Introduction: The E+H/Endershaus field temperature transmitter iTEMP® TMT142 demonstrates unmatched reliability, precision and long-term stability in critical process applications across all industries. The configurable temperature transmitter not only transmits the conversion signal from the RTD sensor and thermocouple, but also uses HART® communication to transmit the resistance and voltage signals. It visualizes the signal on its own backlit display. Robust housing for on-site use and direct connection in the process area. In addition, the operation software can be used to perform simple and fast operation and maintenance via PC.
Features:
Rotatable, illuminated display
Operation, visualization and maintenance can be carried out via PC, for example, with the FieldCare operating software
Sensor monitoring: check for faults and corrosion conditions according to NAMUR NE 89; According to NAMUR NE 43, check for open or short circuits in sensors
Stainless steel housing is available as an option for Eexd applications
The following approvals are available: ATEX (EEx ia, EEx d and dust flame retardant), FM, CSA (IS, NI, XP, DIP)
Galvanic isolation
Min/max process values are recorded
Product parameters
Measuring principle
Field transmitters
input
1 RTD, TC, Ohm, Voltage (mV)
output
1CH 4... 20 mA analog
Auxiliary power supply
10.5...40 V DC (standard)
10.5...30 V DC (explosion-proof)
correspondence
HART communication
Installation
scene
Measurement accuracy
（Pt100，-50...200 °C）<=0.15 K
（Pt100，-58...392 °F）<=0.3 °F
Galvanic isolation
be
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus field temperature transmitter iTEMP® TMT142 product, if you are interested in the temperature transmitter, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Gauge Transmitter Cerabar PMP55 Precision Platinum 0.075%
Introduction: E+H/Endershaus Gauge pressure transmitter Cerabar PMP55, a digital pressure transmitter with metal diaphragm seal, is mainly used in the process industry and the hygienic industry to measure the pressure, level, volume and mass of liquids. The PMP55 is designed for high-pressure and extreme high-temperature measurement applications, ...
|
|
E+H/Endershaus Liquiphant FTL31 vibrating limit level detection
Introduction: E+H/Endershaus Vibrating Limit Detection Liquiphant FTL31, Liquiphant FTL31 Liquid Limit Switches are suitable for measurement in all industries, mainly in the machinery industry.
Features:
Designed to meet the highest quality and environmental sustainability requirements. Self-monitoring ...
|
|
E+H/Endershaus High Temperature Thermocouple Thermometer TAF11
Introduction: E+H/Endershaus High-temperature thermocouple thermometer TAF11, the measuring point with extremely high process temperatures requires the thermometer to be equipped with a ceramic sheath tube and thermocouples made of special metals such as platinum and rhodium. The special material sheath protects the working elements in the measuring process against mechanical damage or chemical ...
|
|
E+H/Endershaus vortex flowmeter Proline Prowirl D 200
Introduction: The E+H/Endershaus vortex flow meter Proline Prowirl D 200 can be installed directly between the flanges and is therefore a functional device for auxiliary process applications with low installation costs. The Prowirl D 200 uses true loop-powered technology to seamlessly integrate ...
|
|
E+H/Endershaus modular RTD thermometer TR88
Introduction: The E+H/Endershaus modular RTD thermometer TR88 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, enhancing the measurement compared to directly connected sensors.
|
|
E+H/Endershaus Bar Protector TA557 inserts to a depth of 5 mm
Introduction: E+H/Endershaus Bar Protective Sleeve TA557, because of the harsh process conditions, the strength of the protective sleeve must be precisely calculated. Dyeing penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the material and workmanship.
|
|
E+H/Endershaus Gauge Pressure Transmitter Cerabar PMP51 Measurement Accuracy: 0.15%
Description: E+H/Endershaus Gauge pressure transmitter Cerabar PMP51, a digital pressure transmitter with a metal diaphragm, is mainly used for pressure, level, volume and mass measurement of liquids or gases in the process and hygiene industries. PMP51 is designed for high-voltage measurement applications, with a maximum working pressure of ...
|
|
E+H/Endershaus Digital fluorescence dissolved oxygen sensor Memosens COS81E
Description: E+H/Endershaus digital fluorescence dissolved oxygen sensor Memosens COS81E, Memosens COS81E digital fluorescence dissolved oxygen sensor, ideal for hygienic applications.
