meets GMP and GLP requirements.
The sensors can be installed in the process and used in fermenters. From the first laboratory trials to series production and laboratory applications, the results are consistent and consistent.
Sensors can be replaced in just a few seconds with maximum process times: Sensors are pre-calibrated in the laboratory and existing sensors can be replaced directly for plug and play. No polarization time is required and it is put into use immediately after installation.
The built-in reference LED light source compensates for the aging of the measured LED light source to ensure that the measured value of the entire production batch is reliable.
Reduced maintenance: Memosens COS81D does not need to be filled with electrolyte and does not require the use of sensitive laminations. Sensor calibration is performed only after the fluorescent cap needs to be replaced.
Important sensor parameters and process data are stored in the Memosens COS81D sensor head. Throughout the sensor's lifetime, the Memobase Plus CYZ71D sensor management software archives all stored parameters, providing fully traceable documentation and minimizing paperwork.
Suitable for CIP/SIP cleaning and autoclaving, hazardous area approved.
Product parameters
Measuring principle
Optical oxygen measurement
apply
Enzyme production process control
Natural growth control
Biotechnology production
Food industry
General process applications
Installation
Standard process connection Pg 13.5
Fitted in a standard pH stand
peculiarity
Digital optical (fluorescence) dissolved oxygen measurement.
The medium does not need to flow and the measurement can be measured in still water.
Measuring range
0.004...30 mg/L
0.05...330 %SAT
0.1...700 hPa
Measuring principle
Oxygen-sensitive molecules (markers) are integrated in an optically active layer (fluorescent layer). Liquid wetting on the surface of the fluorescent layer. The sensor optics lie directly below the phosphor layer. The sensor optics emit a green pulse signal to the phosphor layer. The marker body excites crimson fluorescence. The duration and intensity of the response signal directly depend on the oxygen concentration and partial pressure of oxygen.
devise
Optics, 12mm, stainless steel
Material
Sensor body: Stainless steel
Process seals: FKM (USP<87>, <88> Cl. VI and FDA)
Seals/O-rings: EPDM, FFKM (USP<87>, <88> Cl. VI and FDA)
Dimensions
Diameter: 12 mm (0.46 inch) ; Sensor stem lengths: 120, 225, 360 and 420 mm
4.72, 8.86, 14.2, and 16.5inch)
Process temperature
-5...140°C
23...280°F
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus digital dissolved oxygen sensor Memosens COS81D product, if you are interested in E+H/Endershaus digital dissolved oxygen sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Mass Flow Meter Proline Promass P 500 Measuring Tube 316L
Description: The E+H/Endershaus mass flow meter Proline Promass P 500 is a specialist in aseptic processes in the life sciences and is specifically designed for biotechnology applications that require the highest compliance. The Promass P 500 is equipped with an innovative split transmitter that maximizes the use of demanding ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR52
Introduction: E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR52, Micropilot FMR52 uses a flush horn antenna made of integral PTFE material, which has excellent corrosion resistance advantages and is used for level measurement of highly corrosive liquids. The FMR52 sensor passed the ASM...
|
|
E+H/Endershaus digital dissolved oxygen sensor Oxymax COS51D with a diameter of 40 mm
Introduction: E+H/Endershaus digital dissolved oxygen sensor Oxymax COS51D, Oxymax COS51D is a reliable, high-precision dissolved oxygen sensor for a wide range of water and wastewater applications (can be used in hazardous areas).
Features:
Highest measurement accuracy
...
|
|
E+H/Endershaus field temperature transmitter iTEMP® TMT142
Introduction: The E+H/Endershaus field temperature transmitter iTEMP® TMT142 demonstrates unmatched reliability, precision and long-term stability in critical process applications across all industries. The configurable temperature transmitter not only transmits the conversion signal from the RTD sensor and thermocouple, ...
|
|
E+H/Endershaus Capacitive Level Measurement Liquicap FMI21
Introduction: E+H/Endershaus Capacitive Level Measurement Liquicap FMI21, Liquicap FMI21 rod probe is suitable for continuous measurement of conductive liquid level, simple and economical. The probe is made of high-quality anti-corrosion materials such as carbon fiber and stainless steel, which can be used for corrosive liquids ( ...
|
|
E+H/Endershaus Mass Flow Meter LPGmass D8EB Liquid Mass Error±0.20%
Introduction: The E+H/Endershaus mass flow meter LPGmass D8EB is designed for LPG flow measurement in dispensing and truck loading. With intelligent changeover, it is possible to take temperature measurements at the same time, and volume correction can be carried out directly on site. LPGmass is a leading provider of system integrators, skid-mounted manufacturers and designers.
|
|
E+H/Endershaus Electronic Vibration Limit Detection FTM20 Ambient temperature -40-70°C
Introduction: E+H/Endershaus Electronic Vibrating Limit Detection FTM20, Soliphant FTM20 Tuning Fork Limit Detection Switch for non-flowing solid fines and coarse materials. The versatile design is versatile and has been certified for dust explosion-proof applications.
