Description: E+H/Endershaus chlorine dioxide sensor Memosens CCS50D, Memosens CCS50D chlorine dioxide sensor is robust and low-maintenance. It provides fast and stable measured values for drinking water, process water, and utility applications. The sensors guarantee an efficient disinfection process with the highest water quality and safety, avoiding excessive chlorine dioxide or ensuring ClO2-free in beverage plants and reverse osmosis processes. The CCS50D is based on Memosens digital technology for maximum process and data integrity and is easy to operate.
Features:
The right sensor for every application: from trace measurements to up to a chlorine dioxide concentration of up to 200 mg/l.
Rapid response, high-precision display of process status, timely measures to respond to process changes and efficient process control.
Increased process safety: Precise and long-term stable measurements enable permanent process monitoring with the lowest required disinfectant concentration.
Flexible installation: The sensor can be mounted in the CCA151 and CCA250 flow-through mounting brackets or in the immersion mounting brackets. Flow rates greater than 5 l/h (CCA151), 30 l/h (CCA250) or 15 cm/s (immersion) are not affected by the flow rate.
Sensor replacement is quick and easy, with longer uptime: Sensors are pre-calibrated in the lab and plug and play in the field.
In combination with the Liquiline multi-parameter transmitter, it is possible to measure other relevant water analysis parameters simultaneously.
Product parameters
Measuring principle
chlorine dioxide
apply
Drinking water: Reliable disinfection is guaranteed
Cooling water: Avoid microbial growth
Food: Ensure food quality
Utilities to ensure that chlorine dioxide appears and disappears safely
peculiarity
Fluorescence chlorine dioxide measurement
Measuring range
Traces: 0... 5 mg/l ClO2
Standard: 0... 20 mg/l ClO2
High: 0... 200 mg/l ClO2
Measuring principle
- Hermetically sealed (coated) sensors
- Connected to a 120 mV power supply, chlorine dioxide (ClO2) on the cathode is reduced to chloride
devise
Fluorescence two-electrode sensor with PVDF coating
Material
Sensor rod: PCV
Diaphragm: PVDF
Laminated cap: PVDF
Seal: FKM
Dimensions
Diameter: 25 mm (0.98 in)
Length: 161 mm (6.34 in)
Process temperature
+0...55°C (32...130°F) without icing
Process pressure
1 bar (14.5 psi)
Temperature sensor
10k NTC
connect
Memosens head
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus chlorine dioxide sensor Memosens CCS50D product, if you are interested in the E+H/Endershaus ultrasonic measurement travel time principle, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
The E+H/Endershaus Compact Thermometer TM311 is IP69 rated
Introduction: E+H/Endershaus Compact Thermometer TM311, a compact thermometer that measures process temperature via a Pt100 temperature sensor (Class A accuracy, four-wire connection). Optionally installed in the transmitter to convert the Pt100 input signal. Models with built-in electronic modules can automatically detect ...
|
|
E+H/Endershaus Gauge Pressure Transmitter Cerabar PMP75 with a measuring range of 100 m to 400 bar
Introduction: E+H/Endershaus Gauge pressure transmitter Cerabar PMP75, a digital pressure transmitter with metal diaphragm seal, is mainly used in the process industry and the hygienic industry to measure the pressure, level, volume and mass of liquids or gases. The transmitter is suitable for high temperature and high pressure occasions, ...
|
|
E+H/Endershaus Tablet Field Xpert SMT70 298.5x192x20mm
Description: E+H/Endershaus Tablet Field Xpert SMT70, Tablet Field Xpert SMT70 for equipment configuration and mobile plant asset management in both hazardous and non-hazardous areas. Digital communication to help commissioning and maintenance personnel ...
|
|
E+H/Endershaus Electronic differential pressure transmitter Deltabar FMD71
Description: The E+H/Endershaus electronic differential pressure transmitter Deltabar FMD71 consists of two sensors and a transmitter for level, volume or mass measurement of liquids in a pressurized tank or distillation column/evaporator. One sensor is used for hydrostatic pressure measurement (high pressure) and the other is used for ...
|
|
E+H Proline Promass S 300 Liquid error ± 0.10%
Description: The E+H/Endershaus mass flow meter Proline Promass S 300 is suitable for applications in the food and beverage industry that require optimum cleaning power thanks to its advanced hygienic design. The self-emptying, single-tube system enables sensitive fluid measurements. With the all-in-one ...
|
|
E+H/Endershaus digital pH/ORP combination electrode Memosens CPS96E with a diameter of 12 mm
Introduction: E+H/Endershaus Digital pH/ORP combination sensor Memosens CPS96E, Memosens CPS96E is the specialist for the measurement of fibrous media or media with high suspended solids concentrations (e.g. dispersions, precipitants, emulsions). Open-cell diaphragm design, no risk of contamination, ensure reliable p...