Features:
The Memosens COS81E follows the EHEDG and ASM...
|
|
E+H/Endershaus Average Temperature Measurement Prothermo NMT539
Introduction: E+H/Endershaus Average Temperature Measurement Prothermo NMT539, Prothermo NMT539 intelligent HART signal converter, for use with average temperature sensors and underwater interface probes. Average temperature is measured with an accurate multi-point Pt100 element. NMT539 via HART...
|
|
E+H/Endershaus Integrated Conductivity Measurement Smartec CLD18 with IP69 degree of protection
Introduction: E+H/Endershaus The Smartec CLD18 is an economical solution for a wide range of applications in the beverage industry, using small pipes and ring measurements as switches. Integrated sensor and transmitter structure, anti-dry...
|
|
E+H/Endershaus High Temperature Thermocouple Thermometer TAF12T
Introduction: E+H/Endershaus High-temperature thermocouple thermometer TAF12T, the measuring point with extremely high process temperatures requires the thermometer to be equipped with a ceramic sheath tube and a thermocouple made of special metals such as platinum and rhodium.
Features:
The sheath is made of innovative materials for increased durability and ...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11371
Introduction: E+H/Endershaus Conductive Limit Detection Single-rod Probe 11371, 11371 probe is used for limit detection of food liquids, such as milk, beer, juice, etc. The probe is made of corrosion-resistant insulating material with CIP/SIP function, making it ideal for use in the food industry.
Give birth...
|
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI55
Introduction: E+H/Endershaus Capacitive Limit Detection The Solicap FTI55 and Solicap FTI55 fully or semi-insulated rod probes can be used for the point detection of fine and coarse solids.
Features:
Ultra-rugged probes designed for demanding process conditions
...
|
|
E+H/Endershaus Bar Protector TA555 has a maximum insertion depth of 5 mm
Introduction: E+H/Endershaus Bar Protective Sleeve TA555, because of the harsh process conditions, the strength of the protective sleeve must be precisely calculated. Dyeing penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the material and workmanship.
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT84
Introduction: The E+H/Endershaus temperature transmitter iTEMP® TMT84 offers excellent reliability, accuracy and long-term stability for critical processes in all industries, not only for the transmission of thermoresistive (RTD) and thermocouple (TC) digital conversion signals, but also for the use of PRO ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass F 200 Liquid error ± 0.1%
Description: The E+H/Endershaus mass flow meter Proline Promass F 200 is a well-known high-precision measuring instrument for a wide range of applications. The Promass F 200 flow meter offers industry-ready two-wire technology that can be seamlessly integrated into existing control systems. Pick...
|
|
E+H/Endershaus digital conductivity sensor Indumax CLS50D
Description: E+H/Endershaus Digital Conductivity Sensor Indumax CLS50D, Indumax CLS50D is an inductive conductivity sensor for standard, hazardous and high-temperature environments.
Features:
Durable, chemically resistant, suitable for harsh conditions ...
|
|
E+H/Endershaus Capacitive Limit Detection Minicap FTC260
Introduction: E+H/Endershaus Capacitive Limit Detection Minicap FTC260, Minicap FTC260 rod probe is simple and economical for solid bulk material limit level detection, especially for corrosive or large amounts of adhesion formed media. This probe is designed for lightweight, solid, ...
|
|
E+H/Endershaus Protective Sleeve TW10 Insertion depth 4 mm
Introduction: E+H/Endershaus Protective Sleeve TW10, this metal protective sleeve is an important component for temperature measurement points in almost all industrial processes, especially in the fine chemical industry. It protects the measuring cell or sensor element from corrosion by the process medium and protects the temperature sensor itself from high pressures and ...
|
|
E+H/Endershaus Ultrasonic Level Measuring Instrument FMU30-AAHEAAGGF
Product introduction: The FMU30-AAHEAAGGF all-in-one ultrasonic level measuring instrument is used for non-contact level measurement of liquids, slurries and solids. The sensor emits an ultrasonic pulse signal directly to the surface of the medium. The pulse signal is reflected on the surface of the medium, and the reflected signal is received by the sensor. Ceremony...
|
|
Contact
working hours