Features:
No proofreading required...
|
|
E+H/Endershaus pH electrode Memosens CPS91E is IP68 rated
Description: E+H/Endershaus pH electrode Memosens CPS91E, Memosens CPS91E with Memosens 2.0 digital technology supports extended data storage, service predictive maintenance and IIoT IIoT.
Features:
Reliable measurement of heavily contaminated media: open-hole ...
|
|
E+H/Endershaus Sheath TWF11 insertion depth 1.5 mm
Introduction: E+H/Endershaus sheath tube TWF11, extremely high temperature process measuring points require a special ceramic sheath. The sheath made of special materials protects the sensor from mechanical and chemical damage during use and prolongs its service life. As a result: savings in measurement ...
|
|
E+H/Endershaus Electronic differential pressure transmitter Deltabar FMD72 process pressure 160 bar
Description: E+H/Endershaus Electronic differential pressure transmitter Deltabar FMD72 electronic differential pressure measuring system is used to measure the pressure, level, volume or mass of liquids in pressure vessels or distillation columns/evaporators. The high-pressure side sensor (HP) measures the hydrostatic pressure of the liquid, and the low-pressure side sensor (LP) ...
|
|
E+H/Endershaus radar measurement Micropilot FMR62
Introduction: E+H/Endershaus radar measurement Micropilot FMR62, the first 80 GHz level radar designed to comply with the IEC 61508 international functional safety standard.
Features:
The hardware and software are designed in accordance with the IEC 61508 standard, and the redundancy ...
|
|
E+H/Endershaus Electromagnetic flowmeter Picomag max. 750 l/min
Introduction: The E+H/Endershaus electromagnetic flowmeter Picomag is widely used in the measurement of conductive liquids in all industries. Picomag's small size and flexible installation make it popular with end users, skid builders, equipment manufacturers and system integrators. It features an advanced and intuitive SmartB...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass F 300
Description: The E+H/Endershaus mass flow meter Proline Promass F 300 is a proven, high-precision sensor. It is not affected by fluctuations and harsh environments, and is widely used. In combination with an all-in-one transmitter, the Promass F 300 is flexible in operation and easy to integrate into the system: operation and ...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11375Z
Introduction: E+H/Endershaus Conductivity Limit Detection Single Pole Probe 11375Z, 11375Z Economical Probe can be used for limit level detection of a wide range of liquids in process and storage tanks.
Features:
For the measurement of high-temperature liquids (e.g. 100°C), a cooler is available
Probe lengths can be ...
|
|
E+H/Endershaus digital dissolved oxygen sensor Memosens COS22E with IP68 degree of protection
Description: The E+H/Endershaus digital dissolved oxygen sensor Memosens COS22E, Memosens COS22E is fully FDA and USP compliant and suitable for aseptic and hygienic applications.
Features:
Low maintenance: Modular sensor design for fast and ...
|
|
E+H/Endershaus Tuning Fork Limit Detection Liquiphant FTL80 Power Supply 4-20mA
Introduction: E+H/Endershaus Tuning Fork Limit Detection Liquiphant FTL80, Liquiphant FTL80 Tuning Fork Limit Switch can be used in explosion hazard areas, has passed multiple international certifications, with fail-safe, over-over-protection function, functional safety level up to SIL3, reliable measurement, not subject to ...
|
|
E+H/Endershaus Ultrasonic Flow Meter Proline Prosonic Flow 92F
Description: The E+H/Endershaus Ultrasonic Flow Meter Proline Prosonic Flow 92F is a duct sensor with a robust and reliable industrial design and is an ultrasonic flow meter. Combined with the loop-powered Prosonic Flow 92 transmitter, it offers high accuracy, low price, and ...
|
|
E+H/Endershaus sheath tube iTHERM TT411 insertion depth 4000 mm
Introduction: The E+H/Endershaus sheathed tube iTHERM TT411 is ideal for hygienic or sterile pipes, vessels or tanks with very small immersion depths. It meets the requirements of the thermometer in terms of physical and chemical influences that need to be strengthened protection, is the replacement of working elements in the closed process, requires routine ...
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT85
Introduction: The E+H/Endershaus temperature transmitter iTEMP® TMT85, with its excellent reliability, accuracy and long-term stability, can be used in critical processes in all industries, not only for the transmission of RTD and TC digital conversion signals, but also for the use of FF...
|
|
E+H/Endershaus radar measures travel time principle Micropilot FMR56 with a measurement accuracy of 3 mm
Introduction: E+H/Endershaus Radar Measurement Journey Time Principle Micropilot FMR56, Micropilot FMR56 is designed for level measurement in light conditions such as bulk bins or containers. Micropilot is suitable for continuous, non-contact use of solid bulk materials such as powders and granules.
|
|
Contact
working hours
