Introduction: E+H/Endershaus Electronic Vibration Limit Measurement Liquiphant FTL51C, Liquiphant FTL51C Tuning Fork Limit Detection Switch, with strong corrosion-resistant coating and extension tube, can be used in explosion hazard areas, has obtained various international certifications, suitable for all industries. The FTL51 has a functional safety level of SIL2/SIL3 and a second line of protection that ensures the highest level of safety and availability of the device. The measured values are stable and unaffected by flow, turbulence, bubbles, foam, vibrations, solids content or adhesion.
Features:
Can be used for safety systems requiring functional safety up to SIL2/SIL3 in accordance with IEC 61508/IEC 61511-1
A wide range of corrosion-resistant coatings are available to optimally adapt to the process requirements
Equipped with a variety of electronic plug-in types, such as NAMUR, relays, semiconductor thyristors, PFM signal outputs, it enables the connection to the individual process control systems
The PROFIBUS PA communication protocol is also available
No calibration required: Quick and cost-effective device opening mode
No mechanical moving parts, no maintenance, no wear and tear, long service life. Fork body damage can be monitored to ensure proper function
FDA Approved Material (PFA Edlon)
Product parameters
Measuring principle
Liquid tuning fork
Features/Applications:
Strong resistance to corrosive media with antistatic coating
Modular housing
Multiple process connections
Analog and bus interfaces
Multiple certificates (e.g. explosion-proof, WHG)
Extension tube up to 3m (6m, optional)
peculiarity
Foam detection
Detect density changes
The second layer of protection
Ambient temperature
-50...+70 °C
(-58...+158 °F)
Process temperature
-50...+150°C
(-58...+302°F)
Up to 230°C / 450°F (special selection)
Process pressure (absolute)/maximum overpressure limit
Vacuum... 40 bar
(Vacuum...) 580 psi)
Minimum media density
0.5g/cm³ (optional 0.4g/cm³)
The main wetted parts
ECTFE
PFA (Edlon)
PFA (Rubyred)
PFA (Electrically Conductive)
Enamel
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus Electronic Vibration Limit Measurement Liquiphant FTL51C product, if you are interested in E+H/Endershaus Electronic Vibration Limit Measurement, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus digital ORP electrode Memosens CPS12E with IP68 degree of protection
Description: E+H/Endershaus Digital ORP Electrode Memosens CPS12E, Memosens CPS12E is an all-rounder digital ORP electrode. Reliable measurement in harsh conditions or in hazardous locations.
Features:
Rugged and low-maintenance ORP electrodes: large ...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11375Z
Introduction: E+H/Endershaus Conductivity Limit Detection Single Pole Probe 11375Z, 11375Z Economical Probe can be used for limit level detection of a wide range of liquids in process and storage tanks.
Features:
For the measurement of high-temperature liquids (e.g. 100°C), a cooler is available
Probe lengths can be ...
|
|
E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FMU30 Communication 4... 20mA
Description: E+H/Endershaus Ultrasonic Measuring Stroke Time Principle Prosonic FMU30 for applications in wastewater treatment plants, process water storage tank loading, and level monitoring in storage and buffer tanks. FMU30 provides mature software algorithms, four lines of plain text display of reminders and alarm messages...
|
|
E+H/Endershaus Universal Dissolved Oxygen Measurement Transmitter Liquisys COM223
Introduction: E+H/Endershaus Universal Dissolved Oxygen Measuring Transmitter Liquisys COM223, the Liquisys COM223 standard transmitter can be used with the COS41 and COS61 dissolved oxygen measurement sensors.
Features:
Increased operational safety: Continuous process checks ...
|
|
E+H/Endershaus Temperature Transmitter iTEMP® TMT80 Auxiliary Power Supply 8 – 35VDC
Description: E+H/Endershaus temperature transmitter iTEMP® TMT80, a programmable temperature transmitter for RTD and thermocouple sensors. The linearization characteristics of various sensors are stored in the transmitter to ensure the highest level of measurement accuracy. 4 - 20 mA standard current output signal ...
|
|
The E+H/Endershaus PAH sensor CFS51 is IP68 rated
Introduction: E+H/Endershaus PAH sensor CFS51, the robust and low-maintenance Memosens CFS51 fluorescence sensor measures polycyclic aromatic hydrocarbons (PAHs) according to MEPC.259(68) and MEPC.340(77) standards.
