CHINT/CHINT NSC1 Series Motion Controller NSC1-D8T

NH3-100 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated voltage to 230V or 400V, rated current to 100A in the resistance and inductance mixed circuit, mainly for no load to turn on or off the circuit, for the line and power supply to turn on or isolate. Especially suitable for line ...

●The new NXC series AC contactor has a novel appearance and compact structure. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. ●Conform to the standard: GB/T 14048.1/IEC 60 ...

TC is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage to 600V, and rated current to 600A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Standards: ...

CHINT Xinrui NB5LE series terminal power distribution products are suitable for AC 50Hz, rated voltage 230V/400V, rated current to 125A in commercial buildings, residential buildings, industrial equipment and similar places of power line facilities and electrical equipment, with overload protection, short circuit protection, residual ...

NB1Z-63 AC and DC miniature circuit breaker is suitable for AC 50/60Hz rated voltage 230/400V, rated current to 63A line, or DC voltage 220V, rated DC current to 63A line for overload and short circuit protection, under normal circumstances, as the line for infrequent operation and conversion ...

NXAF series universal circuit breaker is suitable for AC 50/60Hz, rated working voltage to AC690V, rated working current to 4000A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single-phase grounding and other faults; The break ...

JCUK series is suitable for wire connection in circuits with AC 50Hz or 60Hz, rated voltage to 1000V and rated cross-sectional area to 150mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces the CHINT/CHINT Terminal Blocks - ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

The new NXC series of AC contactors is an innovative and compact design. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. ●Conform to the standard: GB/T 14048.1/IEC 6094 ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

ND1 series signal lamps are suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines of AC 50Hz (or 60Hz) 380V and below, DC 380V and below. Conform to the standard: GB/T 14048.5. This article introduces CHINT/CHINT ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

NP8 series button is suitable for AC 50Hz (60Hz), rated working voltage 415V and below or DC rated working voltage 250V and below in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for ...

The Ex9PL series indicator and buzzer board has a front height of 8mm, a curved surface design, and indicators of various voltage levels to meet various applications. The light-emitting module adopts LED, which has high brightness, low energy consumption and long life. The lamp head protection grade is IP65, which is suitable for harsh environments. The buzzer has a continuous ...

The AX-5 auxiliary contact is suitable for AC 50Hz, the agreed heating current to 6A, the rated voltage to 415V or the DC rated voltage to 130V, and it is assembled with the NL1 residual current action circuit breaker for the signal indication of the long-distance circuit breaker. Conform to the standard: GB/T 14048.5, ...

NH3-63 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated voltage 230V, rated current to 63A resistance circuit, mainly for no load to turn on or off the circuit, for the line and power supply to be connected or isolated. It is especially suitable for effective isolation of power supply during line maintenance ...

ND16 series signal light is suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines with an AC 50Hz (or 60Hz), rated voltage of 400V and below or DC working voltage of 400V and below. Conform to the standard: GB/T 14048.5. Root...

The S9 shunt trip device (hereinafter referred to as the tripper) is mainly used for matching with NB1 or NBH8 series circuit breakers, and is suitable for long-distance shunt tripping operation in lines with AC 50Hz (or 60Hz) rated voltage to 400V. Meets the standard: IEC60947-5-1, obtained CE certification. 3.1 Basic ...