NKB8-32 is mainly used in AC 50Hz, rated voltage to 690V, current from 0.16A to 32A power system, can turn on, carry and break the current under normal conditions, including the specified operating overload conditions, and can turn on, carry and break the current under the specified abnormal conditions, such as short-circuit current.
Functional modules or accessories can be selected according to the needs to realize the control and protection of the general (infrequent starting) motor load and frequently started motor load. It is suitable for factories, coal mines, petrochemicals, smelting, ports, railways and civil buildings.
This product complies with the standard: GB 14048.1-2012 "Low-voltage switchgear and control equipment - Part 1: General provisions", GB 14048.9-2008 "Low-voltage switchgear and control equipment - Part 6-2: Multi-functional electrical appliances (equipment) Control and protection switchgear (equipment)
（CPS）》。
At the same time, the relevant accessories meet the requirements of GB 14048.5-2008 "Low-voltage switchgear and control equipment - Part 5-1 control circuit electrical appliances and switching components electromechanical control circuit electrical appliances", GB14048.3-2008 "Low-voltage switchgear and control equipment - Part 3: Switches, isolators, isolation switches and fuse combination appliances" and other standards.
This article introduces CHINT/CHINT NKB8-32 series control and protection switch electrical products interested, also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
CHINT/CHINT soft starter NJR2-D series rated insulation voltage 660V
Introduction: NJR2-D series soft starter is based on advanced dual CPU control technology as the core, controls the thyristor module, realizes the soft start and soft stop functions of the three-phase AC asynchronous motor, and has the functions of overload, input phase loss, output phase loss, load short circuit, starting current limiting timeout, overvoltage, ...
|
|
CHINT/CHINT uninterruptible power supply HP-UPS series charging current 1A
Introduction: HP-UPS series online uninterruptible power supply is a high-frequency single-in, single-output online UPS model. Each capacity model is available in both standard and long-life models, with a wide range of applications, making it ideal for small space environments such as offices and computer rooms. It can be used for small data centers, storage, network ...
|
|
CHINT/CHINT Terminal Appliances —NU6-III Series Surge Protector
NU6-III series surge protector (hereinafter referred to as surge protector) is used in AC 50Hz, rated working voltage 230V single-phase power distribution system, to meet the SPDIII. test, its open circuit voltage peak to 10kV (1.2/50μs), short circuit current to 5kA (8/20μs), suppress ...
|
|
CHINT/CHINT Power Distribution Appliance NA8 Series Universal Circuit Breaker
Product Overview
NA8 series universal circuit breaker rated working current from 200A to 7500A, rated limit short-circuit breaking capacity up to 150kA, rated working voltage up to AC1140V, ambient temperature of -45 °C-+70°C, NA8 series universal circuit breaker set height ...
|
|
CHINT/CHINT AX-6 auxiliary contacts
AX-6 auxiliary contact is mainly used in AC 50Hz, rated heating current to 6A, rated voltage to 415V or DC rated voltage to 130V line, which is assembled with NB1 series circuit breaker for signal indication of long-distance circuit breaker on/off.
Standards: GB/T 14048.5, IEC 6094 ...
|
|
CHINT/CHINT CJ20 Series AC Contactor CJ20-400
CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.
|
|
CHINT/CHINT Terminal Appliance —NXHB-125 Disconnector
The NXHB-125 disconnector complies with IEC60898 and GB10963 standards. It is suitable for AC 50Hz or 60Hz, rated voltage 250V and below residential single-phase lines, to protect the overload and short circuit of electrical lines. The product has high breaking capacity, small size and a width of only 18mm. Zero, fire ...
|
|
CHINT/CHINT Circuit Breaker NBH-63 1P D4
NBH-63 miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A in the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion of the use, can also be used as a disconnecting switch for disconnecting the line for line and equipment maintenance...
|
|
CHINT/CHINT AL-X1H alarm contact
AL-X1H alarm contact is mainly used in the line with AC rated voltage to 415V or DC rated voltage to 130V, and is assembled with NBH-40 and NBH-63 series circuit breakers for signal indication of remote circuit breaker fault breaking.
The alarm contact is an accessory product that is assembled on the left side of the circuit breaker for use.
|
|
CHINT/CHINT NXHM series disconnector
The disconnector series is mainly used to make and break circuits and isolate power supplies infrequently in the power distribution network.
● Shell Frame Grade: 63A, 125A, 160A, 250A, 400A, 630A, 800A, 1000
● Rated working voltage Ue(AC):400V/415V,690V(63,125 ...
|
|
CHINT/CHINT Terminal Blocks — TC Series
TC is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage to 600V, and rated current to 600A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting.
Standards: ...
|
|
CHINT/CHINT NCH8G Household AC Contactor NCH8G-25/40
NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...
|
|
CHINT/CHINT NCH8G Household AC Contactor NCH8G-40/11
NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...
|
|
CHINT/CHINT Miniature Circuit Breaker NXB-80 withstand voltage 4kV
Introduction: CHINT/CHINT miniature circuit breaker NXB-125G is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection
Product parameters
...
|
|
CHINT/CHINT NBH8LE-40□ residual current action circuit breaker
NBH8LE-40 □ residual current action circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated voltage 230V, rated current to 40A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the circuit breaker can quickly cut off the fault power supply in a very short time, ...
|
|
CHINT/CHINT NH5-125 disconnector
NH5-125 disconnector is mainly suitable for AC 50Hz, rated voltage to 400V, rated current 125A and below in the power distribution and control circuit, mainly as the main switch in the terminal combination electrical appliances, can also be used for infrequent control of various low-power electrical appliances and lighting, widely used in industrial and mining ...
|
|
CHINT/CHINT Terminal Block-JXB Series
JXB series terminal blocks are used for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage to 800V, and rated cross-sectional area of 2.5-70mm2. It is installed on TH35 rails.
Comply with standards: GB/T 14048.7, IEC 60947-7-1.
This article describes ...
|
|
CHINT/CHINT HY23 Series Reverse Switch NF1 Load Type Switch
The NF1 load switch is suitable for electrical circuits with AC 50Hz or 60Hz and voltage 690V and below. It is widely used in power distribution systems and automation systems in construction, electric power, petrochemical and other industries. It is mainly used for the main switch of machine tools, fans and pumps, and can also be used as a small-capacity motor ...
|
|
CHINT/CHINT NP6 series buttons
The NP6 series push button is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 220V, and DC working voltage up to 220V. It is also used in a wide range of fields, including numerical control equipment, instrumentation, and small control equipment, as a main order component or power switch. Indicator type button also ...
|
|
CHINT/CHINT YBLX-WL Series Travel Switch YBLX-WL/CA12
YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program.
Accord with...
|
|
Contact
working hours
