Mini slim BGS reflective M8 connector type 15mm PR-MB15CN
specification
| Model | PR-MB15CN | | type | BGS reflection | | output | NPN | | shape | Compact and slender | | Connection patterns | M8 connector: 4-pin | | Detection distance | 1 to 15 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | Approx. ø3mm (at 15mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | About 13 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series PR-MB15CN products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB250C3P
Square Reflective M8 connector type 250mm
*1 The M8 connector (3-pin) type does not have an external input function.
*2 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to ...
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A5
Sensor head-controller cable 5m CB-A5
Length: 5 m
Weight: approx. 400 g
This article introduces the KEYENCE/KEYENCE sensor head-controller cable CB-A5 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-85497
Connector cable M8L word 2m PVC
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series OP-85497 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.
|
|
LR-T series LR-TB2000C TOF laser sensor with built-in KEYENCE/KEYENCE amplifier
Detection distance: 2m M12 connector cable type Laser classification 2
specification
*1 Can be displayed from 50 to 2200.
*2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.
*3 I/O can be advanced from the following combinations ...
|
|
KEYENCE/KEYENCE displacement sensor EX-V series output voltage ± 5V
Introduction: KEYENCE/KEYENCE Current Displacement Transducer EX-V Series High Speed, High Accuracy, This digital eddy current displacement transducer has high resolution and a sampling rate of 40,000 samples per second, and has high resolution and high accuracy due to the use of FLL lines.
...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51P3
Mini Slim Permeable Cable Type 1.2m PR-M51P3
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-M51P3 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, I ...
|
|
KEYENCE/KEYENCE Sensor Head LJ-G080
Enclosure rating: IP67 (IEC60529)
Ambient light: Incandescent/fluorescent: 5,000 lux*5 max
Ambient temperature: 0 to +50 °C
Relative humidity: 35 to 85 % RH (non-condensing)
Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...
|
|
KEYENCE/KEYENCE Photoelectric Sensor PZ-V Series The response time is 1ms
Introduction: KEYENCE's stand-alone photoelectric sensor PZ-V/M series uses a laser sensor with distance principle detection, which is not easily affected by the color and tilt of the workpiece, and performs stable detection. Unaffected by highly reflective target backgrounds, it is highly resistant to dust and dirt.
...
|
|
KEYENCE/KEYENCE Sensor Head LJ-V7060K
Sensor head LJ-V7060K Reference distance: 54.6 mm
Enclosure rating: IP67 (IEC60529)*7
Ambient light: Incandescent lamp: 10,000 lux*8 max
Ambient temperature: 0 to +45 °C*9
Relative humidity: 85%RH or less (non-condensing)
Earthquake resistance: ...
|
|
KEYENCE/KEYENCE Digital Ultrasonic Sensors FW Series UL Approved
Introduction: KEYENCE/KEYENCE Digital Ultrasonic Sensor FW Series uses a new algorithm A.W.S. (Active Wave Stabilizer) to achieve stable inspection without the influence of workpiece differences and ambient light. At the same time, this product has obtained CE mark certification and UL certification, which can be assured to make ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H020
Sensor head spot type LK-H020
specification
This article introduces KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H020 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor FS-V30 Series has a response speed of 33μs
Introduction:High-power, ultra-simple, high-reliability FS-V30 digital fiber optic sensor. The high-power beam provides stable detection in demanding environments.
Product parameters
This article introduces the KEYENCE/KEYENCE Fiber Optic Sensor F...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100CP
Square Reflective Type M8 Connector Type 100mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on the IE ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series LR-TB2000
Detection distance: 2m Cable type Laser classification 2
Reflective laser sensor with detection distance** up to 5 meters in length, regardless of installation limitations. The distance detection principle is not affected by the surface of the object, and can detect a variety of workpieces.
specification
*1 Can be displayed from 50 to 2200.
*2 FDA(CD ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87905
Sensor head cable 10 m
Type: Sensor head-to-amplifier cable
Length: 10 m
Weight: approx. 400 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87905 product, if you are interested in KEYENCE/KEYENCE products, please also contact us ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87950
LAN cable (RJ-45-RJ-45) 1 m
Type: LAN cable
Length: 1 m
Weight: approx. 60 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87950 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Amplifier PR-M/F Series OP-87670
Slit plate φ0.5 square use
Type: Slender for flat surfaces
Number of Builts: 1pcs
Slit plate size: ø0.5
Material: SUS304
Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only
Weight; About 1 g
This article introduces KEYENCE's ...
|
|
KEYENCE/KEYENCE P-M/F Series P-MB15C3PL PHOTOELECTRIC SENSOR WITH BUILT-IN ULTRA-COMPACT AMPLIFIER
Mini Slim BGS Reflective M8 Connector Type 15mm PR-MB15C3PL
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".
Example) P ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51N1
Square Permeable Cable Type 0.6m PR-F51N1
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-F51N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87457
Ethernet cable (M12 4pin-RJ-45) NFPA79 standard standard cable 2 m
Type: NFPA79 standard Ethernet cable
End shape: M12 4pin-RJ-45
Length: 2 m
This article introduces the KEYENCE/KEYENCE multi-point laser sensor OP-87457 ...
|
|
Contact
working hours