|
|
E+H/Endershaus Ultrasonic Level Measuring Instrument FMU30-AAHEABGHF 4-20 mA
Product introduction: The FMU30-AAHEABGHF all-in-one ultrasonic level measuring instrument is used for non-contact level measurement of liquids, slurries and solids. The sensor emits an ultrasonic pulse signal directly to the surface of the medium. The pulse signal is reflected on the surface of the medium, and the reflected signal is received by the sensor. Ceremony...
|
|
E+H/Endershaus Sheath TA560 insertion depth 5 mm
Introduction: E+H/Endershaus Sheath TA560, because of the harsh process conditions, the strength of the protective casing must be precisely calculated. Dye penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the quality of materials and processes.
|
|
E+H/Endershaus Guided Wave Radar Measuring Travel Time Principle Levelflex FMP57
Introduction: E+H/Endershaus Guided Wave Radar Measuring Travel Time Principle Levelflex FMP57
Features:
Reliable measurement even under variable measuring product or process conditions
HistoROM integrated data storage unit for quick and easy commissioning ...
|
|
E+H/Endershaus digital ORP electrode Orbipore CPS92D degree of protection IP68
Introduction: E+H/Endershaus Digital ORP Sensor Orbipore CPS92D, Orbipore CPS92D is a digital pH sensor for the measurement of fibrous media, highly solid-containing media such as suspensions, easy-to-precipitate solutions and emulsions.
Features:
Open-cell diaphragm ...
|
|
E+H/Endershaus turbidity sensor OUSTF10
Description: E+H/Endershaus turbidity sensors OUSTF10 OUSTF10 scattered light turbidity sensors are used to measure miscible fluids in suspended solids, emulsions and process liquids.
Features:
Accurate and highly sensitive purity monitoring for better product quality
...
|
|
E+H/Endershaus Radar Level Measurement Micropilot NMR81 Input 4-20mA
Description: E+H/Endershaus Radar Level Measurement Micropilot NMR81, Micropilot NMR81 can be used for metering transfer and inventory control measurements, is NMi and PTB certified and meets the relevant requirements of R85 and API 3.1B standards. NMR81 is particularly suitable for measurements in free space ...
|
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI56
Introduction: E+H/Endershaus Capacitive Limit Detection Solicap FTI56, Solicap FTI56 fully insulated or semi-insulated cable probes are rugged for the detection of fine and coarse solids. With its automatic adhesion compensation, the probe offers the highest measurement yield.
|
|
E+H/Endershaus pH electrode Memosens CPS91E is IP68 rated
Description: E+H/Endershaus pH electrode Memosens CPS91E, Memosens CPS91E with Memosens 2.0 digital technology supports extended data storage, service predictive maintenance and IIoT IIoT.
Features:
Reliable measurement of heavily contaminated media: open-hole ...
|
|
E+H/Endershaus Mass Flow Meter CNGmass D8CB Measuring range 0-150kg/h
Introduction: E+H/Endershaus mass flow meter CNGmass D8CB, with the continuous expansion of the natural gas market, compressed natural gas has long become an alternative fuel for transportation vehicles, and is also considered to be the cleanest fuel for burning engines. The new CNGmass is designed for dispensers, using this ...
|
|
E+H/Endershaus PROFIBUS gateway Fieldgate SFG500
Introduction: E+H/Endershaus PROFIBUS gateway Fieldgate SFG500, Fieldgate SFG500 provides independent access paths for access to PROFIBUS networks, and its wide range of applications is supported by various operating modes. The wide range of applications of the Fieldgate SFG500 has been ...
|
|
E+H/Endershaus radar measurement Micropilot FMR62
Introduction: E+H/Endershaus radar measurement Micropilot FMR62, the first 80 GHz level radar designed to comply with the IEC 61508 international functional safety standard.
Features:
The hardware and software are designed in accordance with the IEC 61508 standard, and the redundancy ...
|
|
E+H/Endershaus mass flow meter Proline Promass P 300 Connecting part 316L
Description: The E+H/Endershaus mass flow meter Proline Promass P 300 is a dedicated flow meter for the life sciences industry under sterile conditions. Ideal for biotechnology applications that require strict compliance with guidelines and regulatory requirements. In combination with the all-in-one transmitter, the Promass P 300 ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass F 200 Liquid error ± 0.1%
Description: The E+H/Endershaus mass flow meter Proline Promass F 200 is a well-known high-precision measuring instrument for a wide range of applications. The Promass F 200 flow meter offers industry-ready two-wire technology that can be seamlessly integrated into existing control systems. Pick...
|
|
E+H/Endershaus Proservo NMS80 has a measurement accuracy of 0.4 mm
Introduction: E+H/Endershaus Servo Tank Meter Proservo NMS80, Proservo NMS80 Smart Tank Meter can perform high-precision level measurement in metering transfer and inventory control applications, and is NMi and PTB certified.
Features:
Hardware and software designed in accordance with IEC 615 ...
|
|
Contact
working hours