Features:
Unique...
|
|
E+H/Endershaus Thermal Mass Flow Meter Proline t-mass A 150
Description: The E+H/Endershaus thermal mass flow meter Proline t-mass A 150 is designed for cost-effective measurement and simple monitoring of commonly used gases, especially in compressed air. It is the trend in sub-metrology applications, with a rugged one-piece aluminum alloy housing that uses four-wire technology ...
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT187
Description: The E+H/Endershaus temperature transmitter iTEMP® TMT187 is designed for signal transmission of the RTD Pt100 over a fixed measuring range. 4 ... A standard current output signal of 20 mA is used for process measurements. It can be used in all kinds of industrial fields, providing fast, convenient and ...
|
|
E+H/Endershaus Ultrasonic Measurement of Travel Time Principle Prosonic FDU93
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU93, the FDU93 ultrasonic sensor is suitable for continuous, non-contact level measurement of liquids, slurries, sludges, powders and solid lumps, maintenance-free, and can also be used for flow measurement in open channels and measuring weirs ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR54
Introduction:E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR54, Micropilot FMR54 is mainly used for liquid level measurement in high temperature and high pressure occasions, and its specially designed flat panel antenna is especially suitable for liquid level measurement with waveguide installation.
Features:
...
|
|
E+H/Endershaus Electromagnetic flowmeter Proline Promag W 800 0—+80 °C
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag W 800 is ideal for off-grid applications in the water industry, both for direct buried and underwater measurements. The Promag 800 (Basic) is equipped with all the basic features, while the Promag 800 ( ...
|
|
E+H/Endershaus Bar Protector TA566 Insertion depth 900 mm
Introduction: E+H/Endershaus Bar Protective Sleeve TA566 Because of the harsh process conditions, the strength of the protective sleeve must be precisely calculated. Dyeing penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the material and workmanship.
|
|
E+H/Endershaus Digital ORP Electrode Memosens CPS72E
Description: E+H/Endershaus digital ORP electrodes Memosens CPS72E, Memosens CPS72E digital ORP electrodes are particularly suitable for demanding applications. The built-in unique anti-fouling reference system reliably measures heavily contaminated and low conductivity media.
Product Features ...
|
|
E+H Proline Prosonic Flow 93P 1.4308/CF-8
Introduction: The E+H/Endershaus Ultrasonic Flow 93P strap-on sensor is designed specifically for the process industry. Combined with the Prosonic Flow 93 transmitter with touch capability, four-line display, and a wide range of extended functions, the Proson ...
|
|
E+H/Endershaus transmitter Liquisys CLM223 is IP65 rated
Introduction: E+H/Endershaus transmitter Liquisys CLM223, Liquisys CLM223 is a standard transmitter for all analog conductivity measurement sensors.
Features:
Increased operational safety: continuous process check system, customized alarm settings...
|
|
E+H/Endershaus Tuning Fork Level Meter FTL20-0220 Limit Level Detection Switch
Product introduction: FTL20-0220 is an all-in-one limit detection switch. Typically used in tank farms, vessels and pipelines, in cleaning and filtration systems and cooling and lubrication tanks, for overfill protection or to prevent pumps from running dry.
Tuning fork level meter FTL20-002B
...
|
|
E+H/Endershaus High Temperature Thermocouple Thermometer TAF12T
Introduction: E+H/Endershaus High-temperature thermocouple thermometer TAF12T, the measuring point with extremely high process temperatures requires the thermometer to be equipped with a ceramic sheath tube and a thermocouple made of special metals such as platinum and rhodium.
Features:
The sheath is made of innovative materials for increased durability and ...
|
|
E+H/Endershaus temperature transmitter iTEMP TMT142B
Description: The E+H/Endershaus temperature transmitter iTEMP TMT142B with backlit display delivers reliable, precise and long-term stable measurement results in harsh conditions and hazardous areas. Built-in Bluetooth® interface for safe remote operation
Features:
...
|
|
E+H/Endershaus mass flow meter Proline Promass I 500 2 titanium class connection
Introduction: The E+H/Endershaus mass flow meter Proline Promass I 500 combines mass flow, density, temperature, and in-line viscosity measurement with a straight single tube design. The Promass I 500 is equipped with an innovative split transmitter that maximizes the use of demanding rings.
|
|
E+H/Endershaus digital conductivity sensor Memosens CLS16E with IP68 degree of protection
Description: E+H/Endershaus Digital conductivity sensor Memosens CLS16E, Memosens CLS16E is a high-end conductivity sensor with FDA and USP Cl. VI hygienic approvals and reliable output of high-precision measured values that help to optimize processes and improve product quality.
...
|
|
Contact
working hours
